BLUE STAR SVMSE-TOY Side Mirror Switch Extender Power Switch Instruction Manual
- June 4, 2024
- BLUE STAR
Table of Contents
BLUE STAR SVMSE-TOY Side Mirror Switch Extender Power Switch
Thank you for purchasing a Blue Star Automove Switch Extension for your adapve vehicle. With the installaon of a Blue Star side-view mirror switch extension, those with various upper body dexterity challenges will be able to increase control of automove side-view mirror adjustments with relave ease. Once professionally installed, the switch extension will funcon as a leverage bar on the rotang switch that easily moves side to side or pushed down with clinched fingers, hand palms or orthopedic body extensions.
Technical Note
This switch extension is primarily designed for current and late model Toyota
Vehicles that are equiped with a 0.070 inch diameter side-view mirror
adjustment switch post. There are other vehicle manufacturers with models that
have similar switch posts. As long as the post diameter is smaller than 0.070
inches, this switch extension should operate with the same level of success on
different vehicle makes and models.
Note: The material your switch is machined from is a high-quality type of
plasc called Delrin® made by the Dupont®Corporaon. For a praccal explanaon,
that means this material is much stronger and more stable than 3D printer
plasc. Delrin® will not melt in a hot car nor will it retain heat and burn
fingers when le sing in the hot sun.
- If sizing help is needed: Please contact Blue Star Machining and identify to us the diameter of your rotary switch so we can recommend the correct length screw you need.
Before Installing the Switch Extension
Blue Star Machining strongly recommends your automove switch extension(s) be installed by a qualified auto mechanic that specializes in adapve equipment for physically disabled drivers. As there are varying degrees of abilies among potenal users, Blue Star Machining recommends checking with your physician or physical rehabilitaon counselor before using any automove switch extensions. It is your responsibility to make certain this product is appropriate and safe for you to use and operate. Blue Star Machining will not be responsible for careless operang and shall in no event be liable for any incidental or consequenal damages with respect to economic loss, injury, or damage to property.
Installing the Switch Extension
- Before installing the switch extension, first take time to clean the adjustment gymble with rubbing alcohol or another suitable detergent. It is important to remove any oils or dirt build up on all contact surface areas before the screw is torqued down and the extension is in place.
- Align the switch extension to the top portion of the post . Making sure it mounts near the top portion of the gymble.
(See Fig. A )
While using the included allen hex key, turn the set screw snugly while only compress the silicon grip pad to not much more than 50% of its thickness. Take care not to over tighten the set screw as this can easily strip the allen hex key.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>