BW1829 Smart Watch Instruction Manual
- June 9, 2024
- Smart
Table of Contents
BW1829 Smart Watch
If the steel belt is
too short,we can provide free strap acces-sories for extending the strap,which
will arrive in 1-3 days! please contact the customer service or the email
address.
For information on service:
Please contact the retailer where the watch was purchase for information
regarding repairs and warranty. You can also contact Qur Customer Service
Department bv email:
**[email protected]
The authorized European Representative information：
Name：APEX CE SPECIALISTS LIMITED
Add：UNIT 3D NORTH POINT HOUSE,NORTH
POINT BUSINESS PARK, NEW MALLOW
ROAD,CORK, T23AT2P, IRELAND
Contact：Wells
Tel：+353212066339
E-Mail：[email protected]
CE Report NO : LST210475014ER
Downloading the App**
Scan the following QR code, download and install the App.
Connect Bluetooth in APP: Bw326
Charging and Active
Charging the device to active before the first time using:
To charge your device, plug the charging cable into the adapter or USB port on
your computer.
Note : Do not use a USB charger with a current exceeding 1A Charge the
bracelet
Pairing
The MAC address on the
“Setting”-“About” page could help you identify your device on the scanning
list.
Use the Touch Screen
Notifications
Note: Find notification settings in phone settings, turn on WhatsApp,
Facebook, Twitter, Phone, SMS.
Keep connected, if this function is enabled, the bracelet will vibrate when
there are messages such as Wechat, Facebook, twitter and so on. (Give the APP
access to system permission).
Why the watch can’t
receive the message notification?
Since Android mobile phone background will automatically clean up the App
which not commonly used, it will cause the watch connection to drop and no
longer push the message.
- Make sure turn on message push in Dafit setting.
- Make sure the message can be displayed in mobile phone’s notification bar, message notification is pushed by reading the phone notification bar, the watch can’t get notification if the message push closed in mobile phone setting.
1f the notification still cannot be displayed, please try to reset the watch, or reinstall the APP.
Smart Watch Features
-
Sleep
If you keep wearing Smart Watch in your sleep, it can provide the hours slept and quality of sleep stats on both the screen and the APP.
NOTE: Sleep stats reset to zero at 8:00 pm. -
Heart Rate Test
The Smart Watch could record your heart rate all day.
You also could tap on the page to start measuring heart rate. -
STEPS
Smart Watch automatically tracks
Steps taken on the screen. NOTE: Your movement stats reset to zero at midnight. -
Training
Tap the training icon on the menu to start a new training measure recording, there are 8 sport modes to be chosen. The last training recording will be shown on the training page. -
Weather
It could show the weather info of current and tomorrow on the weather page.
Weather info is synced after connecting with the APP, it will not be updated after a long disconnected. -
Messages Reminder
The device can sync incoming notifications from Twitter, Facebook,
Whatsapp, Instagram etc.
Recently 5 messages can be stored.
Note: You can switch of/off the incoming notification in the APP. -
Remote Shutter
After connecting the device, you can remote control the camera on your phone.
Note: some phones need to be turned on DAFITAPP realizes this function -
Player Shutter
After connecting the device, you can remote control the music player on your phone. -
Blood Pressure Test
Tap on the blood pressure page to start measuring your blood pressure.
On the blood pressure page, It can show the blood pressure measured data of the last times. -
Other Features
Other features include stopwatch, alarm, timer, brightness, mute on/off, theater mode, factory reset, power off and about.
-
Stop Watch
Tap the start button on stopwatch page to start timing, and tap the stop button to stop timing.
-
Silent Alarms
Set up the alarm on the APP, the device will vibrate to remind on time.
This alarm switch requires Set to open in DAFIT
-
Spo2 Test
Tap the Sp02 page to start measuring your Sp02.
On the Sp02 page, It can show the SpO2 measured data of the last times.
-
Remind to Move
The device will vibrate to remind you to make a relax after 1 hour sitting.
Note: You can switch on/off the feature in the APP.
-
Remind to Drink
The smart watch will remind you Time to Drink Some Water” at the planned drinking time.
Note: You can set the feature in tht APP.
-
Theater Mode
The device will turn off the vibration and turn down the brightness when the theater mode is turned on.
Note: You can turn on/off the theater mode in the control center.
Getting to Know Your Device
-
Using in Wet Conditions
Your device is water-resistant, which means it is rain-proof and splash-proof and can stand up to even the sweatiest workout.
NOTE: Do not swim with your Smart Bracelet. We also don’t recommend showering with your wristband; though the water won’t hurt the device, wearing it 24/7 does not give your skin a chance to breathe. Whenever you get your bracelet wet, dry it thoroughly before putting it back on. -
Using Quick View
With Quick View you can check the time or the message form your phone on your Smart Bracelet without taping. Just turn your wrist towards you and the time screen will appear for a few seconds.
General Info & Specifications
-
Environmental Conditions
Operating temperature: 14°F to 122°F (-10°C to 50°C)
Non-operating temperature:-4°F to 140°F (-20°C to 60°C) -
Size
Fits a wrist between 5.5 and 7.7 inches in circumference. -
Disposal and Recycling
Please kindly be aware that it is the consumer’s responsibility to properly dispose and recycle Smart Bracelet and accompanying components. Do not dispose of Smart Bracelet with common household waste, the Smart Bracelet unit is considered electronic waste and should be disposed of at your Ilocal electronic equipment collection facility.
For more information, please contact your local electronic equipment waste management authority or the retailer where you bought the product.