GIGABYTE How to Configure ErP Lot 9 in BIOS Setup User Guide
- June 9, 2024
- Gigabyte
Table of Contents
GIGABYTE How to Configure ErP Lot 9 in BIOS Setup User Guide
How to Configure ErP Lot 9 in BIOS Setup
Follow the instructions to enable the ErP Lot 9 function.
-
Access the BIOS Setup program by pressing the
key during the POST when the power is turned on. -
Go to Advanced Page.
-
Select ErP Mode and select Lot 9.
-
Go to Save & Exit Page to save the configuration.
-
When ErP Mode is enabled, fan speed will be adjusted and any redundant PSU will be placed into a standby state (“Cold Redundancy”) in order to decrease power consumption when the server is in idle mode.
NOTE!
ErP mode will be enabled only when no add-on cards are installed in the server
or motherboard, and BMC firmware has also been updated to the latest version
with ErP mode support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>