Vortex TAB10 TFT Display User Guide

Vortex TAB10 TFT Display

Attention

This handbook contains important security measures and the correct use of the product information, in order to avoid accidents. PLs make sure to reading the manual carefully before use the device.

• Please don’t be in high temperature, moisture or very dust place

• Please don’t be in high temperature, Especially in summer don’t put the device in the car when Windows closed.

• Avoid fall or Violent collision of the device, don’t make the TFT display screen were violent tremor, This could cause TFT display screen abnormal or damage.

• Please choose the appropriate volume, Use headphones should not be too big volume, If feel tinnitus, Lower the volume or stop using it

• please charge In the following condition,
  A, The battery power ICONS shows have no power
  B, The system automatically shut off, startup after power off soon
  C, Operation buttons no response
  D, The machine that the top right corner show red icons

• When the device in the format or ongoing upload and download file, please don’t suddenly disconnect, This could cause application error.

• For those who because of damage to the product, repair, or other causes of erased the memory, The company shall not be liable for any responsibility, please follow the user manual for the standardized operation to use the device.

• Don’t disassemble the product, don’t use alcohol, Thinner or benzene to scrubbing products

• • Don’t use the device one of the place of prohibit to use electronic equipment in regional (such as the plane)
  • Please don’t using the Tablet PC when you in driving or walking down the street,
  • USB just only be used for data transmission The company reserves the right to improve product, products specification and design have any change, The information is subject to changes without prior notice.
  (This tablet is no waterproof function)
  [ Remark] All pictures in this manual is just for your reference. products specification and design have any change, The information is subject to changes without prior notice.

Desk

Touch panel

Capacitive touch panel: In The Operation, to click, dragging on the touch panel

POWER

startup: Long Press and hold the power button, the system will enter the main interface
shutdown: In the main menu interface, Press the power button about 5 second to shutdown, The system can hint “power off” option, Clicke “ok”. you can safely shut down
Lock screen: Short press Power button to lock screen or unlock screen. Remark 1.When power is empty, system will shut down automatically. 2.lllegal turn off the device, restart will scan and restore the disk, it may take longer time to enter into system

BACK

Short Press BACK button will return the last interface,

MIC

Recording

Volume +, Volumethe

buttons on top Volume+, Volume-achieve changes in the volume.

earphone jack

3.5 mm standard earphone jack

TF card

TF-CARD solt: external T-FLASH card

Mini USB

MiniUSB jack: you can use it to connect the computer for data transmission, charging and external connection USB flash drive

DC Adapter

For charging. your tablet battery
1.1 O Recovery
When the Tablet under the condition of the crash, upgrade firmware.

First use

Battery management and charge

Before first use, please set the device’s battery is fully charged Just need to connect the adaptor or USB interface, then you can charge
The first two times charging please keep about 6 hours, after that you just need 4 hours to charge.
[ Remark) : This tablet using Built-in type polymer battery, Charge must be to choose standard adaptor (Input: AC110-240V 50/60Hz Max, 180MA .. Output: DC5.0-5.5V/1.5A), this device without supply DC charging, USB interface can charge, Choose USB interface to charger During the charging, the battery icon will scroll When finished charging, battery icon will become green and stop rolling In order to prolong the service life of the machine, suggest use out battery power before charge it [ Remark) :

1. If you long time don’t to use this Tablet, ,in order to avoid power consumption caused damage, pls charge/play the battery once a month.
2. After low battery shut down . connect DC adaptor, device will remind low battery , charging, need to wait some time until the battery is enough power to enter into main menu.
3. Device charging should be in standby status for reach normal charging time. Because with device and screen consumption.it may cause longer

Connection with PC

Use USB cable to connect device to PC, device will pop up the USB connection window ,click Turn on USB storage to connect to PC

Into the load mode, you can copy, delete the file on the device and the file on the memory card.

Equipment operation interface

Main interface describe

After startup will enter the main interface

In the main interface, you can :
Management main interface software ICONS: long press the icons 3 second, after the icons will biger. then you can drag anywhere in the interface

Delete icons: long press the icons 3 second, drag the icons to the Recycle Bin icon, once it become red, Loosen your hand, after that you can delete icon You touch the screen keep a time, appear the dialog box “Add yo Home screen” as shown below:

status bar describe

• The status bar above of the screen
  Top left display main interface software, T-Flash card, USB connection status and so on
  Top right display the battery, battery charge icons, current time, set time, Settings Menu, ESC button.

Use touch panel

Device equipped with a touch screen. Following the main touch screen area is described, and describes some of the tips for how to use the touch screen.
No matter which interface you are on the screen, can go back to main screen through pressing the soft key  on the bottom right corner of the main screen.
[ Attention )The main screen soft  key Functions as the machine back key
In different applications, by tapping the back soft key  on the bottom right corner on the touch screen, you can return to its interface on the upfloor.
In different applications, by tapping the menu key on the upper right corner of touch screen, the screen will appear the operation setting interface as follows, ( Remark) : The main screen soft key functions as the machine manu

In the main interface. you can touch the icon to open the APPs In different browser(file, music, video, pictures). You shift and drag the scroll bar, so that the file list can up or down to roll.

Equipment basic set

Setting: Click setting icons enter setting interface

Silent mode, Volume, Notification ringtone, Audible selection, Screen lock sounds

Application

Manage Application

Unknown sources: Click “Unknown Sources”, then click  OK” Manage application: manager and uninstall Application
[ Remark] : when you Firmware Upgrade, pis close the USB connect How to ~stall?

1. enter  “setting .. >”Application”>”Manage application” And then there will be installed the program list
2. Click you want to uninstall icons, will enter the following interface
3. Click Uninstall, then you can Delete the application
   

Privacy

Factory data reset

Storage

Remove TF card, view of the available storage space [ Remark] : pls touch option “delete SD card”, so that can safety to Remove SD card

Language_ & keyboard

Setting: (Language), text input and automatic error correction options; Select Language: 54 kind of national languages are available Remark: Android system can support 54 kind of language, now Manu interface just support 14 language, Android keyboard: Android keyboard setting Sound on Key-press Auto- capitalization Show suggestions: Display suggested words while typing Auto- complete: Spacebar and punctuation automatically insert highlighted word.

Date & time setting

Set date, set time, Select time zone and select date format

Developer options

Choose USS work attention OTG/HOST/SLAVE ..

About tablet

Apps Install and manage

App installer

This Tablet can support Android APP in market by third party, most Apps can install in the network, can copy to NANO FLASH or SD card.
Click App installer icon, will appear Install, manage, Exit options. Install: Click install, enter Apk install interface Separately for Internal Memory disk and SD Card disk.
Select the APK you would like to install, click it to install. go back to main menu. will display the installed app you just selected. Remark: some 3rd APP must install properly by memory card, downloaded 3rd party app may not install properly on device. Manage: click manage, enter third party interface Click install icon, will enter Action interface

Problem solution

Device can’t to open

1. Check the battery power
2. Connect adaptor first, then check again
3. After charging then can’t to open, pis contacy with the supplier

After startup the screen or the opening picture has beenappear , the the

device appear shutdown

1. Power is not enough, please charge Headset can’t hear the voice
2. Pls check the volume whether set to 0
3. Check the music file wherther damaged. Try playing other music, if the file have damaged may lead to serious noise or hop sounds.

Can copy file or paly music and so on

1. Pis check between computer and device is correct connection
2. check the memory storage space is already full
3. check the USB cable is good or not
4. USB connection is disconnected

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>