NOVY 7550 Hotte centrale Mood Instructions

NOVY 7550 Hotte centrale Mood

 SAFETY AND ASSEMBLY REGULATIONS

Further information on Novy products, accessories and services may be found on the internet: www.novy.com.
These are the installation instructions for the appliance as shown on the front. The directions for use are in a separate booklet supplied with the appliance.
These installation instructions make use of a number of symbols. The meanings of the symbols are shown below.

Observe this instruction in order to prevent injury and damage to property.

Warnings before installation

•  This appliance complies with the applicable safety instructions. However, inexpert installation may cause personal injury or damage to the appliance.
•  The appliance is intended exclusively for household use (preparation of food) and excludes all other do-mestic, commercial or industrial use. Do not use the appliance outside.
•  Check the condition of the appliance and the installation fittings as soon as you remove them from the packaging. Remove the appliance from the packaging with care. Do not use sharp knives to open the packaging.
•  Do not install the appliance if it is damaged, and in that case inform Novy.
•  Check on the basis of the drawing A that all the materials for installation have been supplied. The grease filters are in the appliance.
•  Novy is not liable for damage resulting from incorrect assembly, incorrect connection, incorrect use or in-correct operation.
•  The installation and electrical connection of the appliance should be left to a recognised expert.
•  Safety is guaranteed only with expert installation in accordance with the installation manual. The installing technician is responsible for proper operation at the installation location.
•  For easier installation of the appliance, it is advisable to carry it out with at least 2 people.
•  Read the directions for use and the installation instructions before installing and using this appliance. You will find important information here for the assembly and use of the appliance.
•  Metal parts may have sharp edges, and you may in-jure yourself on them. For that reason, wear protective gloves during installation.

Installation instructions for the appliance

•  Ensure that the structure on or in which the appliance is to be installed can bear its weight.
•  Faulty or damaged parts may only be replaced by original Novy parts.
• The larger the distance between the appliance and the hob, the less easily the cooking vapours can be taken up by the appliance. For this reason, pay heed to the stated (recommended) installation height.
•  If a different distance is specified in the installation instructions for the gas hob, the largest distance in-dicated applies.
•  In order to ensure that the cooking vapours are taken up in an optimal way, the appliance, or the structure into which the appliance is being installed, should extend over the hob. When using your own structure, ensure that the appliance is installed centred above the hob.
• For optimal operation, the hob should not be larger than the appliance or the structure into which the appliance is installed.

Rrecirculation
The cooker hood can only be used as a recirculation cooker hood. The cooking vapours are cleaned by the grease filters and an odour filter and returned to the kitchen.

Air supply
With an appliance with recirculation, there must be a minimum of ventilation in the room where the appliance has been installed / is positioned. Ventilation can be provided by the overall ventilation in the home or by tilting a window or opening a door.

Installation instructions for the outlet

•  The appliance may only be connected with the power plug to a socket with an earth (230 V – 50 Hz).
•  If connection with a main plug is not possible, an all-pole isolating switch must be integrated into the permanent electrical installation according to the conditions of overvoltage category III and according to the installation regulations. Only a licensed professional may connect appliances without plugs.
•  Safety is only assured when the appliance is connected to an earth cable in accordance with the instructions laid down.
•  The appliance must be able to be disconnected from the power at any desired point.
•  Do not use an extension cable for the connection to the electrical mains.
•  Electric shock: never switch on a faulty appliance, this could cause an electric shock. Take the power plug out of the socket, or switch off at the distribution cabinet. Contact the Novy service department.
• Repairs and replacing faulty or damaged wiring must only be carried out by technicians who have undergone instruction by Novy.
•  Moisture that has got into the appliance may cause an electric shock. Do not use a high pressure or steam cleaner.

 ACCESSORIES

Kit with longer hanging cables
Optionally, an accessory with four longer cables of 3,5 metres can be ordered (item number 7550100).

Ceiling plate
The optional ceiling plate provides an even tighter finish to the ceiling.

• Ceiling plate white              7550.500
•  Ceiling plate black              7552.500
•  Ceiling plate mineral black  7552.510

InTouch
InTouch offers you the possibility to control the Novy cooker hood from the Novy InTouch induction cooking plate. The ceiling hood may, as a default, be combined with InTouch induction cooking plates. Visit the website for the different models of induction cooking plates with InTouch. Further information on Novy products, accessories and services may be found on the internet: www.novy.com.

•  Do NOT remove the hood from the packaging. The hood will be mounted while still in the box. When the hood has been fully mounted at the optimum height, the box can be re-moved from the hood. Turn the box so the text “FRONT” is in the correct position. “FRONT” must be facing the side where the person cooking will be able to see the display on the hood.
•  The recommended mounting height for an electric or ceramic cooking plate is min. 600 mm and max. 850 mm. The mounting height for a gas or induction cooking plate is min. 650 mm and max. 850 mm.
•  Because of the substantial own weight of the hood, the ceiling must have sufficient load bearing capacity.
•  Bear in mind that the electrical connection must be placed behind the right-hand mounting plate.
  

1. Attaching the mounting plates

   •  Take the drilling jig from this mounting instruction (see the centre page of this booklet).
   •  Cut the drilling jib in half as indicated.
   •  Mark the central line of the drilling jigs. Make sure that the hood is mounted in the centre over the cooking plate.
   • The distance between the centres of both mounting plates is 840 mm (or 420 mm measured from the central line).
   • Mark the 4 drilling holes on each mounting plate.
   • In view of the substantial own weight of the hood, the ceiling must have sufficient load bearing capacity.
   • Bear in mind that the electrical connec-tion must be placed behind the right-hand mounting plate.

2. Attach each of the mounting plates with four screws (906.192) unto the ceiling. Here pay attention to the position of the electrical connection.

   • Lift up the packaging including the hood with at least 2 persons. Make sure that the connecting cable is on the right-hand side.
   • Position the packaging/hood at a certain height, making sure that the suspension ca-bles can easily be placed into the mounting plates.

3. Take the ends of the four suspension cables and insert them into the holes of the mounting plates and pull them through the slot downwards, as shown in the figure. The height adjustment will be dealt with later (illustration 6).
   

4. Electrical connectionSlide the closing plate over the suspension cables until it almost touches the mounting plate. Connect the power supply cable to the connector. Replacement of the connection cable is to be done by a qualified installer. The amperage and the energy consumption have been indicated on the specification label attached to the inside of the hood.

5. Slide both closing plates over the cables until they touch the mounting plates. Attach each closing plate with two screws (906.147) into the mounting plate.
   

6. Adjust the height
   

• The height of the hood with respect to the ceiling can be between 250 and 1500 mm.
•  The recommended mounting height for an electrical or ceramic cooking plate is min. 600 mm and max. 850 mm.
• The mounting height for a gas or induction cooking plate is min. 650 mm and max. 850 mm.

The cable clamps are found at the place where the cable enters the hood. The cable can be extended by pressing this cable clamp. The cable will be locked as soon as the cable clamp is no longer pressed. The cable can still be slid in at this moment. The visible length of the power supply cable can be adjusted by sliding it into the hood.

• While adjusting the cables, support the hood in order to prevent it from falling.
• To avoid draughts above the cooking surface, the minimum distance between cooker hood and ceiling should be at least 250 mm.
• Do not exceed the maximum height to the ceiling (1500 mm).

After adjusting the suspension height, the packaging can be carefully removed from the hood by taking the box down with at least 2 people. Optionally, an accessory with four longer cables of 3,5 metres can be ordered (item number 7550100).

• In order to turn on the hood, the on/off switch must be activated first. This is disabled for servicing the device. The knob is located at the top on the side of the
  connection cable.

Dimensions


7550/7552
SCALE 1:1
NOVY nv reserves the right at any time and without reservation to change the structure and the prices of its products.

NOVY nv
Noordlaan 6
B – 8520 KUURNE
Tel. 056/36.51.00
Fax 056/35.32.51
E-mail: novy@novy.com
www.novy.com
France: Tél: +33 (0)320.940662
Deutschland und Österreich: Tel: +49 (0)511.54.20.771
Nederland: Tel.: +31 (0)88-0119110
United Kingdom: +44 (0)207 866 2493
España: Tel.: +34 938 700 895
Italia: Tel.: +39 039.20.57.501

References

• Specialist in cooker hoods and hobs | Novy - Novy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>