KOHLER K-505 Mendota 60 x 32 Inches Alcove Bath User Guide
- June 9, 2024
- Kohler
Table of Contents
KOHLER K-505 Mendota 60 x 32 Inches Alcove Bath
Mendota®
60″ x 32″ alcove bath
K-505
Features
- Safeguard® slip-resistant surface provides excellent traction underfoot
- 60″L x 32″W x 16-1/4″H
- Standard 5′ x 32″ size for alcove installation
- Integral apron for quick installation
- Integral lumbar support
Material
- KOHLER® enameled cast iron
Installation
- Alcove
- Integral flange
- Left drain
Recommended Products/Accessories
- K-1491 Bath/Whirlpool Pillow
- K-1601 Bath/whirlpool footstop, removable
- K-7213 27″ Cable Bath Drain
- K-7214 27″ Cable Bath Drain
- K-7259 Brass toe tap bath drain
- K-702200-G73 Frameless Sliding Bath Door
- K-702200-L Frameless Sliding Bath Door
- K-706000-D3 Frameless Sliding Bath Door
- K-706000-L 62″ H sliding bath door with 1/4″ – thick glass K-706003-L Frameless Sliding Bath Door
- K-706004-D3 Frameless Sliding Bath Door
- K-706004-L Frameless Sliding Bath Door
- K-706007-L Frameless Sliding Bath Door
- K-702200-6L 58″ H sliding bath door with 1/4″ – thick glass K-23726 Drain treatment
- K-23725 Cast iron cleaner
- K-31796 Above-the-floor bath drain kit
- K-31798 bath drain kit
Codes/Standards
- ASME A112.19.1/CSA B45.2
- ASTM F462
- ADA
- ICC/ANSI A117.1
KOHLER® Enameled Cast Iron Bath and Shower Base Lifetime Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes Color tiles intended for reference only.
DIMENSION
No change in measurements if connected with drain illustrated. (K-7160-TF)
Technical Information
All product dimensions are nominal.
- Installation: Three-wall alcove
- Drain location: Left
- Basin area, bottom: 46″ x 20″ (1168 mm x 508 mm)
- Basin area, top: 54″ x 24″ (1372 mm x 610 mm)
- Weight: 351 lbs (159.2 kg)
- Minimum floor load: 56 lbs/ft² (273.4 kg/m²)
- Water depth: 10-7/8″ (276 mm)
- Water capacity: 45 gal (170.3 L)
- Minimum flat for door: 2″ (51 mm)
Notes
Measure your actual product for rough-in details.
Install this product according to the installation instructions.
The hot water supply should be 70% of the capacity of the bath or greater.
Installations will vary.
Measure your actual product for roughing-in details.
Hot water supply should be 70% of capacity or greater. Installations will
vary.
ADA compliant when installed to the specific requirements of these
regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com.
1-21-2023 21:28 – US/CA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>