Minoston MT10W WiFi Countdown Timer Switch User Manual
- June 9, 2024
- Minoston
Table of Contents
Minoston MT10W WiFi Countdown Timer Switch
Wi-Fi Countdown Timer Switch
Specifications
- Power: 120VAC, 60Hz / Tungsten: 1200W
- Resistive: 1800W / Motor: 1/2 HP
- Time Delay: 5, 10, 30, 60 mins, 2 or 4 hours
- Humidity: 95% RH, non-condensing
- Operating Temperature: 32° to 131° F (0° to 55° C)
If you have any questions, please contact us at
Scan QR code or visit ask@minoston.com and www.minoston.com
How it Works
-
A Download the app Scan the QR code above or search Minoston on the Apple App Store or on Google Play
-
B Technical Guidance
The Wi-Fi Countdown Timer Switch can be also used with Amazon Echo and Google Home. Please scan the QR code below and follow the instructions if you have any trouble pairing with them. -
C EASY TO SET UP QR code
-
D Voice control Compatible with Amazon Alexa and Google Assistant
-
Follow the steps in the Amazon Alexa or Google Assistant app to connect the Minoston app or select “Support” in the Minoston app
FCC warning
This device complies with Part 15 of the FCC Rules. Operation Is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. changes or modifications, not expressiy approved by the party responsible- le for compliance could void the user’s authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance 20cm between the radiator& your body.
CAUTION – PLEASE READ!
This device is intended for installation in accordance with the National
Electric Code and local regulations in the United States, or the Canadian
Electrical Code and local regulations in Canada. If you are unsure or
uncomfortable about performing this installation consult a qualified
electrician.
MEDICAL EQUIPMENT
Please DO NOT use this plug to control Medical or Life Support equipment. This
device should never be used to control the On/Off status of Medical and/or
Life Support equipment.
OTHER WARNINGS
Risk of Fire / Risk of Electrical Shock / Risk of Burns
IMPORTANT SAFETY INSTRUCTIONS
- READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
- Read and follow all instructions that are on the product or provided with the product.
- do not use an extension cord.
- Reference the National Electrical Code, NFPA 70, specifically for the installation of wiring andclearances from power and lighting conductors.
- Installation work and electrical wiring must be done by qualified person(s) in accordance with allapplicable codes and standards, including fire-rated construction.
- do not install or use within 10 feet of a pool
WARNING:
Risk of Electric Shock. When used outdoors, install only to a covered Class A
GFCI-protected receptacle that is weatherproof with the power unit connected
to the receptacle. If one is not provided, contact a qualified electrician for
proper installation. Ensure that the power unit and cord do not interfere with
completely closing the receptacle cover.
WARNING:
Risk of Electric Shock. Mount the unit at a height greater than 1 foot from
the ground surface
WARNING:
Risk of Electric fire. install only to a receptacle protected by a 20A branch
circuit over current protection.
SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions.