70mai Car Reversing Rear Camera User Manual
- June 9, 2024
- 70mai
Table of Contents
70mai Car Reversing Rear Camera
Product Overview
Please read this manual carefully before using the product and keep it in a
safe place.
- Rear Camera
- Mount
- Rear Camera Lead Wire
- Joint (Port A)
- Joint (Port B)
- Rear Signal Wire
- Mini USB 8PIN Power Port
Note:
Illustrations of the product, accessories and user interface in the user
manual are for reference purposes only. The actual product and functions may
vary due to product enhancements.
Functions
The 70mai rear camera is used as an accessory for 70mai in-car products and needs to be used with a main device.
After the rear camera is installed and connected with the main device correctly, when rear camera recording is enabled, the rear camera can record and store the image from the rear of the vehicle.
Usage
- The 70mai rear camera is powered by the main device. When the main device starts operation, the rear camera will also be turned on automatically. When the main device is turned off or asleep, the rear camera will also be turned off automatically.
- The main device powers the rear camera only when the main device receives power from an external power source. The main device cannot power the rear camera if it is not powered by an external power source.
- The image acquired by the rear camera is stored in the microSD card of the main device automatically. As the storage limit is reached for the microSD card, the earliest front-recorded and rear-recorded images will be overwritten by the latest images and deleted in turn cyclically.
Installation
-
Installing the electrostatic sticker.
Clean your rear windshield and put the electrostatic sticker on the recommended upper area of the windshield, as shown in the figure below. Make sure you remove air bubbles between the sticker and the glass. -
Installing the rear camera.
Peel off the protective film from the adhesive sticker on the base of the mount, and paste the rear camera onto the electrostatic sticker in the dotted area. -
Connecting the power supply.
Connect the rear camera with the rear signal wire (connect ports A and B together). As shown in the figure below, run the wire along the top of the rear windshield, C-pillar, and top of the side windows to the main device. Plug the Mini USB 8PIN power port into the main device(the AV/IN port of the main device). -
Adjusting the dash cam angle.
Turn on the main device and switch to the rear camera recording mode. Adjust the camera angle based on the preview screen to ensure that the camera is facing the back of the vehicle.
Note:
The installation and wiring methods for different vehicles may differ from
what is described in the user manual. The installation shall be conducted by a
professional installer.
Online Guide
Scan the below QR code to access the online guide. The guide provides detailed product information including descriptions of functions. Please carefully read this guide before use in order to avoid damage due to incorrect use.
Precautions
- Please employ a professional installer for installation. The Company shall not be liable for an improper personal operation that causes issues such as a short circuit of the car power source, damage to the car battery, damage to the car interior, and the like.
- The Company shall not be liable for damages due to installation, rather than quality issues of the product itself.
- The Company shall not be liable for failed normal use of this product that does not result from quality issues of this product.
- During installation and use of the product, please do not insert or remove the rear camera while the power is on, otherwise the product may be damaged.
Specifications
- Model: Midrive RC06
- Input: 5V 0.5A
- Resolution: 1920×1080
Packing list
- 70mai Rear Camera ×1
- Rear Signal Wire ×1
- Electrostatic Sticker × 2
- Adhesive Sticker × 2(with 1 pre-applied to the mount)
- User Manual ×1
Service: help@70mai.com.
For further information, please go to www.70mai.com.
Manufacturer: 70mai Co., Ltd.
Address: Room 2220, building 2, No.588, Zixingroad, MinHangDistrict, Shanghai,
China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>