EPSON ET-2830 Series All-in-One Printer Instruction Manual

EPSON ET-2830 Series All-in-One Printer

Read This First The ink for this printer must be handled carefully. Ink may splatter when the ink tanks are being filled or refilled with ink. If ink gets on your clothes or belongings, it may not come off.

Additional items may be included depending on the location

The initial ink bottles will be partly used to charge the print head. These bottles may print fewer pages compared to subsequent ink bottles

HOW TO USE

1. Select the printer setup method
2. Install Epson Smart Panel. This will help you set up the printer even if you use the printer with a computer. Epson Smart Panel
   You can set up the printer while watching instructions on your smart device. By using the app, you can remotely control the printer on your smart device or perform more diverse printing through the app.

INSTALLATION INSTRUCTIONS

1. Follow these instructions if you selected “No” in section 1 — 2.
   Make sure that the color of the ink tank matches the ink color that you want to fill.

2. Remove the cap while keeping the ink bottle upright; otherwise ink may leak.

3. Use the ink bottles that came with your printer.

4. Epson cannot guarantee the quality or reliability of non-genuine ink. The use of non-genuine ink may cause damage that is not covered by Epson’s warranties.

5. Check the upper line in the ink tank.

6. Insert the ink bottle straight into the port to fill ink to the upper line.

7. When you insert the ink bottle into the filling port for the correct color, ink starts pouring and the flow stops automatically when the ink reaches the upper line.

8. If the ink does not start flowing into the tank, remove the ink bottle and reinsert it. However, do not remove and reinsert the ink bottle when the ink has reached the upper line; as doing so may cause ink to leak or damage the printer when the ink rises above the upper line.

9. Ink may remain in the bottle. The remaining ink can be used later.

10. Do not leave the ink bottle inserted; otherwise the bottle may be damaged or ink may leak.

11. When the ink reaches the upper line of the tank, pull out the bottle

12. Confirm that the tanks are filled with ink, and then hold down the button for 5 seconds to start charging ink. Charging ink takes about 11 minutes

13. Load A4 size plain paper at the center of the paper support with the printable side facing up
    When you load the paper, the light turns on. Ignore this light for now as it only applies when printing with AirPrint or Mopria.

14. Press the button to turn off the printer

15. Print a nozzle check pattern to check if the print head nozzles are clogged.
    While holding down , press .

16. The nozzle check pattern is printed. Check the printed pattern to see if the print head nozzles are clogged.

17. Run the print head cleaning. Print head cleaning uses some ink from all ink tanks
    If there is ink remaining in each bottle, refill the ink tank. See steps 1 to 2 in section 2.

18. Visit the website to install software and configure the network. If your printer comes with a CD, you can also use that (Windows only). When these operations are complete, the printer is ready for use.

ET-2830 Series
https://epson.sn/2830

L3550 Series
https://epson.sn/3550

Guide to Control Panel

Buttons and Functions

Reading the Indication Lights

Checking Ink Levels and Refilling Ink

Check the ink levels. If any of the ink levels are below the lower line, see steps 1 to 2 in section 2 to refill the tank

To confirm the actual ink remaining, visually check the ink levels in all of the printer’s tanks. Prolonged use of the printer when the ink level is below the lower line could damage the printer

Ink Bottle Codes

For Europe

For Australia and New Zealand

522

For Asia

003

Use of genuine Epson ink other than the specified ink could cause damage that is not covered by Epson’s warranties.

Clearing Paper Jam

Close. For safety, the unit is closed in two steps.

The unit must be closed completely before it can be opened again.

Troubleshooting

See the online User’s Guide for detailed information. This provides you with operating, safety, and troubleshooting instructions such as clearing paper jams or adjusting print quality. You can obtain the latest versions of all guides from the following website.

ET-2830 Series
https://epson.sn/2830

L3550 Series

https://epson.sn/3550

Support

For outside Europe
http://support.epson.net/

For Europe
http://www.epson.eu/support

Storing and Transporting

• Be sure to keep the ink bottle upright when tightening the cap. Place the printer and the bottle in a plastic bag separately and keep the printer level as you store and transport it. Otherwise ink may leak.
• If print quality has declined the next time you print, clean and align the print head.

Radio Equipment Information for Users in Europe, UK and Turkey

• Frequency Range 2,400–2,483.5 MHz
• Maximum Radio-Frequency Power Transmitted 20.0 dBm (EIRP)

General Notice

Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

• Adres : 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan
• Tel : 81-266-52-3131
• Web : http://www.epson.com/

The contents of this manual and the specifications of this product are subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>