FeiyuTech SCORP 3 Axis Stabilized Handheld Gimbal for Camera User Guide
- June 9, 2024
- FeiyuTech
Table of Contents
FeiyuTech SCORP 3 Axis Stabilized Handheld Gimbal for Camera
Quick Experience
Step 1: Unlock and lock
Step 2: Camera installation
Step 3: Gimbal balancing
- Ba lance tilt axis
Turn the camera lens forward.
· Let it go, observe the dropping direction of the camera.
· Unlock the safety lock(red).
· Move the camera until it can keep forward, then tighten the safety lock.
Turn the camera lens upwards.
· Let it go, observe the dropping direction of the camera.
· Loosen the lock screw(red).
· Move the camera until it can keep upwards, then tighten the screw.
-
Balance roll axis
· Unlock the safety lock(red).
· Let it go, observe the dropping direction of the camera.
· Loosen the lock screw(red).
· Move the camera until it can stay horizontally, then tighten the screw.
-
Balance pan axis
· Hold the handle and slant it(> 15°), put the vertical arm horizontally.
· Let it go, observe the dropping direction of the camera.
· Loosen the lock screw(red).
· Move the camera until it can stay stably at any angles, then tighten the screw.
Step 4: Power ON/OFF
Check before powering on: Gimbal has enough energy, all the position locks
have been unlocked safety lock, lock screw have been tightened. Camera is
ready to shoot. (The lens cover should be removed from the camera and the
memory card and battery needs to be inserted to the camera to complete all the
connections.)
Long press power button, release the button until it shows LOGO on display.
Overview
- quick release plate for camera
- Tilt axis motor
- Roll axis motor
- Touch screen
- Shutter Button
- Mode button
- Joystick
- Versatile arm
- kickstand
- Handle
- Pan axis motor
- Multifunction knob
- Tilt lock
- Sliding arm lock screw
- Trigger button
- Shutter button
Charging
Please fully charge the battery before power on the gimbal for the first time.
Open the USB rubber cover. Connect the USB 2.0 AM to USB-C MALE cable to
charge. Quick charge is available.
Download the Feiyu ON App
Scan the QR code to download the app, or search for “Feiyu ON” in the App Store or Google Play.
- Requires iOS 9.0 or above, Android 6.0 or above.
iOS
Version
|
Android Version
---|---
Official Social Media
Facebook
| 
YouTube| 
Instagram|
Twitter
---|---|---|---
Guilin Feiyu Technology Incorporated Company
For more in formation, please visit our official websitewww.feiyu-
tech.com
E-mail:support@feiyu-tech.com Tel: +86 773
2320865
Due to software and hardware improvement s, your actual product might differ from the description ns and pictures in this user manual. You can get the !attest user manual from the official website.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
The device must not be co-located or operating in conjunction with any other antenna or transmitter.
Notice: When charging, other functions cannot be used
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>