Monoprice 107231 6.35-mm Mono Jack to 6.35-mm Mono Jack Adaptor-User Manual

June 4, 2024
Monoprice

Monoprice 107231 6.35-mm Mono Jack to 6.35-mm Mono Jack Adaptor

**

Monoprice-107231-6.35-mm-Mono-Jack-to-6.35-mm-Mono-Jack-Adaptor-
product**

Specification

  • Connector Type
    Mono Jack

  • Connector Gender
    Male

  • Item Dimensions LxWxH
    3.6 x 1 x 0.8 inches

  • Item Weight
    0.353 ounces

  • Department
    Audio, Video Adapters

Introduction

Mono Jack to Mono Jack, 6. 35mm (1/4 inch) Gold-plated Mono Jack Adaptor The actual item may differ from the picture or specifications. It was produced in China.

What’s in the Box

  • Mono Jack
  • Jack Adapter
  • User Manual

About This Item

Products with electrical plugs are made with American consumers in mind. Because outlets and voltage vary from country to country, this device might need an adapter or converter to be used where you are traveling. Before buying, kindly verify compatibility.

  • gives you a quick way to send video and audio to your TV.
  • spends extravagantly on technology that shields against unanticipated concussions
  • Decked with additional tension points to prevent connector splitting

Frequently Asked Question

How can I tell if my jack is 2.5 mm or 3.5 mm?

The size of the two connections is the most obvious distinction between them. Although the 3.5 mm connector is roughly 50% larger than the 2.5 mm jack, they are otherwise comparable. Additionally, you’ll see that the smaller 2.5 mm connection occasionally contains an extra ring.

What purpose does a jack adapter serve?

You may connect 3.5 mm audio plug devices to your Lightning devices using this converter.

Why was the 3.5 mm jack taken out?

Removing the 3.5mm connector allows phone manufacturers more freedom in terms of form factors and internal component placement. It also makes it simpler for them to make their handsets waterproof and rugged. But perhaps most crucially, it improves music quality when used with the correct headphones.

What is the name of a 2.5 mm jack?

The 2.5mm plug is a scaled-down variant of the 3.5mm connector and is occasionally referred to as “sub-miniature” or “sub-mini.” Both operate in the same way. The 2.5mm plug can output both mono and stereo audio and is available in TRS and TRRS versions.

What is the name of the 3.5 mm jack?

Common names for the 3.5 mm versions include mini-phone, mini-stereo, mini- jack, etc. The names “jack plug” and “jack socket,” which refer to the male and female phone connectors, respectively, are widely used in the UK. A stationary (more fixed) electrical connector is referred to as a jack in the US.

How is an iPhone jack adapter used?

You may connect 3.5 mm headphones and other audio devices to a USB-C port using the USB-C to 3.5 mm Headphone Jack Adapter. Your device’s USB-C port should accept the USB-C to 3.5 mm Headphone Jack Adapter. Connect the other end to your headphones.

Why is the headphone jack being removed by everyone?

Why manufacturers actually stopped using the headphone jack
Although the headphone jack is contentious, removing it would have consequences beyond making users buy new headphones. Customers are being forced to purchase your new headphones as a result.

Why do phones no longer have a headphone jack?

The size disparity The size of the connector and the plug that goes with it determines the difference between 2.5mm, 3.5mm, and 6.35mm headphone jacks, which is the most noticeable distinction.

How does a 3.5 mm audio jack appear?

a little round connector that can take the pin-shaped plug from a typical set of headphones for listening to music. For phone headsets, older phones used a smaller 2.5mm jack.

Are 3.5 mm and headphone jacks the same thing?

The three most widely used headphone jack sizes are 3.5mm, 2.5mm, and 6.35mm. There are numerous other sizes available as well. The most common size for headphones and earbuds is 3.5mm, whereas in-ear headphones frequently utilise 2.5mm, a smaller size. The largest dimension, 6.35mm, is commonly used for balanced audio in audio equipment.

An universal audio jack is what?

The connecting of microphone and stereo audio signals between an audio peripheral that uses a four-contact plug and an audio device that contains a four-contact jack is made possible by a universal four-contact plug and jack assembly.

Why won’t my iPhone’s aux function?

Inspect the charging port on your device for debris or damage. Ensure that the charging cable is placed correctly into the port. Upgrade your gadget. Verify that your audio is running the most recent firmware available from the vehicle’s manufacturer.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Monoprice User Manuals

Related Manuals