ZALMAN 122319 S5 ATX MID Tower Computer Case User Manual
- June 4, 2024
- ZALMAN
Table of Contents
122319 S5 ATX MID Tower Computer Case
**User Manual
Ver. 122319
**
122319 S5 ATX MID Tower Computer Case
- To ensure safe and easy installation, please read the following precaution.
- Product design and specifications may be revised to improve quality and performance without notice.
Precautions
- Read this manual carefully before installing.
- Check the product and components before installing.
- If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
- Wear gloves to prevent accidents when installing the product. Severe damage may occur when mounting the system, so do not apply excessive force.
- Connecting the cable incorrectly may cause a fire due to a short circuit.
- Make sure to refer to the manual when connecting the cable.
- Be careful not to block the ventilation hole of the product when using the system.
- Avoid locations with direct sunlight, water, moisture, oil, and excessive dust. Store and use the product in a well-ventilated location.
- Do not wipe the surface of the product using chemicals. (organic solvents such as alcohol or acetone) Do not insert your hand or another object into the product during operation, as this may injure your hand or damage the object. Store and use the product out of children’s reach.
- Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
- The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.
Specifications
Model | 55 |
---|---|
Case Form Factor | ATX Mid-Tower |
Dimensions | 395.5(D) x 212(W) x 465(H)mm |
Weight | 5.8kg |
Case Materials | Steel, Plastic, Tempered Glass |
Motherboard Support | ATX / mATX / Mini-FIX |
Maximum VGA Length | 340mm |
Maximum CPU Cooler Height | 160mm |
Maximum PSU Length | 190mm |
PCI Expansion Slots | 7 |
Drive Bays | 2 x Combo(3.5″ or 2.51, 4 x 2.5″ |
Fan Support | Top |
Front | 3 x 120mm |
Rear | 1 x 120mm |
Bottom | 2 x 120mm |
Pre-Installed Fan(s) | Front |
Rear | 1 x 120mm (with ARGB LED Effect) |
Radiator Support | Top |
Side | 240mm (Cooling Guide) |
I/O Ports | 1 x Headphone, 1 x Mic, 2 x USB 2.0, 1 x USB 3.0, |
Reset Button, Power Button, LED Control Button(Side)
Accessories
I/O Ports
# | Pad | # | Part | # | Pad | # | Part |
---|---|---|---|---|---|---|---|
a | Power Button | b | Reset Button | c | HDD / Power LED | d | Microphone Jack |
e | Headphone Jack | f | USB 2.0 Ports | g | USB 3.0 Pod | h | LED Control Button |
Removing the side panels
2. Removing the front panel
Mounting the motherboard
3-1. Motherboard size
Mounting the PSU
5. Mounting the PCI-E(VGA) card
6. Mounting the 3.5″ and 2.5″ SSD / HDD
7. Mounting the 2.5″ SSD / HDD
Mounting the radiator
Fans Included / Specifications
10. Mounting the fans
11. Mounting the radiator![ZALMAN 122319 S5 ATX MID Tower Computer Case
- fig 15](https://manuals.plus/wp-content/uploads/2022/08/ZALMAN-122319-S5 -ATX-MID-Tower-Computer-Case-fig-15.png)
12. I/O Connectors
Documents / Resources
|
ZALMAN 122319 S5 ATX MID Tower Computer
Case
[pdf] User Manual
122319 S5 ATX MID Tower Computer Case, 122319, S5 ATX MID Tower Computer Case,
Computer Case, Case
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>