ASUS Q20888 ROG Keris Wireless AimPoint Mouse User Guide
- June 9, 2024
- Asus
Table of Contents
ROG KERIS WIRELESS RIMPOINT
WIRELESS OPTICAL GAMING MOUSE P709
User Guide
Package Contents
- We recommend usina the wireless donate extender when usina the mouse in 2.4GHz mode.
** Only use the wireless dongle extender for the wireless dongle.
Specifications*
| Resolution | DPI 1 | DPI 2 | DPI 3 ( Default) | DPI 4 |
|---|---|---|---|---|
| 100 DPI to 36000 DPI | 400 DPI | 800 DPI | 1600 DPI | 3200 DPI |
You may customize the DPI settings for DPI 1-4 through Armoury Crate or the DPI On-The-Scroll tuning function.
Mouse features
1. Left-click button
2. Scroll wheel
3. Right-click button
4. Forward button
5. Backward button
6. Mouse feet
7. USB Type-C® connector / USB Type-C®| 8. DPI button / DPI
9. Pairing button
10. Rubber cover
11. USB dongle / USB
12. Optical sensor
13. Connection mode switch
---|---
Replacing the switches
Profile switching
| Profile | Button Combination | Default lighting effect |
|---|---|---|
| Profile 1 | Color Cycle | |
| Profile 2 | Breathing (purple) | |
| Profile 3 | Static (blue) | |
| Profile 4 | Breathing (green) | |
| Profile 5 | Reactive (yellow) |
Switching between Bluetooth host devices
Press the Pairing button to switch between different host devices your gaming
mouse is already paired to. The LED on your gaming mouse will blink for 1
second depending on the host switched to.
| BLE Host | Lighting effect color |
|---|---|
| Host 1 (default) | Red |
| Host 2 | Purple |
| Host 3 | Blue |
Connecting your gaming mouse
Setting up your gaming mouse as a wired mouse Connect the bundled USB
Type-C® to Type-A cable to your gaming mouse and a USB port on your computer
Setting up your gaming mouse as a RF wireless mouse
- Connect the USB dongle to a USB port on your computer.
- Set the connection switch to the RF 2.4G Wireless mode.
Setting up your gaming mouse as a Bluetooth wireless mouse
Set the connection switch to the Bluetooth mode.
Pairing Bluetooth mode to additional host devices (max. 3)
- Set the connection switch to the Bluetooth mode.
- Press and hold the Pairing button for 3 seconds until the LED on your gaming mouse start to blink blue. Once your gaming mouse has been successfully paired, the LED indicator on your gaming mouse will light up blue for 3 seconds.
Updating the firmware and customization
- Connect your gaming mouse to your computer using the bundled cable, then connect the USB dongle to a USB port.
- Download and install the Armoury Crate software from https://rog.asus.com
- Follow the software instructions to update your gaming mouse and dongle’s firmware.
- Customize your gaming mouse using Armoury Crate.
Using the DPI On-The-Scroll tuning function
The DPI On-The-Scroll tuning function allows you to customize the DPI of your gaming mouse without using Armoury Crate.
- Press and hold the DPI button for 3 seconds until the LED on your gaming mouse light up.
- Scroll the scroll wheel forwards or backwards to adjust the DPI. The LED color hue on your mouse will differ depending on the DPI adjustment.
- Press the DPI button once you have finished customizing the DPI value to save the changes made.
Battery Status
The LED on your gaming mouse will turn red (blinking) when the battery power
is below 20% in Bluetooth or RF 2.4G mode. You may charge your gaming mouse by
using the bundled USB cable.
Safety Guidelines
Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C(32°F) to 40°C(104°F). When the device exceeds the maximum temperature, unplug or switch off the device to let it cool down.
Notices
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other
liability, you are entitled to recover damages from ASUS. In each such
instance, regardless of the basis on which you are entitled to claim damages
from ASUS, ASUS is liable for no more than damages for bodily injury
(including death) and damage to real property and tangible personal property;
or any other actual and direct damages resulted from omission or failure of
performing legal duties under this Warranty Statement, up to the listed
contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims
based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum
for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-
PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS
OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS
SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for
SAR are conducted using standard operating positions accepted by the FCC with
the EUT transmitting at the specified power level in different channels.
The FCC has granted an Equipment Authorization for this device with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this device is on file with the FCC and can be
found under the Display Grant section of
www.fcc.gov/eot/ea/fccid after searching on
FCC ID: EMJMP709 /
MSQMPDONGLE1
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION! The use of shielded cables for connection of the monitor to the
graphics card is required to assure compliance with FCC regulations. Changes
or modifications
to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
Accessories that came with this product have been designed and verified for the use in connection with this product. Never use accessories for other products to prevent the risk of electric shock or fire.
Compliance Statement of Innovation, Science and Economic Development Canada
(ISED)
This device complies with Innovation, Science and Economic Development Canada
licence exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of
the device.
CAN ICES-003(B)/NMB-003(B)
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Innovation,
Science and Economic Development Canada (ISED) radio frequency exposure
limits. The Wireless Device should be used in such a manner such that the
potential for human contact during normal operation is minimized.
This device has been evaluated for and shown compliant with the ISED Specific
Absorption Rate (“SAR”) limits when operated in portable exposure conditions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and
Restriction of Chemicals) regulatory framework, we published the chemical
substances in our
products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions
for you to be able to responsibly recycle our products, batteries, other
components as well as the packaging materials. Please go to
http://csr.asus.com/english/Takeback.htm for detailed recycling information
in different regions.
Proper disposal
**** DO NOT throw the device in municipal waste. This product has been
designed to enable proper reuse of parts and recycling. The symbol of the
crossed out wheeled bin indicates that the product (electrical, electronic
equipment and mercury-containing button cell battery) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the device in fire. DO NOT short circuit the contacts.
DO NOT disassemble the device.
Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
VCCI: Japan Compliance Statement
VCCI Class B Statement
Regional notice for Singapore
Complies with IMDA Standards DB103778
This ASUS product complies with IMDA Standards.
| Ukraine Certification Logo | EAC Certification Logo |
|---|---|
UKCA RF Output table (The Radio Equipment Regulations 2017)
| Function | Frequency | Maximum Output Power (EIRP) |
|---|---|---|
| 2.4GHz wireless | (2402 – 2480MHz) – Mouse | 10 dBm |
| (2402 – 2480MHz) – Dongle | 10 dBm | |
| BLE | (2402 – 2480MHz) – Mouse | 7 dBm |
CE RED RF Output table (Directive 2014/53/EU)
| Function | Frequency | Maximum Output Power (EIRP) |
|---|---|---|
| 2.4GHz wireless | (2402 – 2480MHz) – Mouse | 10 dBm |
| (2402 – 2480MHz) – Dongle | 10 dBm | |
| BLE | (2402 – 2480MHz) – Mouse | 7 dBm |
KC RF Output table
| Function | Frequency | Power |
|---|---|---|
| 2.4GHz wireless | 2402-2480MHz-Mouse | 6.3mW |
| 2402-2480MHz-Dongle | 5mW | |
| BLE | 2402-2480MHz-Mouse | 2.5mW |
Simplified UKCA Declaration of Conformity:
ASUSTek Computer Inc. hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of The Radio
Equipment Regulations
2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is
available at https://www.asus.com/support/.
CE Mark Warning
ASUSTeK Computer Inc. hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of related
Directives.
Full text of EU declaration of conformity is available at:
www.asus.com/support
Service and Support
Visit our multi-language website at https://www.asus.com/support/.
| Manufacturer | ASUSTek COMPUTER INC. |
|---|---|
| Address, City | 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112 |
| Authorized Representative in Europe | ASUS COMPUTER GmbH |
| Address | Harkortstrasse 21-23, 40880 Ratingen |
| Country | Germany |
| Authorized Representative in United Kingdom | ASUSTEK (UK) LIMITED |
| Address | 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M |
6BL, England
Country| United Kingdom
References
- Official Support | ASUS Global
- ASUS Global
- ÐžÑ„Ð¸Ñ†Ð¸Ð°Ð»ÑŒÐ½Ð°Ñ Ñлужба поддержки | ASUS РоÑÑии
- Official Support | ASUS Global
- ASUS в СÐГ
- Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
- ROG - Republic of Gamers｜Global | For Those Who Dare
- Official Support | ASUS Global
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>