AXIS F2115-R Varifocal Sensor Installation Guide

: June 9, 2024
: AXIS

Table of Contents

Installation Guide
Warranty information
Support
Safety information
Safety instructions
Transportation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AXIS F2115-R Varifocal Sensor Installation Guide

Installation Guide

Read this first
Read through this Installation Guide carefully before installing the product. Keep the Installation Guide for future reference.

Legal considerations
Video and audio surveillance can be regulated by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.

Liability
Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.

Intellectual property rights
Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at axis.com/patent and one or more additional patents or pending patent applications in the US and other countries.

Equipment modifications
This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user- serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

Trademark acknowledgements
AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX are registered trademarks of Axis AB in various jurisdictions. All other trademarks are the property of their respective owners.

Regulatory information
This product complies with the applicable CE marking directives and harmonized standards:

Electromagnetic Compatibility (EMC) Directive 2014/30/EU. See Electromagnetic compatibility (EMC) on page 4 .
Low Voltage Directive (LVD) 2014/35/EU. See Safety on page 6 .
Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU and 2015/863, including any amendments, updates or replacements. See .

A copy of the original declaration of conformity may be obtained from Axis Communications AB. See Contact information on

Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfill applicable standards for:

Radio frequency emission when installed according to the instructions and used in its intended environment.
Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment.

USA
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The product shall be properly grounded.

Contact information
Axis Communications Inc.
300 Apollo Drive
Chelmsford, MA 01824
United States of America
Tel: +1 978 614 2000

Europe
This digital equipment fulfills the requirements for RF emission according to the Class A limit of EN 55032. The product shall be properly grounded. Notice! This is a Class A product. In a domestic environment this product may cause RF interference, in which case the user may be required to take adequate measures.

Australia/New Zealand
This digital equipment fulfills the requirements for RF emission according to the Class A limit of AS/NZS CISPR 32. The product shall be properly grounded. Notice! This is a Class A product. In a domestic environment this product may cause RF interference, in which case the user may be required to take adequate measures.

Safety
This product complies with IEC/EN/UL 62368-1, safety of audio/video and IT equipment. When this product has reached the end of its useful life, dispose of it according to local laws and regulations. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. In accordance with local legislation, penalties may be applicable for incorrect disposal of this waste.

Europe
This symbol means that the product shall not be disposed of together with household or commercial waste. Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) is applicable in the European Union member states. To prevent potential harm to human health and the environment, the product must be disposed of in an approved and environmentally safe recycling process. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. Businesses should contact the product supplier for information about how to dispose of this product correctly. This product complies with the requirements of Directive 2011/65/EU and 2015/863 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).

Contact information
Axis Communications AB
Gränden 1
223 69 Lund Sweden
Tel : +46 46 272 18 00
Fax : +46 46 13 61 30
www.axis.com

Warranty information

For information about Axis’ product warranty and thereto related information, go to axis.com/warranty

Support

Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

find answers to resolved problems in the FAQ database, search by product, category, or phrase
report problems to Axis support staff by logging in to your private support area
chat with Axis support staff
visit Axis Support at axis.com/support

Learn more!
Visit Axis learning center axis.com/learning for useful trainings, webinars, tutorials and guides.

Safety information

DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury

WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE
Indicates a situation which, if not avoided, could result in damage to property.

Other message levels

Important
Indicates significant information which is essential for the product to function correctly.

Note
Indicates useful information which helps in getting the most out of the product.

Safety instructions

NOTICE

The Axis product shall be used in compliance with local laws and regulations.
To use the Axis product outdoors, or in similar environments, it shall be installed in an approved outdoor housing.
Store the Axis product in a dry and ventilated environment.
Avoid exposing the Axis product to shocks or heavy pressure.
Do not install the product on unstable poles, brackets, surfaces or walls.
Use only applicable tools when installing the Axis product. Using excessive force with power tools could cause damage to the product.
Do not use chemicals, caustic agents, or aerosol cleaners.
Use a clean cloth dampened with pure water for cleaning.
Use only accessories that comply with the technical specification of your product. These can be provided by Axis or a third party. Axis recommends using Axis power source equipment compatible with your product.
Use only spare parts provided by or recommended by Axis.
Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller for service matters.