Speakers BT058 Karaoke Wireless Bluetooth Speaker User Manual
- June 9, 2024
- Speakers
Table of Contents
Speakers BT058 Karaoke Wireless Bluetooth Speaker
Thanks for using, listen to music, enjoy life！
PRODUCT DESCRIPTION
- Master Volume
- Microphone Volume +
- Laughter
- Reverberation depth adjustment
- ON/OFF
- Play/Pause
- Applause
- COAX Input
- Earphone
- Charging Input
- TF Card
- Mood lighting
- Microphone ON/OFF
- Microphone Volume –
- MODE
- Pizzazz
- Light Mode
- PREV
- NEXT
- Blowkiss
- Instrument Input
- AUX, Live input
- Charging Indication
- U disk
- Indicator Light
- Charging Input
Application method
- Long press the ON/OFF button 1-2 seconds “Power on”
- Turn on the Bluetooth device and search for “BT058”. Every time the Bluetooth Speaker Power on will automatically connect the last device that has not cleared the pairing list before the shutdown, and connect it back Failed to transfer to the paired state.
- Open the Bluetooth device player and start playing music. If you need to disconnect the current Bluetooth device,You can disconnect and repair Ples long prees the Play/Pause button.
- Press the “PREV”or” NEXT “button to select music.
- TF/U disk support breakpoint playback, support MP3, WAV format music playback.
- AUX input can be connected to external signal input, supporting live broadcast by mobile phone.
- Insert the Earphone to listen.
- Long press the ON/OFF botton ,Microphone “Power on”, Bluetooth automatically connect with the Speaker.
- Short press the ON/OFF button change the microphone : KTV, HOST Mode. Short press the Light button change the Mood lighting Mode.
- Short Press the Microphone +/- button change the microphone volume.
- Short press Applause, Pizzazz, Laughter, Blowkiss effects sound.
- Short press the MODE change the coaxial mode, COAX insert line to connect the TV coaxial output .
- Instrument input electronic Instrument or Microphone .
- Volume adjust the master volume, Reverberation adjust the reverberation depth of the microphone.
- The Speaker Battery is low , Please charging in time. The Microphone Battery is low , and the blue light is blinking.
Specification
Speaker
- High unit ： 40mm 4Ω5W *2pcs
- Woofer： 5.25 4Ω15W *1pcs
- Max Power ：25W，Peak Power：50W
- Frequency response ：60-20K Hz ±6dB
- Wireless version ：5.0+EDR
- Bluetooth support ：A2DP、AVRCP、HSP、HFP
- Bluetooth operating frequency ：2.402GHz-2.480GHz
- Bluetooth receiving range ：≥10 Meter
- SNR ：≥85db
- Battery Capaticy ：18650 3.7V 4800mAh
- Input ：DC 5V 2000mA
- Usable time ：6-8 H（@80% volume in light off mode）
- Charge time ：3-4 H
Microphone
- Battery Capaticy ：18650 3.7V 1200mAh
- Input ：DC 5V 1000mA
- Usable time ：48-60 H
- Charge time ：2-3 H
packing list
- SPEAKER 1pcs
- Microphone 2pcs
- specification 1pcs
- coaxial line 1pcs
- Audio line 1pcs
FCC STATMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>