Estella 348EMIX8 Programmable Bowl Lift Countertop Mixer User Manual

Estella 348EMIX8 Programmable Bowl Lift Countertop Mixer

OVERVIEW

• 8 Qt. mixer has 600 Watts of power to allow mixing stiffer dough and larger batches
• Heavy duty 4/5 HP commercial motor
• Professionally designed metal body and counter-top style
• Shafts are mounted in ball bearing and 100% steel gears drive
• Electronic 5-speed control allows for non-stop shifting speed
• Slow start feature allows the addition of raw ingredients without splashing
• Planetary mixing action and digital timer ensures perfect results
•  Simple hand lift is ideal for changing bowl and attachments
• Automatically powers off when overloaded to protect the motor and electrical elements
• Clear safety guard (sold seperately) available as an added precaution
• 6 programmable options allow for consistency on your most popular batches
• Comes with stainless steel flat beater, wire whip and dough hook (included)
• Meat grinder and pasta accessory kit available (sold seperately)

When using this machine, always make sure the following conditions or operations are in effect. Failure to do so may cause accidents.

• Keep hand & clothing away from bowl and attachments when in operation.
• Keep rigid objects away from bowl and attachments when in operation.
• To protect against risk of electrical shock, do not immerse mixer in water or other liquid.
• Use the machine only with the electrical service specifications listed on its nameplate.
• Disconnect the machine from its power source before carrying out any maintenance.
• Do not disable or remove the safety mechanisms included with the machine.
• Do not leave the machine in operation unattended.
• Observe maintenance and safety inspection schedules.
• Maximum bread dough capacity 3.3 lbs. on basis of 60 percent water.
• Mixer will run without a safety guard – as extra precaution a clear safety is available (sold separately).
• Mixer will not run if the bowl lift is not raised and engaged.
• The mixer will run without the bowl if the bowl handle is engaged in the ‘up’ position
  • this makes using the HUB easier. Make sure to be aware of the moving planetary head while no bowl is attached.

SPECIFICATIONS

INSTALLATION INSTALLATION

BEFORE INSTALLING YOUR MIXER, CHECK TO BE SURE THAT YOUR ELECTRICAL SERVICE SPECIFICATIONS MATCH THOSE OF YOUR MIXER AS PRINTED ON THE MIXER’S NAMEPLATE.

LOCATION
Place the mixer in its operating location. Bench should be placed on a sturdy level surface. There should be adequate space around the mixer for the user to operate the control and install and remove bowls.

ELECTRICAL CONNECTIONS
WARNING: THE PROVIDED ELECTRICAL CORD ON THIS MACHINE IS A THREE-PRONG GROUNDING CORD. IT IS IMPERATIVE THAT THE MACHINE IS PLUGGED INTO A PROPERLY GROUNDED OUTLET.

CONTROLS

NOTE: New mixer bowls and agitators (beaters, whip, and doughhook) should be thoroughly washed with hot water and a mild soap solution, rinsed with either a mild soda or vinegar solution, and thoroughly rinsed with clean water BEFORE being used. This cleaning procedure should also be followed for bowls and agitators before whipping egg whites or whole eggs.

SPEED INDICTOR BAR: The speed indicator bar displays which speed (1-5) the mixer
is currently set to. If the mixer senses that there is an uneven load in the mixer bowl, a notification will flash on the display.

DIGITAL DISPLAY: The digital displays are divided into two sections. The left single-digit display is the program display area, which is used to display the current set program number. The right two-digit display is the time display, which is used to show the time in minutes, or in seconds if the timer is less than 1 minute. If the time is shown in minutes, a dot on the timer display will flash to signify that it is still counting. If a program is not selected and the timer is not set, it will count up from 0 and the program display will show 0. If the timer is above 99, the program display will show “-“, indicating a countdown.

If a program is selected the program display area will display the current program number (1-6) and the time display area will display the remaining time that corresponds to the specific program. The timer will always count down based on the program that is selected.

• BUTTONS: The buttons on the control panel are as follows:
• Start/Pause – Begins or pauses the mixer’s motor
• Stop – Stops the mixer’s motor
• Timer Up Arrow – Increases the amount of time on the timer
• Timer Down Arrow – Decreases the amount of time on the timer
• Speed Up Arrow – Increases the speed of the motor
• Speed Down Arrow – Decreases the speed of the motor
• Programs – Used to create or select from preset programs
• Program Selection Numbers (1-6) – Chooses the program that corresponds to the respective program number

OPERATION

POWER ON AND POWER OFF
After powered on, all of the indicators and the digital display will flash on, and the buzzer will sound for 1 second. If the device was normally shut down before powered off last time, it will enter a standby state after 1 second. The digital displays will all display 0, and the indicator will display speed level 1. If the motor was running when last powered off, the state before the unit was powered off will be restored after 1 second, but the motor will change from a running state to a paused state. In case of a shutdown, please stop the motor first and then unplug the power.

START AND STOP THE MIXER
Before starting the mixer, make sure the bowl is attached and the lift is engaged in the “up” position, then press the start/stop button to start the motor. Whether the motor is started or not, you can adjust the speed by pressing the up and down speed button arrows. You can also adjust the timer by pressing the up or down timer arrows on the display.
If the timer is adjusted after the mixer is started, the adjustment time will not be remembered and will only be effective for this operation. If the timer is not set to 0, the countdown will start again immediately.

After the mixer is started, press the Start/Pause button in order to temporarily pause the running of the motor. When the motor is paused, the timer will also stop until the Start button is pressed again, at which time it will start again.
To return to the standby state, press the Stop button when the mixer is running or suspended.

HOW TO RECORD AND SET THE PROGRAM

1. Press the Start/Pause button to start the machine. Once this is pressed, the machine will begin recording your actions.
2. Use the up and down arrows to select your speed preference.
3. If you’d like your speed to change mid-mix, adjust speed at your desired time (for example: changing from speed 1 to speed 2 at 30 seconds, just press the up arrow to the second speed indicator at the 30 second mark).  There is no need to pause or stop the mixer to change speed.
4. If you want the mixer to pause to add ingredients, press the Start/Pause button, and lower the bowl lever (Error E2 will show in the display, disregard as that error just means the bowl is down). This will tell the program to pause itself at the desired time. (For example – if you want the mixer to pause at 60 seconds, press the Start/Pause button, lower the bowl, add ingredients, raise the bowl and press the Start/Pause Button to begin again. This will be a saved function in your program.)
5. When you are finished with the recording, press the Stop button.
6. To save the program, hold the Programs button and the program number button (1-
7. simultaneously (approximately 3 seconds). For example, if you want to save it as program number 3, press the Programs button and the 3 at the same time.
8. The display will show the program number and time duration once it is saved.
9. To choose a saved program, press the corresponding program number and then press the Start/Pause button to begin the program.

Any current program can be reprogrammed by saving over the program number at any time without needing to clear it.

CLEAR THE SAVED PROGRAMS
In order to clear out the saved programs in the mixer, simultaneously hold down the Program and the Stop keys for 5 seconds. The digital display will flash, “–“, and then return to the normal display after 3 seconds. This is a signifier that all saved programs have been cleared from the unit.

COUNTDOWN TIMER AND REMINDER
When the countdown is less than 15 seconds, the alarm will sound to notify the user every 2 seconds until the timer reaches 0. The motor will stop running automatically and the digital display will flash to show “00”. Once the timer reaches zero, the alarm will sound once every 10 seconds for 1 minute.

POWER OFF MEMORY
If the motor loses power during operation, the controller will restore the program and the remaining running time before losing power next time when the motor is powered on, but the motor will change to the suspended state

MIXER SPEEDS:

• Speed 1: Slow Mixing/Beating – For slow beating, mashing and kneading yeast dough.
• Speed 2: Medium Mixing – For mixing cookie and cake batters.
• Speed 3: Medium Beating – For beating , creaming and medium fast whipping.
• Speed 4: Fast Beating – For whipping heavy cream, egg whites and boiled frostings.
• Speed 5: Fast Whipping – For whipping small amounts of heavy cream and egg whites.

INSTALLATION

HOW TO INSTALL A BOWL

The bowl must be installed before the agitator. To install the bowl, fully lower the bowl support. Position the bowl so the alignment bracket on the back of the bowl is in the bowl retainer and the locating pin on the front of the bowl support fits in the holes on the sides of the bowl.

HOW TO INSTALL AN ATTACHMENT
To install an attachment, the bowl must be installed and fully lowered. Place the attachment in the bowl, push it up on the attachment shaft, and turn it clockwise to seat the shaft pin to the slot of the attachment shank. Disconnect the power connection before installing the accessories.

• There are 2, #5 hub grinder plates included. One with 3/16″ hole diameter and the other with 5/16″
• The pasta roller attachment can roll dough into thicknesses between 1/64″ & 3/32″

USING YOUR ESTELLA ATTACHMENTS

MAINTENANCE

NOTE: ALL MAINTENANCE WORK SHOULD BE DONE ONLY AFTER THE UNIT HAS BEEN DISCONNECTED FROM ELECTRICAL POWER AND GROUNDING.

• Never use a metal or stiff brush to clean the mixer. Never clean the mixer with a water hose or any fluid pressure.
• The mixer should be thoroughly cleaned after each use.
• Bowls and agitators should be removed from the mixer and cleaned.
• The transmission case and planetary gears are filled with special lubricant that will last for several years. When lubricant is needed for replacement, it should be ordered from our authorized service representative.
• If the attachment strikes the bowl, stop the mixer.
• If your mixer should malfunction or fail to operate, check the following:
• Is the mixer plugged in?
• Is the fuse in the circuit to the mixer in working order? If you have a circuit breaker box, be sure the circuit is closed.
• If the problem is not due to one of the above items, please contact your original seller.

ACCESSORIES

TROUBLESHOOTING

back of the machine or the circuit board

E8| Overheating, High

electricity, Overworking

| Unplug and wait for about 30 minutes
E9| Motor/Bowl Overload or Blocked, 800g powder| Remove ingredients

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>