Qiaohua Industries SP-N01NL WiFi Light Switch Instruction Manual
- June 9, 2024
- Qiaohua Industries
Table of Contents
Qiaohua Industries
SP-N01NL WiFi Light Switch
Instruction Manual
Packaging List:
- 1x Switch
- 1x Manual
- 1x Accessories set
Wire Connection:
Installation:
This product must be installed in accordance with the installation rules and
preferably by a qualified electrician. Incorrect installation and / or
incorrect use may cause risk of electric shock or fire. Cut the power supply
before any intervention.
Strip around 8mm cables to have a good contact surface.
- Attach the wires according to Wire Connection.
- Install the switch with wall box which is already fixed in the wall.
- Mount the cover face to the switch.
- Switch on the power.
APP Setup:
Download free app Tilvision, available on the iOS App Store or on Android
Google Play.
Create your account following the instructions in the application.
Click ‘+’ to add device and follow the installation wizard in the application.
Warning: In case the Wi-Fi network or password changed, press the pairing
button 5 until LED blink blue and red. Then follow the instruction in the app
to add the device again.
Use:
On the switch :
Turn on / off the light by pressing button.
With the remote control:
Press the ‘ON’ (‘OFF’) button on remote control to turn the light on (of).
With your smartphone, via Tilvision:
Switch On/Off on app from anywhere.
Technical Specification:
Power Input: AC 100V-240V
Wi-Fi coverage: <15M
Max.: 200W
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.