Baseus ioTa Series 420W Portable Power Station User Manual
- June 9, 2024
- Baseus
Table of Contents
ioTa Series 420W Portable Power Station User Manual
ioTa Series 420W Portable Power Station
Thank you for purchasing Baseus ioTa Series Portable Power Station
(hereinafter referred to as Baseus Digital Portable Power Station). The
information contained herein affects your safety and your legal rights and
responsibilities. Read this entire document carefully to ensure proper
configuration before use Failure to read and follow the instructions and
warnings herein may result in serious injury to you or bystanders, or damage
to your device or property. Shenzhen Baseus Technology Co. Ltd. reserves the
right of final explanation for this document and all relevant documents
relating to Baseus Digital Portable Power Station, and the right to make
changes at any time without notice.
By using this product, you hereby signify that you have read this document
carefully and that you understand and agree to abide by the terms and
conditions herein. You agree that you are solely responsible for your own
conduct while using this product, and for any consequences thereof. You agree
to use this product only for purposes that are proper and in accordance with
all terms, precautions, practices, policies and guidelines Shenzhen Baseus
Technology Co. Ltd. (Baseus Digital Portable Power Station) has made and may
make available.
Shenzhen Baseus Technology Co. Ltd. (Baseus Digital Portable Power Station)
accepts no liability for damage, injury or any legal responsibility incurred
directly or indirectly from the use of this product. Users shall observe safe
operation guidelines including, but not limited to, those set forth herein.
Function Description
- This product is developed based on industry-leading digital power technology. It supports PD3.1 140W fast charging, fully charges your device in a snap;
- This product uses a LCD screen to display real-time operation status (battery level, operating temperature, current input/out-put power, remaining charging time), charge and discharge reminder, port status, etc. le It supports 420W of sine wave AC power output so as to supply products with a rated power of lower than 420W, such as car-mounted mini-fridges, car-mounted ice machines, desk lamps, small rice cookers, etc.
- It supports simultaneous power output of up to 8 products, with a maximum of 140W PD fast charging via a single Type-C1 port; it also accommodates multiple protocols for USB/Type-C-based fast power output to meet the charging needs of digital products. ‘ Supports no more than 2 methods of input for charging: Type-C1 PD3.1 fast charging (140W Max.), DC port charging (100W Max.); ” The DC input charging port is compatible with the MPPT protocol, supporting direct power supply via car-mounted chargers and direct charging via solar panels with MC4 interface
- The built-in LED lighting provides three lighting modes: long light, SOS and strobe. You can switch the mode by pressing the button or adjust the brightness of the long light via the app.
Product Specification
Name: Digital Power Bank 420W
Model No.: BPE42B Battery
Capacity: 90000mAh/288Wh Solar
DC input: 12-2W-8A 100W Max. Type-C1
Input: 5V-3A, 9V-3A, 12V-3A, 15V-3A, 20V-5A, 28V-5A 140W Max.
AC Output: 100V-120V-3.82A 60Hz 420W (Pure Sine Wave; Peak Power 840W)
USB1/USB2 Output: 5V-3A, 9V-3A, 10V-2A, 12V-2.5A
Type-C1 Output: 5V-3A, 9V-3A, 12V-3A, 15V-3A, 20V-5A, 28V-5A 140W Max.
Type-C2 Output: 5V-3A, 9V-3A, 12V-2.5A
Type-Cl+Type-C2 Output: 100W+30W
USB1+USB2 Output: 5V-5A
USB1+Type-C1 Output: 30W+100W
USB2+Type-C2 Output: 5V-5A
Type-C14-(Type-C2+USB1+USB2)Output: 100W+25W
DC+Car Charger Output: 13.5V-7.4A 100W Max.
Total Output: 420W Product Size: 260 X 170 X 118mm
Weight: About 3.7kg
Execution Standard: Q/BASEUS 047 List of
Accessories: Solar Charger Cable (MC4 to DC Input), Superior Series Fast
Charging Data Cable Type-C to Type-C (240W),
User Guide, Warranty Card
Package Including
Baseus ioTa Series Portable Power Station 420W(US/JP 110V) X1 Solar Charger Cable (MC4 to DC Input} x 1 Superior Series Fast Charging Data Cable Type-C to Type-C (240W)x 1 User ManualX 1 Warranty Card x 1
Schematic Display of Product
Download the Baseus App and User Manual
- Scan the QR code on the right for the download address with your mobile device, or https://us.baseus.com/download (in other languages) in the search bar to download the app.
‘ Please follow the guide in the app to register (if you have registered, please login directly), login, add equipment, and then connect and operate.
https://bds-api-cn.baseus.com/app/official/download
Instructions
Note: The following instructions assume that the APP has been connected to the product. If the connection is broken or the distance between them is too far (over 10 meters), the APP may not be able to instantly respond or issue reminders or alerts timely, affecting user experience. It is recommended to use the product while keeping the APP on and keep them close for smoother use
- Start/shutdown * Press the power button for 2s to turn on the product, the power indicator lights up, screen prompts to enter standby mode ‘ In the power-on state, press and hold the power button for 2 seconds to turn it off with the power indicator off.
The default standby time of this product is 15 minutes. if the inverter switch/LED light switch is off and the product has no load accessed, the product will automatically tum off in 15 minutes. - How to charge a device
- Charge a device via a USB/Type-C/DC port After the product is turned on,
the USB/Type-C/DC port will enter the standby mode and can be used to charge
cell phones or other digital products with compatible data cables.
▪ Meanwhile, the main screen will display all parameters for reference, including the current total output power, current temperature, remaining battery level, and remaining discharge time under the current output power.
2) Charge a device via the AC port
• After the product is turned on, press and hold the AC output button for 2 seconds to enable AC inversion output, with the AC output indicator on. Now you can plug in and charge an AC device.
• Under the AC output state, press and hold the AC output button for 2 seconds to disable AC inversion output, with theAC output indicator off.
Warning: There is a high voltage output after the AC inversion output is enabled. Please do not plug metal or L” conductive objects into the AC main socket to avoid electric shock.
- How to charge the product This product supports up to 140W PD fast charging, and accommodates all adapters and car-mounted chargers that are compatible with the PD protocol.
DC charging • The DC port supports the MPPT protocol, and can be charged with car-mounted chargers or solar panels. ‘ When the product starts charging, it will enter the power-on state automatically in order to monitor all modules and provide feedback on operation status in real time.
Note: * The product will not enter automatic shutdown when it is charged with a device through USB/Type-C/DC/AC ports. The value of each parameter on the main screen is measured by a built-in program, which may be subject to errors and changes in real time. The parameter information is for reference only.
- Please check the charging and discharging chart of the ports in the APP for more details about the charging and discharging of the ports.
4. LED Lighting ‘ This productcomes with a LED floodlight for emergency lighting needs;
• Press and hold the LED switch/mode switch button for 2 seconds to tum on the LED right The fight has a default state of staying on for long or it can be switched by pressing applicable buttons to two other modes which are SOS and strobe.
• Please adjust the brightness under the long-on mode in the app.
• Under the LED lighting state, press and hold the LED switch/mode switch button for 2 seconds to tum it off.
Note: If the LED lighting is on, the default standby time of this product will be adjusted to 8 hours for any need of emergency lighting at night.
Advanced use of the APP
@You can contact Baseus for lon 1 customer service via the app to solve problems you may have. ®The device name can be edited in the app.
FAQ
1 What type of battery is used in the product?
– This product uses high quality automotive-grade lithium iron phosphate
battery. what equipment can be charged via the AC output port of the product?
The AC output of the product is rated at 420W with a peak power of 840W, being
able to supply power to most consumer electronics.
– However, please check the rated power of your equipment and make sure that
the total power of all load equipment is lower than the rated power before
using it.
2 How do I know how long the product can supply power?
– The LCD display will show the remaining battery life and calculate a
remaining discharge time based on the current power, for reference only.
3 How can I tell the product is charging?
– When charging, the LCD display will show the remaining charging time and
input power.
4 Does the product support simultaneous charging and discharging?
– The Type-C port and USB port support simultaneous charging and discharging
when using the DC port to charge the product, it does not support output
charging.
5 How to clean this product?
– Please use a dry, soft and clean cloth or paper towel to wipe this product.
6 Can I carry this product on the plane?
– Equipment no larger than 160WH is allowed on planes. This product is 288Wh,
so it is not allowed on planes.
7 How do I store and maintain the product?
– It is recommended to use or store the product with a temperature of
20-30°C, and keep it away from water, heat source and metal objects.
– For long-term storage, please charge and discharge the product once every 3
months (discharge it to 30% and then charge it to 60%).
‘ For safety reasons, do not store this product when the temperature is higher
than 45°C or lower than -10°C for a long time.
– If the power of this product is less than 1% after use, please charge it to
80% before storing it. If left idle for a longtime in low or full battery, its
battery core will suffer irreversible damage and the service life of the
product will shorten.
– If the product has low remaining power and has been idle for too long (not
in over-discharged state), it will enter deep sleep mode and need to be
charged before being used again.
Common Problems & Troubleshooting
| Details of Error icons | Error Type | Recovery Methods |
|---|---|---|
| Icon flashes | USB overload protection | Remove the abnormal load and normal |
operation will resume automatically once the load is normal.
Icon flashes| Type-C overload protection| Remove the abnormal load and normal
operation will resume automatically once the load is normal.
Icon flashes| Type-C high-temperature protection| Normal operation will resume
automatically after the product cools down.
Icon flashes| Battery charging high temperature protection| Normal operation
will resume automatically after you stop the charging and place It in a cool
and ventilated place.
Icon flashes| Battery discharge high temperature protection| Normal operation
will resume automatically after the battery cools down.
Icon flashes| Battery charging low temperature protection| Normal operation
will resume automatically after the battery temperature is restored to above
5°C (41°F).
Icon flashes| Charging overload protection|
Normal operation will resume automatically after being restarted.
Icon flashes| AC output overload protection| Normal operation will resume
after removing the over-powered device and restarting the product Electrical
appliances must be used within the rated power.
Icon flashes| AC over-temperature protection| Please remove the abnormal load,
and put the product in a cool and ventilated place, and it will resume normal
automatically.
Icon flashes| AC discharge low-temperature protection| Normal operation will
resume automatically after the ambient temperature is restored.
Icon flashes| Fan blocking| Please check whether the fan is blocked by foreign
objects and remove them if so.
Icon flashes| DC overload protection| Normal operation will resume
automatically once the load is normal.
Icon flashes| DC high temperature protection| Normal operation will resume
automatically after the product cools down.
Icon flashes| Battery discharge low temperature protection| Normal operation
will resume automatically after the battery temperature is restored to above
5°C (41°F).
Icon flashes| Battery discharge undervoltage protection| Please charge the
product immediately.
Icon flashes| Failure of communication with BMS| Normal operation will resume
automatically after being restarted.
If any alert occurs during the use of this product and the alert icon does not
disappear after the product is restarted, please stop using the product
immediately (do not attempt to charge or discharge). If the above information
fails to resolve your problem, please contact customer service for further
support.
Statement on Toxic and Hazardous Substances in Electronic Information
Products
| Part | Toxic or hazardous substances and elements 0 |
|---|---|
| Description | Lead (Pb) |
| Pdytocenintted Vials | PotAnoinxed dlphenyl ethers ME) |
| PCB | x |
| Plastic | 0 |
| Metal | X |
| Accessory | 0 |
This form is prepared in accordance with SJ/T 11364 regulations. 0: Indicates
that contents of the toxic and hazardous substances in all homogeneous
materials are below the limit requirements specified by GB/T 26572 standard.
X: Indicates that contents of the toxic and hazardous substances exceed the
limit requirements specified by GB/T 26572 standard in at least one
homogeneous material of the component. This product complies with EU RoHS 2.0
Directive(2011/65/EU) The 5-year icon refers to the “effective life of
environmental protection” , not the product quality assurance period.
Electronic products all contain toxic and harmful substances such as lead,
mercury and cadmium. Once they are overused, toxic and harmful substances may
leak or mutate, cause pollution to the environment, or cause serious damage to
people and property. The term or environmental protection use'” means that all
electronic products will be required to use within this effective period. We
will no longer be responsible for the quality of the products due to the
safety risks that arise after the safe use period.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Warning: Operation of this equipment in a residential environment could cause radio interference.
FCC ID:2A482-BPE428
Warning Please follow the above safety instwaicos otherwise it may cause
fire, electric shock, damage °rather iniunes.
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2″ Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District,
Shenzhen Executive Standard: Q/BASEUS 047 Hotline: .86-4000-712-711
Website: www.baseus.com
‘Designed by Baseus %lade in China