70mai RC06 Rear Camera User Manual

June 9, 2024
70mai

70mai RC06 Rear Camera

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line. www.alza.co.uk/kontakt 

Importer:

+44 (0)203 514 4411

Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Product Overview

  1. Rear camera
  2. Mount
  3. Rear camera lead wire
  4. Joint (Port A)
  5. Joint (Port B)
  6. Rear signal wire
  7. Mini USB 8pin power port

Note: Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.

Functions

The 70mai rear camera is used as an accessory for 70mai in-car products and needs to be used with a main device. After the rear camera is installed and connected with the main device correctly, when rear camera recording is enabled, the rear camera can record and store the image from the rear of the vehicle.

Usage

  • The 70mai rear camera is powered by the main device. When the main device starts operation, the rear camera will also be turned on automatically. When the main device is turned off or sleeps, the rear camera will also be turned off automatically.
  • The main device powers the rear camera only when the main device receives power from an external power source. The main device cannot power the rear camera if it is not powered by the external power source.
  • The image acquired by the rear camera is stored in the microSD card of the main device automatically. As the storage limit is reached for the microSD card, the earliest front-recorded and read-recorded images will be overwritten by the latest images and deleted it turn cyclically.

Specifications

  • Product Rear camera
  • Model Midrive RC06
  • Resolution 1920×1080
  • Input 5V ⎓ 0.5A

Installation

Installing the electrostatic sticker.
Clean your rear windshield and put the electrostatic sticker on the recommended upper area of the windshield, as shown in the figure below. Make sure you remove air bubbles between the sticker and the glass.

Installing the rear camera.
Peel off the protective film from the adhesive sticker on the base of the mount, and paste the rear camera onto the electrostatic sticker in the dotted area.

Connecting the power supply.
Connect the rear camera with the rear signal wire (connect ports A and B together). As shown in the figure on the left, run the wire along the top of the rear windshield, C-pillar, top of the side windows to the main device. Plug the Mini USB 8pin power port into the main device (the AV/IN port of the main device).

Adjust the dash cam angle.
Turn on the main device and switch to rear camera recording mode. Adjust the camera angle based on the preview screen to ensure that the camera is facing the back of the vehicle.
Note: The installation and wiring methods for different vehicles may differ from what described in the user manual. The installation shall be conducted by a professional installer.

70mai RC06 Rear Camera 2

Precautions

  • Please employ a professional installed for the installation. The company shall not be liable for improper personal operation that causes issues such as short circuit of car power course, damage to the car battery, damage to the interior, and the like.
  • The company shall not be liable for damages due to installation, rather than quality issue of the product itself.
  • The company shall not be liable for failed normal use of this product that is not resulted from quality issue of this product.
  • During installation and use of the product, please do not insert or remove the rear camera while the power is on, otherwise the product may be damaged.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

  • Identification data of the manufacturer’s / importer’s authorized representative:
  • Importer: Alza.cz a.s.
  • Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
  • CIN: 27082440

Subject of the declaration:

  • Title: Rear camera
  • Model / Type: Midrive RC06

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

  • Directive No. 2014/30/EU
  • Directive No. 2011/65/EU as amended 2015/863/EU
  • Prague, 1.10.2022

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

70mai User Manuals

Related Manuals