Harbor Breeze ZDL1138 LED Wall Light Luminaire User Manual
- June 9, 2024
- Harbor Breeze
Table of Contents
Harbor Breeze ZDL1138 LED Wall Light Luminaire
Thank you for purchasing this Harbor Breeze product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead
of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides &
Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
1-888-251-1003, 8 a.m. – 8 p.m.,
EST, Monday – Sunday. You could also contact us at
partsplus@lowes.com or visit
www.lowespartsplus.com.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list. If any part is missing or damaged, do
not attempt to assemble the product.
- Estimated Assembly Time: 10 minutes
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit www.lowes.com for more information
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product
- This product is not a toy and must not be operated by children
- Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.
- Do not submerge in water. The product can be damaged.
- Use with 18AWG minimum, underground low-voltage circuit cord.
WARNING
- Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker
- For use with low-voltage landscape lighting systems only.
- The wire is intended for shallow burial, less than 6 in. deep
- Risk of Electric Shock. Install all luminaires 10 ft. or more from a pool, spa or foundation.
- Keep lamp away from material that may burn.
- Do not touch hot lens, guard or hot fixture housing
- Do not operate or install a fixture with missing or damaged parts.
- Do not touch the LED at any time as this may cause damage to the fixture.
FCC
CAUTION
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
PACKAGE CONTENTS
INSTALLATION OVERVIEW
Dig a hole for fixture (A) according to the dimensions shown. Insert fixture (A) into the hole, securing with the excess dirt or decorative rock/stones (none included).
Insert wire from low-voltage transformer (sold separately) into the wire guide by twisting the wire into each end of the wire guide. Align the pins on the connector top cover so that each pin lines up with opposite sides of the wire. Securely tighten the connector top cover making sure the pins completely pierce the plastic shield of the wire.
TROUBLESHOOTING
PROBLEM
The light does not turn on at night.
POSSIBLE CAUSE
- The transformer is not plugged in or turned on.
- Fixture connector is not properly installed on the low voltage cable.
CORRECTIVE ACTION
- Make sure the transformer is plugged in and turned on.
- Make sure the contact pins pierce the wire insulation and make proper contact with the wire.
CARE AND MAINTENANCE
Clean the lens, lamp head and lamp stand regularly with a non-abrasive
cleaner. Warning: Always make sure the light is unplugged and completely
cool before attempting to clean it.
WARRANTY
This fixture is warranted to be free from defects in materials and workmanship for five (5) years from the date of original purchase. Call to obtain a Return Authorization number and further instructions. The manufacturer will be liable for the replacement of the defective item and will not be liable for any other loss, damage, or injury which is caused by the product