YEELIGHT YLDP004 Smart LED Bulb User Manual
- June 9, 2024
- Yeelight
Table of Contents
YEELIGHT YLDP004 Smart LED Bulb
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7,
www.alza.cz
Specifications
| Model: | YLDP004 |
|---|---|
| Interface: | GU10 |
| Luminous Flux: | 350 lumen |
| Rated Input: | 220-240 V ~ 50/60 Hz 50mA |
| Colour Temperature | 2700K |
| Connectivity: | Wi-Fi IEEE 802.11 b/g/n 2.4G |
| Operating Frequency: | 2412MHz-2472MHz |
| Maximum Output: | 18.18 dBm |
| Life Expectancy: | 15,000 hours |
| Working Temperature: | -10°C – +40°C |
| Working Humidity: | RH 0%-85% |
| Rated Power: | 4.8W |
| Size: | Φ50 x 54mm |
| Model: | YLDP004-A |
| --- | --- |
| Interface: | GU10 |
| Luminous Flux: | 350 lumen |
| Rated Input: | 220-240 V ~ 50/60 Hz 50mA |
| Colour Temperature | 2700K-6500K |
| Connectivity: | Wi-Fi IEEE 802.11 b/g/n 2.4G |
| Operating Frequency: | 2412MHz-2472MHz |
| Maximum Output: | 18.18 dBm |
| Life Expectancy: | 15,000 hours |
| Working Temperature: | -10°C – +40°C |
| Working Humidity: | RH 0%-85% |
| Rated Power: | 4.8W |
| Size: | Φ50 x 61mm |
Installation Steps
Install the bulb
Install the bulb and turn on the power.
Notes:
- Make sure that the power is off when installing, removing, or examining the light bulb.
- Do not use this product in a lamp with a dimmer (e.g., a desk lamp with a round dimmer switch) to avoid damaging the product.
- Do not use this product in a damp environment.
- Do not use the light bulb in a narrow and ill-ventilated lamp shade as it may cause weak signals or heat dissipation issues.
Connect to Yeelight App **
**
This product can be controlled on Yeelight App and be configured to interact
with other Yeelight products.
Download App
Search for “Yeelight” in an App store or scan the QR code on the right to
download and install the app.
Add Device
- Go to the Yeelight App homepage and click “+” in the upper right corner to add your device.
- Proceed with the configuration as instructed on the App.
- Once you’ve added a device successfully, you can find it in the device list.
Note: The operation procedure may differ from what’s described here due
to App updates. Please proceed as instructed on the App.
This product can also be controlled on Mi home, Google Home App, and Amazon
Alexa. You can download and install one of these Apps from an App store, and
configure your device as instructed on the App. After you have finished the
configuration, you can use the App to control the light.
Restore to factory settings
Use the switch to turn the light bulb on and off five times (on for two
seconds and off for two seconds). The light bulb will start to change colour
or brightness alternately and automatically change to white light with full
brightness after five seconds. This indicates that light bulb has been
restored to its factory settings.
Warnings
- Before using this product, please make sure that your voltage is appropriate for this product’s working voltage. Using this product with a voltage other than the one specified may damage the product and cause safety hazards.
- Do not disassemble this product, as the light diodes can cause damage to the eyes.
- The light bulb will heat up when working. Do not use it in a conned holder for an extended period of time. Ensure sufficient ventilation for the light bulb to allow for heat dissipation.
- For indoor use only.
- Disconnect power before installation to prevent risk of electronic shock.
- Use in Dry Locations only.
- For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lamp holders and may impair contact-making and lamp retention.
- Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.
RF exposure information: The Maximum Permissible Exposure (MPE) level is calculated based on a distance of d=20cm between the device and the human body. To maintain compliance with the RF exposure requirement, a separation distance of 20 cm between the device and the human should be maintained.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2
years. If you need repair or other services during the warranty period,
contact the product seller directly, you must provide the original proof of
purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions,
for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
Hereby, Qingdao Yeelink Information Technology Co., Ltd., declares that the radio equipment type YLDP004/YLDP004-A is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.yeelight.com, Follow up to the full link.
WEEE
This product must not be disposed of as normal household waste in accordance
with the EU Directive on Waste Electrical and Electronic Equipment (WEEE –
2012/19 / EU). Instead, it shall be returned to the place of purchase or
handed over to a public collection point for the recyclable waste. By ensuring
this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. Contact
your local authority or the nearest collection point for further details.
Improper disposal of this type of waste may result in fines in accordance with
national regulations.
References
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
- Alza | Alza.co.uk
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz
- alza.de
- alza.hu
- alza.sk
- 易来全案智能照明，服务全球百万家庭
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>