Pixio PXC327 31.5 Inch VA WQHD 165Hz Gaming Monitor User Manual

Pixio PXC327 31.5 Inch VA WQHD 165Hz Gaming Monitor

Before Using the Product

Installation Space

Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product.
Make sure to allow some space. Do not install near heater or any other high temperature product or humidifier.

• Do not place the monitor near heat sources, such as radiators, and do not expose the monitor to direct sunlight for an extended period of time.

• Make sure to keep the original packaging material. If there are any needs to transport the monitor, the packaging material will be the best method for successful delivery.

• Make sure to use a soft, non-abrasive cloth when cleaning the monitor. Do not use corrosive or strong detergents
  to clean the monitor. They may result in permanent damage to the panel and will void the warranty.

• Always check to make sure the power cord is unplugged before cleaning the monitor.

• Be careful when handling liquids while cleaning as it may cause irreparable damage to the electrical components in the monitor.

Cleaning the Product

Take the following steps when cleaning.

1. Power off the product and computer.

2. Disconnect the power cord from the product.
   Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock
   may result.

3. Wipe the monitor with a clean, soft and dry cloth.
   Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
   Do not spray water or detergent directly on the product.

4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.

5. Connect the power cord to the product when cleaning is finished.
   6

6. Power on the product and computer.

Notice.

Characteristics of Crystal Display Monitors

When the following potential issues occur, please be aware that the monitor is functioning in accordance of manufacturing tolerances and does not mean the monitor has a defect.

• When first turning on the monitor, the screen may flicker. Please turn the monitor off and turn it back on.
• The brightness levels on different images may appear uneven.
• The effective pixel count should approximate 99.99%, but there may be a possible 0.01 % or less failure rate due to dead or stuck pixels.
• If the monitor displays a single static image for a long period of time, there may be an image burn that can be seen while viewing a different image. The burned image will gradually disappear and turning off the monitor for an extended period of time will speed up the process.
• If you notice extended, constant flickering or if the screen constantly goes to black, please contact Pixio directly and we will assess and have the unit repaired if necessary. Please do not attempt to repair the unit yourself as it will result in voiding the warranty.

Preparation

Product Includes:

• Monitor
  

• Stand
  

• M4x16mm Screws

• DP Cable
  

• Power Adapter

Product Assembly

1. Assemble the base to the stand with sets of M4 x 16mm screws as pictured.
   Caution: Please do not put the monitor directly on a flat surface or press down on the monitor.
   There is a risk of damaging the monitor.

To remove the whole base, do as above:

1. Push the Slider on the back cover.
2. Lift the base.

**3** Take it out in the arrow pointed direction.

Dimension & Weight

Net Weight: 6.2kg (13.67Ib)

Monitor Inputs

1. DC
2. USB Firmware Update
3.  HDMI HDMI 2.0, 144Hz, FreeSync Premium, HDR
4. DP2 DisplayPort 1.2, 165Hz, FreeSync Premium, HDR
5. DP1 DisplayPort 1.2, 165Hz, FreeSync Premium, HDR
6. Earphone

WARNING: Always use the appropriate power cord.

Control Panel

Menu Short Cut

Main OSD Navigation

How to Reconfigure

BACK
Right| Move right on the OSD Menu / Enter

ENTER
Press| Turn ON / OFF the OSD Menu

To turn ON/OFF the OSD Menu, Press Jog Button.
To turn ON/OFF the Monitor, Press Jog Button for more than 2 seconds.

OSD Menu.

Display

• Brightness: Adjust the display brightness value from 0 to 100.
• Contrast: Adjust the display contrast value from 0 to 100.
• Black Equalizer: Adjust the Black Equalizer value from 0 to 100.
• Preset: Select Preset from Standard, User, Movie, Photo, RTS, FPS1, and FPS2.
• Aspect Ratio: Select Aspect Ratio from Full, 16:9, and 4:3.  [disabled when turn on the FreeSync]
• Sharpness: Adjust the Sharpness value from 0 to 100.

Color

• Color Temperature: Select Color Temperature from Warm, Normal, Cool, sRGB, and User.
• Gamma; Select Gamma from Off, 1.8, 2.0, 2.2, and 2.4.
• Hue: Adjust the Hu~ value from 0 to 100,
• Saturation: Adjust the Saturation value from 0 to 100.
• Low Blue Light: Adjust the Low Blue Light value from 0 to 100.

Gaming Setup

• FreeSync Premium: Turn AMD FreeSync Premium On or Off.
• Overdrive: Select Overdrive from Off, Low, Middle, and High.
• Game Assist: Select Game Assist from Timer, Crosshair(LoS), and FPS Counter.

Timer: Select Timer from Off, 15:00, 30:00, 45:00, 60:00 and 90:00
Crosshair(LoS): Select Crosshair type.

FPS Counter: Turn FPS Counter On or Off.

• HDR: Turn HDR On or Off.
• DCR: Turn DCR On or Off.
• MPRT: Turn MPRT On or Off.

Input

• Switch the signal input to Auto Select, DP1 (1.2), DP2(1.2), HDMI (2.0).

System Setup

• Language: Change the OSD menu display language

• OSD Setup: Select OSD Setup from H Position, V Position, OSD Timeout, Transparency.
  H Position: Adjust 0-100
  V Position: Adjust 0-100
  OSD Timeout: Adjust 15-60
  Transparency: Adjust 0-100

• Audio: Select Audio from Volume or Mute.
  Mute: turn On or Off
  Volume: Adjust 0-100

• Reset: Select Reset from Cancel or Confirm.

• Firmware Update: Firmware Update from Cancel or Confirm.

User Data

• User Data: Load/Save Brightness, Contrast, Black Equalizer, Saturation, Preset, Color Temperature, Gamma Overdrive, Volume, Mute, Low blue light settings on the monitor.

Adaptive-Sync. {AMD FreeSync or Nvidia G-Sync.)

FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. This feature will eliminate screen tearing and lag during game play. Improve your gaming experience. The displayed FreeSync menu items on the monitor may vary, depending on the monitor model and compatibility with the
AMD graphics card.
Nvidia G-Sync
If you are using Nvidia GTX 1 Oseries or RTX20series graphic cards, you can use Adaptive-Sync (FreeSync) function. This requires Nvidia’s latest GPU updates.
Please download and latest update if you are intend to use Adaptive-Sync (FreeSync) over your Nvidia GTX graphics cards.
FYI, How to enable FreeSync on Nvidia GPU

1. Right-click on the Windows desktop and select Nvidia Control Panel
2. Expand the Display section of the left-hand navigation pane and select Set up G-Sync
3. Check the “Enable G-Sync, G-Sync Compatible” box and select the Active Sync display you’d like to use if you have more than one monitor
4. Check the “Enable settings for the selected display model” box
5. Click “Apply” in the bottom-right
   If the above isn’t available, or isn’t working, you may need to go to Manage 3D Settings, click the Global tab, scroll down to Monitor Technology, select G-SYNC Compatible in the drop-down, and then click Apply
   Even though AMD Radeon GPUs and some FreeSync monitors support Adaptive Sync over HDMI, Nvidia says you’ll need to connect your GeForce GPU to your FreeSync monitor using a DisplayPort cable to activate variable refresh rates.(G-Sync monitors only work over DisplayPort as well.) Update:

If you have any questions or comments, please contact us below.
cs@pixiogaming.com
support@pixiogaming.jp
www.pixiogaming.jp/support
For your warranty information, please visit www.pixiogaming.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>