AXIS Q1656 DLE Radar Video Fusion Camera Installation Guide
- June 9, 2024
- AXIS
Table of Contents
AXIS Q1656 DLE Radar Video Fusion Camera
Read this first
Read through this installation guide carefully before you install the product.
Keep the installation guide for future reference.
Legal considerations
Video, audio, and radar surveillance can be regulated by laws that vary from
country to country. Check the laws in your local region before using this
product for surveillance purposes.
Liability
Every care has been taken in the preparation of this document. Please inform
your local Axis office of any inaccuracies or omissions. Axis Communications
AB cannot be held responsible for any technical or typographical errors and
reserves the right to make changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty of any kind with regard to
the material contained within this document, including, but not limited to,
the implied warranties of merchantability and fitness for a particular
purpose. Axis Communications AB shall not be liable nor responsible for
incidental or consequential damages in connection with the furnishing,
performance or use of this material. This product is only to be used for its
intended purpose.
Intellectual property rights
Axis AB has intellectual property rights relating to technology embodied in
the product described in this document. In particular, and without limitation,
these intellectual property rights may include one or more of the patents
listed at axis.com/patent and one or more additional patents or pending patent
applications in the US and other countries. This product contains licensed
third-party software. See the third-party license information in the product’s
user interface for more information. This product contains source code
copyright Apple Computer, Inc., under the terms of Apple Public Source License
2.0 (see opensource.apple.com/apsl). The
source code is available from
developer.apple.com/bonjour/.
Equipment modifications
This equipment must be installed and used in strict accordance with the
instructions given in the user documentation. This equipment contains no user-
serviceable components. Unauthorized equipment changes or modifications will
invalidate all applicable regulatory certifications and approvals.
Trademark acknowledgements
AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX are registered trademarks of Axis
AB in various jurisdictions. All other trademarks are the property of their
respective owners. Apple, Apache, Bonjour, Ethernet, Internet Explorer, Linux,
Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX, Windows, and WWW are
registered trademarks of the respective holders. Java and all Java-based
trademarks and logos are trademarks or registered trademarks of Oracle and/or
its affiliates. The UPnP Word Mark and UPnP Logo are trademarks of Open
Connectivity Foundation, Inc. in the United States or other countries.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD,
microSDHC, microSDXC are trademarks or registered trademarks of SD-3C, LLC in
the United States, other countries or both
Regulatory information Europe
This product complies with the applicable CE marking directives
- Radio Equipment Directive (RED) 2014/53/EU. See Radio transmission on page 3 .
- Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU and 2015/863, including any amendments, updates or replacements. See . A copy of the original declaration of conformity may be obtained from Axis Communications AB. See Contact information on page 5 .
Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfill applicable standards
for:
- Radio frequency emission when installed according to the instructions and used in its intended environment.
- Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment.
USA
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested using a shielded network cable (STP) and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.The product shall be connected using a shielded network cable (STP) that is properly grounded.
Contact information
Axis Communications Inc. 300 Apollo Drive Chelmsford, MA 01824 United States
of America Tel: +1 978 614 2000
Canada
This digital apparatus complies with CAN ICES-3 (Class A). The product shall
be connected using a shielded network cable (STP) that is properly grounded.
Cet appareil numérique est conforme à la norme CAN NMB-3 (classe A). Le
produit
USA
This product complies with FCC radiation exposure limits for an uncontrolled
environment. This equipment shall be installed and operated with a minimum
distance of 20 cm (7.9 in) between the user and the device.
Warranty information
For information about Axis’ product warranty and thereto related information, go to axis.com/warranty.
Support
Should you require any technical assistance, please contact your Axis
reseller. If your questions cannot be answered immediately, your reseller will
forward your queries through the appropriate channels to ensure a rapid
response. If you are connected to the Internet, you can:
- download user documentation and software updates
- find answers to resolved problems in the FAQ database, search by product, category, or phrase
- report problems to Axis support staff by logging in to your private support area
- chat with Axis support staff
- visit Axis Support at axis.com/support
Learn more!
Visit Axis learning center axis.com/learning for useful trainings, webinars,
tutorials and guides.
Safety information
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death
or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in minor
or moderate injury.
NOTICE
Indicates a situation which, if not avoided, could result in damage to
property.
Other message levels
Important Indicates significant information which is essential for the product
to function correctly.
Note
Indicates useful information which helps in getting the most out of the
product.
Safety instructions
NOTICE
- The Axis product shall be used in compliance with local laws and regulations.
- Store the Axis product in a dry and ventilated environment.
- Avoid exposing the Axis product to shocks or heavy pressure.
- Avoid exposing the Axis product to vibration.
- Do not install the product on unstable poles, brackets, surfaces or walls.
- Do not install the product on vibrating poles, brackets, surfaces or walls.
- Use only applicable tools when installing the Axis product. Using excessive force with power tools could cause damage to the product.
- Use a clean cloth dampened with pure water for cleaning.
- Use only accessories that comply with the technical specification of your product. These can be provided by Axis or a third party. Axis recommends using Axis power source equipment compatible with your product.
- Use only spare parts provided by or recommended by Axis.
- Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller for service matters.
- The power supply shall be plugged in to a socket outlet installed near the product and shall be easily accessible.
- Use a limited power source (LPS) with a rated output power limited to ≤100 W and a rated output current limited to ≤5 A.
- Use a yellow/green colored grounding cable of at least 0.5 mm2 or 20 AWG.
Transportation
NOTICE
- When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product.
Battery
CAUTION
Do not replace the battery yourself. Contact Axis support if the log message
requests a battery change. Lithium coin cell 3.0 V batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME), CAS no. 110-71-4.
WHAT IN THE BOX
INSTALLATION
References
- Axis Communications - Leader in network cameras and other IP networking solutions | Axis Communications
- Learning | Axis Communications
- Patent statement | Axis Communications
- Welcome to Axis support | Axis Communications
- License - APSL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>