KRUPS GX550850 Precision Grinder Flat Burr Coffee User Manual

June 9, 2024
KRUPS

KRUPS-logo

KRUPS GX550850 Precision Grinder Flat Burr Coffee

KRUPS-GX550850-Precision-Grinder-Flat-Burr-Coffee-
Product

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed:

  1. Read all instructions before using the burr grinder.
  2. To protect against fire, electric shock, and injury to persons, do not immerse cords, plugs, or machines in water or other liquid.
  3. Close supervision is necessary when any appliance is used by or near children.
  4. Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning. To unplug, grasp the plug and pull it from the electrical outlet. Never pull the cord.
  5. Avoid contact with moving parts.
  6. To reduce the risk of severe injury to persons or damage to the appliance, keep hands and utensils out of the bean hopper while grinding, and when the appliance is plugged in.
  7. Do not operate the grinder with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. In this case, return the appliance to the KRUPS-approved Service Center for examination, repair, or electrical or mechanical adjustment.
  8. The use of attachments not recommended or sold by KRUPS may cause fire, electric shock or injuries.
  9. Do not use outdoors.
  10. Do not let the cord hang over the edge of the table or counter or touch hot surfaces, including the stove.
  11. Check the hopper for the presence of foreign objects before using it.
  12. Always operate the burr grinder with the lid securely in place.
  13. Do not place on or near a hot gas or electric burner or in a heated oven.
  14. Do not operate the appliance when empty.
  15. This product has been designed for domestic use only. Any professional use, inappropriate use, or failure to comply with the instructions will void the manufacturer’s Warranty.
  16. Do not use appliances for other than intended use.
    SAVE THESE INSTRUCTIONS

CAUTION
This appliance is for household use only. Any servicing other than cleaning and user maintenance should be performed by the nearest authorized KRUPS Service Center.

  • Do not immerse the appliance in water.
  • To reduce the risk of fire or electric shock, do not dismantle the appliance. Repair should be done by an authorized KRUPS Service Center only.

SHORT CORD INSTRUCTIONS

Regarding your Cord Set:

  • A. A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.

  • B. Extension cords should be used with caution.

  • C. If an extension cord is used, (1) the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, (2) if the appliance is of the grounded type, the extension cord should be of a grounded type and (3) the longer cord should be arranged so that it will not
    drape over the countertop or tabletop where it can be pulled on by children
    or tripped over.

  • D. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
    KRUPS-GX550850-Precision-Grinder-Flat-Burr-Coffee-
fig-3

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other), to reduce the risk of electrical shock. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
Thank you for choosing an appliance from KRUPS.

DESCRIPTION

KRUPS-GX550850-Precision-Grinder-Flat-Burr-Coffee-
fig-1

  1. Coffee bean hopper
  2. Coffee bean hopper lid
  3. Body
  4. ON/OFF switch
  5. Removable upper burr
  6. Ground coffee holder
  7. Ground coffee holder lid
  8. Number of cups selector
  9. Ground coffee fineness selector
  10. Ground coffee dispenser
  11. Cleaning brush

TECHNICAL CHARACTERISTICS

KRUPS-GX550850-Precision-Grinder-Flat-Burr-Coffee-
fig-4

ABOUT GRINDING COFFEE

The proper grind gives the most flavorful cup of coffee. The grind depends on the method by which the coffee is to be brewed. Generally, the finer the grind the more quickly the coffee should be prepared. That is why coffee ground for use in an espresso machine is much finer than coffee to be brewed in a drip system. Coffee that is ground too fine for a particular brewing process – (fine espresso grind used in an automatic drip coffee machine) will result in over-extraction and bitter, pungent-tasting coffee. Conversely, coffee that is too coarse for a particular brew method will result in under-extraction and weak, watery coffee. If the correct grind is used, adding more coffee simply makes a brew stronger without making it bitter. In addition to providing a number of grind settings, coffee grinders provide a consistent grind. This is important to ensure the extraction is consistent across all of the ground coffee particles.

BEFORE FIRST USE

Before using the coffee grinder, wipe the housing and bean hopper with a clean damp cloth. Wash the ground coffee holder and the ground coffee holder lid in hot soapy water, then rinse and dry.

OPERATING THE COFFEE GRINDER

  1. Make certain the coffee grinder is unplugged. Fit the ground coffee holder (6) and its lid (7) in their correct positions. Check that the assembly is correctly positioned in the body (3).

  2. Open the lid of the coffee bean hopper (2) and fill the bean hopper (1) to the level desired. Do not fill above the “max.” level. Close the lid.
    NOTE: This product is designed to grind whole-bean coffee only.

  3. Set the quantity of ground coffee by positioning the number of cups selector (8) according to the desired quantity.

  4. Set the ground coffee fineness level by adjusting the ground coffee fineness selector (9) to the desired level. (see § Practical Hints )

  5. Insert the plug into an electrical socket (voltage: 120 volts ~ 60 Hz).

  6. Press the ON/OFF switch (4) to start the appliance.

  7. Once the selected quantity has been ground, the appliance will stop automatically.

  8. If you want to stop the appliance before grinding is complete, press the ON/OFF switch (4).

  9. Remove the ground coffee holder, tap the receptacle gently, remove the lid, and pour the ground coffee into the filter of the coffee maker or use a measuring spoon.

  10. To obtain additional ground coffee, repeat the operating cycle. Always first make sure that the ground coffee does not go above the “max.” level of the ground coffee holder (6).
    Selected settings will be retained from one use to the next.

IMPORTANT!

For your appliance to run correctly, make certain that:

  • The lid to the coffee-bean hopper (2) is correctly closed.
  • The ground coffee holder (6) and its lid (7) are correctly placed in the body of the appliance.
  • This appliance is equipped with an overheating protective device. If the appliance overheats, it will switch off automatically. In this case leave it to cool for 30 minutes. Then restart by pressing the ON/OFF switch.

PRACTICAL HINTS

  • It is best to store coffee beans in a dry, cool place. Beans should be kept in an opaque, airtight container.

  • Grind the coffee just prior to brewing it. Advice to select the level of fineness for your ground coffee.

  • Use the fineness selector (9) to adjust the grind according to the type of coffee maker.
    KRUPS-GX550850-Precision-Grinder-Flat-Burr-Coffee-
fig-5

  • Generally, the quicker the water goes through the ground coffee, the finer the ground coffee should be. A “medium” ground is thus suited to making filter coffee while a “very fine” ground is needed to make an Espresso.

  • For the first use, we suggest that you use an intermediate position and then adjust the setting to your taste. Once you have used the appliance a few times, you will find the ideal grind setting to suit your taste and brew method.

  • Do not change the grind setting while the appliance is running.

  • Do not store the coffee bean or powder in the coffee holder or dispenser over 24 hours.
    KRUPS-GX550850-Precision-Grinder-Flat-Burr-Coffee-
fig-6

Advice to select the number of cups

  • Use the number of cups selector (8) to program the quantity of ground coffee you want.
  • The more cups you select, the longer the appliance will run.
  • The mill grinds 1/4 oz. of coffee per cup selected.

MAINTENANCE

  • To keep all your coffee’s aroma and to avoid degradation of the ground coffee, empty the ground coffee holder after each use.
  • Always disconnect the grinder before cleaning.
  • Never place the grinder, power supply cord or plug in water or under running water.
  • Do not use strong detergents or abrasive pads to clean the appliance.
  • Clean the lids and the ground coffee holder in warm, soapy water.
  • To remove the upper burr (5), set the fineness selector (9) to the fine position then take hold of the winglets of the upper mill with your fingers and turn clockwise, then raise it vertically to remove. (Fig. A)
  • Clean the upper burr with the cleaning brush (11). (Fig. B)
  • Carefully clean the inside of the coffee-bean hopper (1) with a damp cloth.
  • To replace the upper burr, set the fineness selector (9) to the coarse position, insert the burr and turn it once in the counter-clockwise direction. (Fig. A)
  • Carefully clean the ground coffee dispenser (10) and the body of the appliance with a damp cloth.

TROUBLESHOOTING GUIDE

KRUPS-GX550850-Precision-Grinder-Flat-Burr-Coffee-
fig-7

KRUPS INTERNATIONAL LIMITED GUARANTEE

This product is repairable by KRUPS during and after the warranty period. KRUPS endeavors to keep most of the stock of spare parts available for the repair of your product for up to 5 to 7 years on average, from the last date of production. Accessories, consumables, and end-user replaceable parts can be purchased, if locally available, as described on the KRUPS internet site www.krups.com

The Guarantee

This product is guaranteed by KRUPS (company address and details included in the country list of the KRUPS International Guarantee) against any manufacturing defect in materials or workmanship for a period of 2 years starting from the initial date of purchase. The international manufacturer’s guarantee by KRUPS is an extra benefit that does not affect consumers’ Statutory Rights. The international manufacturer’s guarantee covers all costs related to restoring the proven defective product so that it conforms to its original specifications, through the repair or replacement of any defective part and the necessary labor. At KRUPS’s choice, a replacement product may be provided instead of repairing a defective product. KRUPS’s sole obligation and your exclusive resolution under this guarantee are limited to such repair or replacement.

Conditions & Exclusions

The international KRUPS guarantee only applies within the guarantee period and for those countries listed in the country list attached and is valid only on the presentation of a proof of purchase. The product can be taken directly in person to an authorized service center or must be adequately packaged and returned, by recorded delivery (or an equivalent method of postage), to a KRUPS authorized service center. Full address details for each country’s authorized service centers are listed on the KRUPS website (www.krups.com) or by calling the appropriate telephone number as set out in the country list to request the appropriate postal address. KRUPS shall not be obliged to repair or replace any product which is not accompanied by a valid proof of purchase. This guarantee will not cover any damage which occurs as a result of misuse, negligence, failure to follow KRUPS instructions, use of current or voltage other than as stamped on the product, or a modification or unauthorized repair of the product. It also does not cover normal wear and tear, maintenance or replacement of consumable parts, or the following :

  • using the wrong type of water or consumable
  • ingress of water, dust or insects into the product
  • scaling (any de-scaling must be carried out according to the instructions for use)
  • mechanical damages, overloading
  • damages or poor results due to wrong voltage or frequency
  • accidents including fire, flood, thunderbolt, etc
  • professional or commercial use
  • damage to any glass or porcelain ware in the product

This guarantee does not apply to any product that has been tampered with, or to damages incurred through improper use and care, faulty packaging by the owner, or mishandling by any carrier.
In order to offer the best possible after-sales service and constantly improve customer satisfaction, KRUPS may send a satisfaction survey to all customers who have had their product repaired or exchanged in a KRUPS-authorised service center. The international KRUPS guarantee applies only for products purchased in any of the countries listed and used for domestic purposes only in an of the countries listed on the country list. Where a product purchased in a listed country and then used in another listed country :

  • The international KRUPS guarantee does not apply in case of non-conformity of the purchased product with local standards, such as voltage, frequency, power plugs, or other local technical specifications.
  • The repair process for products purchased outside the country of use may require a longer time if the product is not locally sold by KRUPS.
  • In cases where the product is not repairable in the new country, the international KRUPS guarantee is limited to a replacement by a similar product or an alternative product at a similar cost, where possible.

Consumer Statutory Rights

This international KRUPS guarantee does not affect the statutory rights a consumer may have or those rights that cannot be excluded or limited, nor rights against the retailer from which the consumer purchased the product. This guarantee gives a consumer specific legal rights, and the consumer may also have other legal rights which vary from State to State or Country to Country. The consumer may assert any such rights at his sole discretion.

FAQs

Why does the grinder stop working?****

The grinder will stop working if the hopper is empty.

Why does the grinding sound change?****

When the beans are ground finer, the grinder will produce a higher pitch sound.

What happens if I grind too much coffee?****

The grinder will automatically shut off when it reaches its maximum capacity.

How do I clean the grinder?****

Unplug the machine before cleaning and do not immerse any parts in water or other liquids. Wipe with a damp cloth. Do not use abrasive cleaners or scouring pads.

How important is a burr grinder?****

The quality of your coffee will considerably increase if you use a burr grinder. Burr grinders produce fewer particles than blade grinders because they apply pressure to the beans rather than cutting them first. Yet, there are two distinct burr varieties to choose from: flat and conical.

How long does a burr coffee grinder last?****

A set of steel burrs should work well for 500 pounds of coffee grinding, specifically. Ceramic furniture should cost around 750 pounds. Let’s assume that, on average, you consume one pound of beans every week. Your burrs should survive for about ten years at that rate!

How does a flat burr grinder work?****

Two rings of burrs in flat burr grinders are positioned horizontally on the floor. One looks up, while the other looks down. Coffee beans are ground between the burrs, drop between the burrs, and then drop once more. The coffee is shaped in this way with two 90-degree twists.

Does burr grinder taste better?****

The majority of coffee drinkers will agree that a burr grinder offers much better grind size and flavour. Burr mills are well known for their consistency, quality, and general uniformity despite being more expensive than a blade grinder.

Can you wash burr grinder?****

Cleaning should be done when the hopper is empty because the majority of burr grinders have a sizable hopper to hold coffee beans. Remove the hopper and wash it by hand in a sink filled with hot, soapy water, along with the lid and any removable sealing gaskets. Rinse thoroughly in hot water, then pat dry with a microfiber towel.

Should you wash burr grinder?****

If you use a blade grinder every day, you can clean it once a week. Burr grinders can be cleaned once a month. It will be much simpler to deep clean the grinder if you wipe it down with a cloth after each usage.

Video

Download PDF Link;KRUPS Precision Grinder Flat Burr Coffee pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals