KRUPS XP442 Pump espresso Virtuoso User Manual

KRUPS XP442 Pump espresso Virtuoso

Over view

DESCRIPTION

•  Removable water tank B Cup holder tray
•  On/Off button
•  Control panel
• Filter holder head
•  Filter holder
•  Filter 1 cup
•  Filter 2 cups
•  Filter for coffee pods
•  Steam nozzle
•  Foam nozzle
•  Drip tray grill
•  Drip tray
•  Power cord
•  Spoon-tamper
•  Knob
•  Position O: preheat
•  Hot water and steam preparation M 1 cup Espresso button
•  cups Espresso button
•  Steam button

TECHNICAL SPECIFICATIONS

•  Pump: 15 bar
•  Accessories: 3 cup filters (1cup, 2cups, and soft pod), measuring spoon/tamper
•  Steam function
•  Removable tank (1 L capacity)
•  Power: 1400W
•  Voltage: 220 – 240 V
•  Safety devices against overheating
•  Dimensions: 280 x143 x 285 mm
•  Automatic shut down after 30 minutes

IMPORTANT
Operating voltage: this appliance is designed to operate at 230 V alternating current only. Type of use: this appliance is designed for DOMESTIC USE ONLY

HELPFUL TIPS

Use of freshly roasted coffee is recommended. Contact your coffee roaster for advice. The freshness of the coffee only lasts several weeks after roasting. Good packaging can improve and prolong the flavour of the coffee. If you are unsure of the quality of the packaging, choose a recently roasted coffee.
The type of coffee you choose will determine the strength and taste of your espresso. Always use espresso ground coffee. Do not use instant coffee, cafetiere coffee or filter coffee.
The coffee should always be ground just before being prepared.

What coffee should you choose?

• For an aromatic coffee Choose pure Arabica coffees or those composed mostly of Arabica coffee.
• Artisan roasted coffees are preferred as they lend a better complexity and delicateness to the flavour. For a variety of flavours, try pure origin coffees.
•  For an intense coffee Choose coffees blended with Robusta – not specifically 100% Arabica – or Italian-roasted coffees or specific Italian-flavoured coffees.
•  Keep the ground coffee in the fridge as this will lock in the flavour for longer.
•  Do not fill your filter holder to the brim or over fill it; use the measuring spoon (1 spoon for a 30ml espresso, 2 spoons for 2 x 30ml espressos). Clean off any excess coffee from around the filter holder.
•  If you have not used the appliance for more than 5 days, empty and rinse the water tank.
•  Always make sure the appliance is switched off before removing the tank to fill it or empty it.
•  Always ensure the appliance is positioned on a flat, stable, heat resistant surface away from water splashes and sources of heat.

FIRST USE OR IF THE MACHINE HAS NOT BEEN USED FOR A LONG PERIOD

IMPORTANT
Do not place heating elements on the appliance.

IMPORTANT
The safety instructions are part of the appliance. Please read them carefully before using your new appliance.

RINSING THE SYSTEMS BEFORE FIRST USE
To ensure your first cup of coffee tastes great, we strongly recommend that you rinse the espresso machine with hot water, as instructed below:

1.  Remove the water tank (A) (1) and fill it (2). The water level should not exceed the “MAX” mark on the tank and should contain at least 300 ml (= equivalent to 2 large cups). Then place it back on the machine, ensuring that the cover is closed (3).
2. Connect the appliance to a mains socket (4).
3. Make sure the knob (L) is set to the preheat position (L1) .
4. Press On button (C) (5) on control panel (D). On button light switches on, and espresso buttons lights flash white (6). The machine is pre-heating.
5. Place a filter (F2) (7) without coffee into the filter holder. Slot the filter holder into place and turn it to the right until it stops (8).
6. Place two cups under the filter holder.
7. When the temperature reaches pre-set value, espresso buttons white light will stay on. Press 2 espresso button (9), button flashes white. The machine starts to pour the water (10). When it is finished, espresso buttons white light stay on.
8. Press steam button (11). Espresso buttons white light off, steam button orange light stay on, the machine is pre-heating.
9.  Place the steam nozzle (G1) into a container filled with water (12).
10.  Turn the knob (L) from preheat (L1) to steam position (L2) (13), steam button white light flashes, the machine starts to make steam. Let the water heat for 20 seconds, then turn the knob back to preheat position (L1) (14).

MAKING ESPRESSO

IMPORTANT
If the espresso function is used for the first time, the appliance must be cleaned as described in the “FIRST USE” paragraph.

IMPORTANT
To prevent splashes of hot water, check that the filter holder has been tightened until it stops before preparing the coffee. Do not remove the filter holder while the water is flowing, as the appliance is still under pressure.

With ground coffee
The type of coffee you choose will determine the strength and taste of your espresso: the finer your ground coffee, the more intense your espresso will be.

1.  Fill the water tank with drinking water (2) and refit it on the appliance, making sure that it is correctly in place (3).

2.  Connect the appliance to a mains socket (4).

3. Turn on the machine by pressing On button (C) (5), On button light switches on, and espresso buttons lights flash white (6). The machine is pre-heating. When the temperature reaches pre-set value, espresso buttons white light will stay on.

4.  Add the ground coffee to the 1 cup or 2 cups filter (F1, F2) using the measuring spoon (K, 1 spoon = 1 measure = 1 espresso) (15, 16), then pack it down (firmly but not too solid) using the tamper (17), turning it using a circular motion. Once packed, the coffee measure should not exceed the MAX level. Do not overfill the filter. Clean off any excess coffee from around the filter holder (18).

5. Slot the filter holder into place then turn it to the right until it stops (19).

6. Place a cup or two cups under the filter holder.
   Press 1 espresso button or 2 espresso button (20), according to the number of cups you want to make (15). The selected button will flash and the appliance will start (21). When the machine has finished, the selected button will stay lit.

7. Unlock the filter holder by turning it to the left (22) and remove it from the appliance. Do not touch the filter as it will be hot. Empty the filter. Remove the filter from the filter holder.

8. Wash the filter and filter holder under running water to remove the rest of the coffee (23).

With Soft Pods
The machine is compatible with soft pods (generally 60mm in diameter). (F3). Note: For larger coffee pods, we recommend using the 1 cup filter. For espresso pods, use the pod filter.

1.  Insert the filter for coffee pods into the filter holder.
2. Place the pod as centrally as possible in the filter holder. Follow the instructions on the packaging of the coffee pods for correct placement of the pod in the filter holder. Soft pods are designed to make one cup of coffee. Using two pods on top of each other is not recommended In order to start the brewing process, prepare the appliance by carrying out steps 1–3 under “With ground coffee” and press the or button.

PERSONALIZATION OF THE COFFEE VOLUME

You can personalize the coffee volume as you wish from 15 to 65 ml for 1 cup, and from 30 to 130 ml for 2 cups.
Note :
Default volume is 40 ml – 1 cup / 80 ml – 2 cups

1.  The machine is in standby mode.
2. Press for 3 seconds. Selected espresso button orange light flashes.
3. Release the button and start set coffee volume.
4. Press the button as soon as the desired volume is reached.
5. Both espresso buttons orange lights flash 3 times to confirm the new setting.
6. The machine goes back to the standby mode.
   Note :
   Programmable quantity for espresso 1 cup (15-65 ml, default volume 40 ml), 2 cups (30-130 ml, default volume 80 ml).

RECOVER DEFAULT COFFEE VOLUME

1.  The machine is in steam pre-heat status.
2. Press for 3 seconds. 2 espresso buttons orange light flashes once.
3. Water pump works once.
4. Default coffee volume is now recovered.
5. The machine goes back to steam pre-heat status.

STEAM FUNCTION

Making Cappuccino

1. Make espresso as described above using big enough cups.

2. press steam button (11). Espresso buttons light stay on, the machine is pre-heating. white light off, steam button orange

3.  Fill a container with approximately 60 to 100 ml of cold milk
   Note:
   For the best results, use a narrow and relatively small container that can be slipped under the steam nozzle.

4. When choosing the size of the milk container, keep in mind that the milk volume will increase by two to three times.

5. In order to obtain good quality milk froth, we recommend that you use fresh, cold milk. Pasteurised or UHT milk usually gives the best results.
   Note:
   For a better result, turn on the steam nozzle a few seconds in a container before using it in the milk. It will remove the water it may contain

   • flashes, the machine starts to make steam.
     Note :
     For best results, foam the milk near the bottom of the container for approximately 10 seconds, taking care not to touch the bottom. Then slowly tilt the container and move the nozzle upwards until it is almost at the surface of the milk. Make sure that the nozzle does not leave the milk. To get a great foam, move the container in circular motions (26) Once you have achieved the best foam turn the knob back to preheat position (27).

   • If you wish to make more than one cappuccino, first make all the espressos, then make the milk froth.

   • After turning off the steam, quickly and carefully clean the steam nozzle using a damp sponge (to ensure that residues do not remain stuck).

   • Place a container containing water under the steam nozzle and repeat the milk foaming procedure exactly, in order to clean the nozzle. Also – see section “Cleaning the steam nozzle

IMPORTANT!
Warning! To prevent the milk from splashing, do not lift the nozzle out of the milk when using “steam” mode.

IMPORTANT!
Warning! The steam nozzle is still hot! Take care not to burn yourself!

IMPORTANT!
After switching off the steam function, clean the nozzle immediately and carefully, as set out in the section: CLEANING AND MAINTENANCE.

Hot water preparation

1.  The machine is in standby mode.
2. Place a container under the steam nozzle.
3. turn the knob to the position (L2) (25). Espresso buttons white lights turn off, steam button white light flash. Machine starts making hot water and it will stop when turn the knob back to the position pre-heating (L1) (27).
4.  Espresso buttons white lights stay on, steam button white light off. GOOD TO KNOW – PRACTICE AFTER USING STEAM
   •  If you want to make an espresso after using the steam function, you need to cool down your coffee machine to avoid burnt coffee.
   •  Press steam button , if espresso buttons orange light flash, it means the temperature in boiler is too high, please do not make coffee right now. You need to lower temperature.
   •  Immerse the steam nozzle in a container filled with 60 ml of water.
   •  Turn the knob from preheat (L1) back to steam position (L2) (25) to make hot water. Stop making hot water until temperature goes down to pre-set value, then turn the knob from steam to preheat position. Espresso buttons white light stay on.

CLEANING AND MAINTENANCE

Unplug (J) before each clean let the appliance cool down first.

• Machine : Clean the outside of the appliance with a damp sponge when you think it necessary. Do not use detergent or abrasive products. Do not use solvents or abrasive detergents to clean the coffee machine.
•  Water tank : Rinse the inside of the tank regularly. When a fine white layer appears in the tank, descale the appliance (refer to the section on descaling).
•  Drip tray : Clean the drip tray (I) and its grid (H) using water and a little mild detergent (30-31). Rinse and dry.
•  Filter holder, filters : Using a damp cloth, clean the filter holder mount regularly in order to remove possible coffee residues stuck to the surface. In order to prolong the useful life of the watertight seal on the brewing head, do not put the filter holder back in place if the coffee machine is not to be used for extended periods. To remove any deposits that could block the flow of your 1 or 2 cup filter, you may use the needle.
•  Steam nozzle : To prevent milk from drying inside the nozzle, please clean it after each use. To do this, follow the steps for foaming the milk, replacing 100 ml of milk with 60 ml of water. After turning off the steam, quickly and
• carefully clean the steam nozzle using a damp sponge (in order to remove any residue). Pull the tube of the steam nozzle downwards. Carefully clean the steam nozzle with lukewarm water (28) (29). Fit the tube back onto the steam nozzle.

IMPORTANT
Do not clean any parts of this appliance in a dishwasher.

DESCALING

The machine can be descaled at any time, even if the descaling light is not on. However, the coffee machine auto counts the use cycles and gives the alert when the machine must be descaled : when the 1 cup espresso button white light and orange light flash in turn and the 2 cups espresso button white light is lit, the machine needs to be descaled.

1.  Prepare the descaler in accordance with the manufacturer’s instructions, add to the water tank and fill with approx. 750 ml drinking water (2). Place the tank in the machine (3).
2.  Place a receptacle with a capacity of at least 1 litre underneath the spouts.
3.  Insert the filter holder without filter.
4. Press 1 cup and 2 cup espresso buttons at the same time for 3 seconds to go to auto descaling program. white light and white light flash in turn. Release the buttons, machine will go to descaling status automatically. The water pump will work for 10 seconds and then stop for 120 seconds. This cycle will repeat until the water tank is empty.
5.  Once descaling finishes, 2 espresso buttons white light will stay lit.
6. Pour drinking water in the tank and rinse the whole water flowing system (without using coffee, repeat making coffee steps, making hot water and steaming).

IMPORTANT
After descaling, rinse 2-3 times using clean water (no coffee), as described in the “FIRST USE” paragraph. Do not forget to rinse the nozzle. The appliance is now descaled and ready for use again.No repairs on the coffee machine will be covered by the guarantee in case of:

•  no descaling carried out,
•  limescale build-up,
•  accessories cleaned in a dishwasher.

GUARANTEE

This appliance carries a manufacturer’s 2 year guarantee. This appliance has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply. Any repairs that have to be carried out due to a build-up of limescale shall not be covered by the guarantee. For any after-sales problem or for spare parts, please contact an approved service centre.

TROUBLESHOOTING

PROBLEMS

| ****

POSSIBLE CAUSES

| ****

SOLUTIONS

---|---|---
The coffee is very weak.| You have not used enough coffee.| Add more coffee.
The espresso flows too slowly.| The coffee is too fine, too coarse or too mealy.| Choose slightly larger coffee grounds.
The filter holder is dirty.| Clean your filter holder using the instructions in the section: CLEANING AND MAINTENANCE
The head of the filter holder is clogged.| When the appliance has cooled, clean the grill through which the water flows using a damp sponge.
Your machine has a scale build up.| Descale the machine (refer to the section : DESCALING)
There is too much coffee.| Observe the maximum limits when filling the filter.
A continuous flow of water pours from the filter holder after making an espresso.| Your machine is becoming clogged with scale because the water is particularly hard.| Descale the machine (refer to the section : DESCALING)
Coffee grounds are present in the cup.| The filter holder is clogged.| Clean the filter holder using hot water.
The coffee grounds are too fine.| Use slightly larger coffee grounds.
The seal on the head of the filter holder is clogged.| Clean the filter holder and the seal with a damp sponge.
PROBLEMS| POSSIBLE CAUSES| SOLUTIONS
---|---|---
There is no crema on the Espresso| The coffee grounds are too old.| Use freshly ground coffee.
The ground coffee is not suitable for making espresso.| Use finer grounds.
There is too little coffee in the filter holder.| Add more coffee.
The water tank leaks when it is moved.| The valve at the bottom of the tank is dirty or defective.| Wash the water tank and operate the valve with your finger, which is beneath the tank.
The valve is blocked by the scale deposits.| Descale the machine (refer to the section : DESCALING)
Water leak beneath the appliance.| There is an internal leak.| Check that the tank is positioned correctly. If the problem persists, do not use the appliance and consult an approved service centre.
The pump is abnormally noisy.| No water in the tank.| Fill the water tank and restart the pump (refer to the section: FIRST USE). Avoid emptying the tank completely.
The espresso leaks out the sides of the filter holder.| The filter holder is not positioned correctly.| Fit the filter holder in position and lock it (turn from left to right until it stops).
Remove any excess coffee that prevents you from fully locking the filter holder.
The edge of the filter holder is clogged by the coffee.| Remove the excess coffee and clean the grill through which the

water flows using a damp sponge.

Your espresso tastes bad.| After descaling, the rinsing cycle was not carried out correctly.| Rinse the appliance in line with the user

instructions and check the quality of the coffee.

the paragraph on CLEANING AND MAINTENANCE for

cleaning your filter holder.

The appliance does not work.| The pump is disabled due to a lack of water.| Fill the water tank and restart the pump (refer to the section: FIRST USE). Avoid emptying the tank completely.
The removable water tank is incorrectly positioned.| Position the water tank correctly.
The appliance is not connected.| Ensure that the appliance is switched on.
The nozzle does not work or produces little foam.| The foam nozzle is not correctly installed.| Check that the accessory is correctly mounted on the appliance: remove then re-install it on the hinged arm using a firm upward movement.
The milk is not fresh or too warm.| Use fresh, cold pasteurised or UHT milk that has been recently opened.
The steam nozzle has an excess of limescale.| Descale the steam nozzle according to the paragraph on DESCALING.
The shape of the container is not suitable.| Follow the milk foaming instructions (paragraph on STEAM FUNCTION)
1 cup espresso button white light and orange light flash in turn and 2 cups espresso button white light is lit| The machine needs to be descaled.| Descale the machine (refer to the section : DESCALING)
On button white light is lit, 2 espresso buttons and steam button orange light flash at the same time.| Boiler temperature is too high or too low, or temperature sensor is broken.| Turn off the machine for a while, then turn on again. If the problem persists, consult an approved service centre.
On button white light stays on, 2 espresso buttons orange light flash in turn.| Water shortage in water tank or water path is not smooth or the flow- meter is broken.| Pour water in water tank. If the problem persists, consult an approved service centre.
PROBLEMS| POSSIBLE CAUSES| SOLUTIONS
---|---|---
On button white light stays| Machine is warming up| Put the knob back to
on, steam button orange| or steam pre-heating but| pre-heat position
light flashes.| the knob is not in pre-heat|
| position.|
| Continue making hot water| Turn the knob back to
| over 60 seconds| pre-heat position.
| | Machine can make hot
| | water again.
| Continue making steam over| Turn the knob back to
| 60 seconds| pre-heat position.
| | Machine can make steam
| | again.

ELECTRICAL OR ELECTRONIC PRODUCT END OF LIFE

We participate in the protection of the environment! Your product contains a number of materials that can be reused recycled. Take it to a collection point or an approved service centre so that it can be dealt with appropriately.

SAFETY PRECAUTIONS BOOKLET

• Please read the instructions for use carefully before using your appliance for the first time and retain them for future reference: KRUPS cannot accept any liability for non compliant appliance use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
•  Do not use the appliance if the power cord or plug is damaged. The power cord must be replaced by the manufacturer, its after-sales service or similarly qualified persons in order to avoid danger.
•  Your appliance is intended for domestic use inside the home only at an altitude below 2000 m.
•  Do not immerse the appliance, power cord or plug in water or any other liquid.
•  Your appliance is designed for domestic use only.
•  It is not intended to be used in the following applications, and the guarantee will not apply for:
  •  Staff kitchen areas in shops, offices and other working environments;
  •  Farm houses;
  •  By clients in hotels, motels and other residential type environments;
  •  Bed and breakfast type environments.
  •  Always follow the cleaning instructions to clean your appliance:
  •  Unplug the appliance.
  •  Do not clean the appliance while hot.
  •  Clean with a damp cloth or sponge.
  •  Never immerse the appliance in water or put it under running water.
•  WARNING: Risks of injuries if you do not use this appliance correctly.
•  WARNING: During and after use, do not touch hot surfaces (percolation head, filter holder and steam nozzle), subjected to residual heat.
•  Take care when the steam spout is used as steam can cause burns.
•  Make sure the filter holder is tightly fitted before running the coffee through.
•  Coffee maker side (Combi pump espresso models) WARNING: After using, do not touch the keep warm plate, subjected to residual heat.
•  Do not touch the glass jug until it has cooled down, only lift by the handle when it is hot.
• This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely and are fully aware of the dangers involved. Cleaning and user
• maintenance shall not be made by children unless they are older than 8 and they are supervised by an adult.
•  Keep the appliance and its cord out of reach of children under 8 years of age.
•  This appliance may be used by persons with reduced physical, sensory or mental capabilities, or whose experience or knowledge is not sufficient, provided they are supervised or have received instruction to use the device safely and understand the dangers.
•  Children should not use the appliance as a toy.
•  Only use an earthed socket to plug the machine in. Check that the power voltage indicated on the nameplate of the appliance corresponds to that of your mains installation.
•  Do not use the appliance if it is not working properly or if it has been damaged. If this occurs, contact an authorised service centre.
•  Any error in the electrical connection will negate your guarantee.
•  Do not remove the filter holder containing the ground coffee while the water is going through, because the appliance is under pressure at that time.
•  Do not use the appliance if the drip tray and the grid are not in place.
•  Unplug the appliance when you have finished using it and when you clean it.
•  Remove the plug if a problem occurs during operation or before you clean the appliance.
•  Do not pull on the cord to unplug the appliance.
•  The power cord must never be close to or in contact with the hot parts of your appliance, near a source of heat or over a sharp edge.
•  Ensure that the cord and your hands do not touch the hot parts of the appliance (cup warming plate, filter holder, steam nozzle).
•  This appliance shall not be placed in a cabinet or directly under cupboards when in use.
•  Refer to the instructions for descaling your appliance.
•  All interventions other than cleaning and everyday maintenance by the customer must be performed by an authorised service centre.
•  The accessories and the removable parts of the appliance are not dishwasher safe.
•  For your safety, only use the manufacturer’s accessories and spare parts designed for your appliance.
•  This appliance is not suitable for making drinks for babies under the age of 2 years.
•  All appliances are subject to strict quality control procedures. These include actual usage tests on randomly selected appliances, which would explain any traces of use.
•  Take care when the steam spout is used as steam can cause burns.
•  To reduce the risk of injury, do not leave the cord hanging over the table or counter, where it can be pulled on by a child or trip someone.
•  Do not leave the appliance unattended and remain vigilant:
  •  whilst in operation
  •  whilst plugged in and switched on
• Never pour cold water in the tank immediately after a brew cycle. Let the appliance cool down between preparations. Do not place on or near a hot gas or electric burner, or any other source of heat.
•  Do not use appliance for other than intended use.
•  Never operate the appliance with wet hands.
•  Do not place any hot parts on the appliance.
•  Always use on a flat, stable, heat-resistant surface, away from any water splashes and sources of heat.

References

• krups.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>