Button Manager Application for DT Research Systems User Guide
- June 9, 2024
- DT Research
Table of Contents
Button Manager Application for DT Research Systems
User Guide
Button Manager Application for DT Research Systems
Button Manager for DT Research Systems
Operation Guide
Introduction
The Button Manager is the User Interface to manage the physical buttons on DT
Research computing system products. Most of the systems have physical buttons
that allow users to quickly access certain functions, like Barcode Scanner
trigger, OnScreen keyboard, Windows Key trigger, adjust system volume/screen
brightness, and launch user-defined applications. Pre-defined buttons are set
up for most common uses.
Access to Button Manager from Windows Desktop
The Button Manager application can be launched from the Windows System Tray.
Tap to open the Button Manager configuration user interface.The configure user interface has three major parts: Button Icons,
Button Functions, Button Modes. The Button Icons are
located close to physical button locations. The icons show current assigned
function.
Button functions section will list all available functions for current system
model.
NOTE: Different models may have different functions available.
Button modes: The button assignment for Windows logon page and normal desktop
page is different. Not all functions are available for Windows logon mode. And
if the system has more physical buttons, you can assign one button as “Fn”
button, to make other buttons have an another set of functions by holding down
the Fn button.
Assign a Function to a Button
Buttons are pre-defined for most common uses. To view/change the function assigned to a button:
- Tap on the button icon you want to work on, the current assigned function will be highlighted in the button function area.
- Select the function to assign in the button function area by tapping on the related icon.
- If the selected function has a 2nd level parameter, you will be prompted to input your options. For example; Brightness has the options of Up, Down, Max, Min, On/Off.
- Once you confirm your option, the assignment is done. You can continue to configure the rest of the buttons.
By default, all functions are configured for “Normal” desktop mode. If you want to assign a button to function under “Winlogon” mode, you need to switch the mode to “Winlogon”. Then follow the above “Assign a function to a button” to change any assignment of the button.
Button Function Descriptions
| A button with no function. You can use this function to disable one button.
---|---
| A button to launch an application within parameter. 2nd option to input
necessary application path and parameter.
| A button to define as Fn button. It needs to be combined with other buttons
to function (not recommended unless you need more button functions than there
are physical buttons).
| A button to launch Internet Explorer.
| A button to adjust system sound volume. 2nd option to choose volume Up,
Down, and Mute.
| A button to launch “Mobility Center”.
| A button to trigger screen rotation; 2nd option to choose rotation degree of
90, 180, 270.
| A button to launch onscreen keyboard.
| A button to change brightness settings; 2nd option to choose brightness Up,
Down, Maximum, Minimum, and screen On/Off.
| A button to set Hot Key; 2nd option to choose Ctrl, Alt, Shift, and the key.
| A button to trigger barcode scanner embedded in system.
| A button to trigger Camera. It only works with DTR Camera app (DTMSCAP).
| A button to trigger system Security key (Ctrl-Alt-Del combination).
| A button to trigger “Windows Key”.
| A button to launch “Control Center”, a DTR application to provide major
system setting controls.
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2022, DT Research, Inc. All Rights Reserved.
BBC A4 ENG 010422