Schneider Electric EDB14020EPD MCB E Frame Mini Circuit Breaker Instructions
- June 9, 2024
- Schneider Electric
Table of Contents
EDB14020EPD MCB E Frame Mini Circuit Breaker
Instruction Manual
End of Life Instructions
Recommendation| Number on
drawing| Component / Material| Weight (in g)| Comment
---|---|---|---|---
To be depolluted| | Electronic Board (Communication) >
10cm²| 79.13| Including all soldering parts
Product description
| Manufacturer identification | Schneider Electric Industries SAS |
|---|---|
| Brand name | Square D |
| Product function | The main purpose of the MCB E-Frame is to ensure protection |
of low voltage electrical
installations.
Product reference| EDB14020EPD
Total representative product mass| 910 g
Representative product dimensions| 169mm x 50mm x 103mm
Accessories| No
Date of information release| Nov-21
Additional information
Legal information| This product family is in the scope of European Union
directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE). The product family must be disposed according
to the
legislation of the country. This document is intended for use by end of life
recyclers or treatment
facilities. It provides the basic information to assure an appropriate end of
life treatment for the
components and materials of the product.
---|---
In case of special transportation:transportation method| No
Recyclability potential| 31%
Based on “ECO’DEEE recyclability and recoverability calculation method”
(version V1,
20 Sep. 2008 presented to the French Agency for Environment and Energy
Management: ADEME).
ENVEOLI1405001_V2 – End of Life Instructions – MCB E-Frame
Schneider Electric Industries SAS
Country Customer Care Center
http://www.schneider-electric.com/contact
35, rue Joseph Monier
CS 30323
F- 92506 Rueil Malmaison Cedex
RCS Nanterre 954 503 439
Capital social 896 313 776 €
www.schneider-electric.com
Published by Schneider Electric
ENVEOLI1405001_V2
© 2019 – Schneider Electric – All rights reserved