Miele 11 834 100-02 Dishwasher User Manual

11 834 100-02 Dishwasher

Operating instructions Dishwasher

To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions as well as the installation sheet before it is installed and used for the first time.

en-GB

HG07

M.-Nr. 11 834 100

Contents
Warning and safety instructions ……………………………………………………………. 5 Notes on the operating instructions ………………………………………………………. 15 Notes on the layout ………………………………………………………………………………… 15 Scope…………………………………………………………………………………………………… 16 Guide to the appliance ………………………………………………………………………….. 17 Appliance overview ………………………………………………………………………………… 17 Control panel …………………………………………………………………………………………. 18 Display functions ……………………………………………………………………………………. 19 Caring for the environment …………………………………………………………………… 20 Before using for the first time ……………………………………………………………….. 21 Opening the door …………………………………………………………………………………… 21 Closing the door…………………………………………………………………………………….. 22 Activating the safety lock ………………………………………………………………………… 22 Basic settings ………………………………………………………………………………………… 23
Setting the language ………………………………………………………………………….. 23 Setting the water hardness level ………………………………………………………….. 23 Dishwasher salt ……………………………………………………………………………………… 25 Filling the salt reservoir……………………………………………………………………….. 26 Refilling the salt …………………………………………………………………………………. 27 Rinse aid……………………………………………………………………………………………….. 28 Adding rinse aid ………………………………………………………………………………… 29 Filling the rinse aid reservoir………………………………………………………………… 29 Settings ……………………………………………………………………………………………….. 30 Opening the settings menu ……………………………………………………………………… 30 Changing settings ………………………………………………………………………………….. 30 Closing the settings menu……………………………………………………………………….. 30 Language …………………………………………………………………………………………… 31 Water hardness ……………………………………………………………………………………… 31 Rinse aid……………………………………………………………………………………………….. 32 Consumption (EcoFeedback) …………………………………………………………………… 32 Display brightness………………………………………………………………………………….. 33 Refill reminders………………………………………………………………………………………. 33 AutoOpen ……………………………………………………………………………………………… 33 Extra clean…………………………………………………………………………………………….. 33 Extra dry ……………………………………………………………………………………………….. 34 2nd interim rinse…………………………………………………………………………………….. 34 Hygiene cycle ………………………………………………………………………………………… 34 Software version…………………………………………………………………………………….. 35
2

Contents
Showroom …………………………………………………………………………………………….. 35 Factory default……………………………………………………………………………………….. 35 Caring for the environment …………………………………………………………………… 36 Economical dishwashing…………………………………………………………………………. 36 EcoFeedback consumption indicator………………………………………………………… 37 Loading the dishwasher………………………………………………………………………… 38 General information ………………………………………………………………………………… 38 Upper basket…………………………………………………………………………………………. 40 Adjusting the upper basket ……………………………………………………………………… 43 Lower basket …………………………………………………………………………………………. 44 Cutlery tray/cutlery basket (depending on model) …………………………………………………………………………….. 46
Loading the 3D MultiFlex tray………………………………………………………………. 46 Loading the cutlery basket ………………………………………………………………….. 47 Loading examples ………………………………………………………………………………….. 48 Dishwashers with cutlery tray………………………………………………………………. 48 Dishwashers with cutlery basket………………………………………………………….. 50 Detergent …………………………………………………………………………………………….. 52 Active ingredients ………………………………………………………………………………….. 52 Detergent dispensing ……………………………………………………………………………… 53 Adding detergent……………………………………………………………………………………. 54 Operation……………………………………………………………………………………………… 55 Switching on the dishwasher …………………………………………………………………… 55 Selecting a programme …………………………………………………………………………… 55 Display programme duration ……………………………………………………………………. 56 Starting the programme ………………………………………………………………………….. 56 End of programme………………………………………………………………………………….. 57 Energy management ………………………………………………………………………………. 57 Switching off the dishwasher …………………………………………………………………… 58 Unloading the dishwasher……………………………………………………………………….. 58 Interrupting a programme………………………………………………………………………… 59 Cancelling or changing a programme ……………………………………………………….. 59 Options ………………………………………………………………………………………………… 60 Timer ……………………………………………………………………………………………….. 60 Guide for selecting a programme ………………………………………………………….. 62 Programme overview ……………………………………………………………………………. 64 Further programmes ………………………………………………………………………….. 66
3

Contents
Programme options………………………………………………………………………………. 67 Selecting programme options ………………………………………………………………….. 67
Express ………………………………………………………………………………………… 67 IntenseZone …………………………………………………………………………………. 67 Cleaning and care ………………………………………………………………………………… 68 Cleaning the wash cabinet ………………………………………………………………………. 68 Cleaning the door and the door seal…………………………………………………………. 69 Cleaning the control panel ………………………………………………………………………. 69 Cleaning the appliance front ……………………………………………………………………. 70 Cleaning the spray arms………………………………………………………………………….. 71 Checking the filters in the wash cabinet ……………………………………………………. 74 Cleaning the filters………………………………………………………………………………….. 74 Cleaning the water inlet filter ……………………………………………………………………. 76 Cleaning the drain pump …………………………………………………………………………. 77 Problem solving guide ………………………………………………………………………….. 79 Technical problems ………………………………………………………………………………… 79 Fault messages ……………………………………………………………………………………… 80 Door release ………………………………………………………………………………………….. 81 Water inlet fault ……………………………………………………………………………………… 82 Water drainage fault ……………………………………………………………………………….. 83 General problems with the dishwasher ……………………………………………………… 84 Noises…………………………………………………………………………………………………… 85 Unsatisfactory washing result ………………………………………………………………….. 86 Service…………………………………………………………………………………………………. 90 Contact in the event of a fault ………………………………………………………………….. 90 EPREL database ……………………………………………………………………………………. 90 Warranty ……………………………………………………………………………………………….. 90 Note for test institutes …………………………………………………………………………….. 91 Optional accessories ……………………………………………………………………………. 92 Installation……………………………………………………………………………………………. 94 The Miele Waterproof system…………………………………………………………………… 94 Water inlet …………………………………………………………………………………………….. 94 Regulation in Germany……………………………………………………………………………. 95 Water drainage ………………………………………………………………………………………. 96 Electrical connection ……………………………………………………………………………… 98 Technical data………………………………………………………………………………………. 99
4

Warning and safety instructions
This dishwasher conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Please observe the installation sheet and read the operating instructions carefully before setting up the dishwasher and using it for the first time. They both contain important information on its installation, safety, use and maintenance. This is to protect yourself from injury and prevent damage to the dishwasher. In accordance with standard IEC 60335-1, Miele expressly and strongly advises that you read and follow the instructions in the chapter on installing the dishwasher as well as the safety instructions and warnings. Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep the installation sheet and the operating instructions in a safe place and pass them on to any future owner.
5

Warning and safety instructions Appropriate use This dishwasher is intended for use in domestic households and
similar working and residential environments. This dishwasher is not intended for outdoor use. This dishwasher is intended for use at altitudes of up to 4000 m above sea level. This dishwasher must only be used for cleaning domestic crockery and cutlery. All other types of use are not permitted. The appliance can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised whilst using it, or have been shown how to use it in a safe way and recognise and understand the consequences of incorrect operation.
6

Warning and safety instructions Safety with children Children under 8 years of age must be kept away from the dish-
washer unless they are constantly supervised. Children aged 8 and older may only use the dishwasher without supervision if they have been shown how to use it in a safe manner. Children must be able to understand and recognise the possible dangers caused by incorrect operation. Children must not be allowed to clean or maintain the dishwasher unsupervised. Children should be supervised in the vicinity of the dishwasher. Never allow children to play with the dishwasher. There is a danger that children might shut themselves in the dishwasher. If the automatic door opening mechanism is active (depending on the model), keep young children away from the area in which the door opens. There is a danger of injury in the unlikely event of a fault with the opening mechanism. Danger of suffocation! Whilst playing, children may become entangled in packaging material (such as plastic wrapping) or pull it over their head and risk suffocation. Keep packaging material away from children. Keep children away from detergents. Detergents cause severe skin burns and severe eye damage. They can cause burning in the mouth and throat, or inhibit breathing. It is therefore important to keep children away from the dishwasher when the door is open. Detergent residues could still be present in the dishwasher. Seek medical advice immediately if a child has swallowed or inhaled any detergents.
7

Warning and safety instructions Technical safety Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and repairs must only be carried out by a qualified technician. Damage to the dishwasher can compromise your safety. Before using the dishwasher and in particular following transport, check it for any visible damage. Never use a damaged dishwasher. The electrical safety of this dishwasher can only be guaranteed when correctly earthed. It is most important that this basic safety requirement is present. If in doubt, the electrical installation should be checked by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate or lack of earthing system (e.g. electric shock). Temporary or permanent operation on an autonomous power supply system or a power supply system that is not synchronised with the mains power supply (e.g. island networks, back-up systems) is possible. A prerequisite for operation is that the power supply system complies with the specifications of EN 50160 or an equivalent standard. The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronised with the mains power supply, or these measures must be replaced by equivalent measures in the installation. As described, for example, in the current version of BS OHSAS 18001­2 ISO 45001. The dishwasher must only be plugged into the electricity supply via a suitable switched socket using a fused 3-pin plug (it must not be hard-wired). The electrical socket must be easily accessible after the dishwasher is installed so that it can be disconnected from the electricity supply at any time.
8

Warning and safety instructions
There must be no electrical sockets behind the dishwasher because the building-in niche may be too small. Danger of overheating and fire risk if the dishwasher were to be pushed up against a plug. The dishwasher must not be installed underneath a hob. The high temperatures radiated by hobs could damage the dishwasher below. For the same reason, the appliance must not be installed next to open fires or other appliances that give off heat, such as heaters etc., not normally found in a kitchen. Ensure that the connection data on the dishwasher’s data plate (fuse rating, frequency and voltage) match the mains electricity supply. This data must correspond in order to avoid the risk of damage to the dishwasher. Compare these before connecting the appliance to the mains. If in any doubt, consult a qualified electrician. Do not connect the dishwasher to the mains supply until it has been fully installed and any adjustment has been made to the door springs. The dishwasher may only be operated if the door opening mechanism is working correctly. Otherwise there could be a risk of danger whilst the automatic door opening mechanism (depending on the model) is active. To check that the door opening mechanism is working correctly: – The door springs must be evenly adjusted on both sides. They are
correctly adjusted when the door remains stationary when left half open (approx. 45° opening angle). It is also important that the door cannot fall open. – The door locking pins automatically retract when the door opens at the end of the drying phase. Multi-socket adapters and extension leads do not guarantee the required safety of the appliance (fire hazard). Do not connect the dishwasher to the mains electricity supply using a multi-socket adapter or an extension lead.
9

Warning and safety instructions
The dishwasher must not be used in a non-stationary location (e.g. on a ship). Do not install the dishwasher in a room where there is a risk of frost occurring. Frozen hoses are at risk of tearing or bursting. The reliability of the electronic control unit may be impaired at temperatures below freezing point. To avoid any damage to the dishwasher, it must only be operated when it is connected to a fully vented plumbing system. The plastic housing of the water connection contains a solenoid valve. The housing must not be dipped in water. There are live wires in the water inlet hose. Do not cut the hose, even if it is too long. The integrated Waterproof system offers protection from water damage, provided that the following conditions are met: – Installation has been carried out correctly – The dishwasher is properly maintained and parts are replaced
where this is noticeably required – The stopcock is turned off during longer absences from the home
(e.g. whilst on holiday). The Waterproof system will work even when the dishwasher is switched off. However, the dishwasher must remain connected to the electricity supply. The water-connection pressure needs to be between 50 and 1,000 kPa. A damaged dishwasher could be dangerous. If the dishwasher gets damaged, switch it off at the mains immediately and call your Miele dealer or Miele Service. While the appliance is under warranty, repairs should only be undertaken by a Miele authorised service technician. Otherwise the warranty is invalidated.
10

Warning and safety instructions
We recommend replacing defective components with original spare parts. If original Miele spare parts are installed correctly, Miele ensures full compliance with safety requirements and the warranty remains valid. During installation, maintenance and repair work, the dishwasher must be disconnected from the mains electricity supply (switch it off and withdraw the plug from the socket). If the mains connection cable is damaged, it must only be replaced with a specific mains connection cable of the same type (available from the Miele Customer Service Department). For safety reasons this must only be done by the Miele Customer Service Department or a Miele authorised technician.
Correct installation The dishwasher must be installed and connected in compliance with the supplied installation sheet.
Be careful before and while installing the dishwasher. Some metal parts pose a risk of injury/being cut. Wear protective gloves. The dishwasher must be correctly aligned horizontally to ensure problem-free operation. In order to ensure stability, built-under and integrated dishwashers must only be installed under a continuous worktop that is secured to adjacent cabinetry. A sink in the adjacent cabinet of the dishwasher must be carefully sealed. Regularly check for leaks to avoid damage to the dishwasher. The dishwasher must only be built into a tall unit if additional safety precautions are taken. In order to safely install the appliance in a tall unit, please use the Tall unit installation set and observe the installation sheet provided. Otherwise there is the danger of the unit tipping over.
11

Warning and safety instructions
The door springs must be evenly adjusted on both sides. They are correctly adjusted when the door remains stationary when left half open (approx. 45° opening angle). It is also important that the door cannot fall open. The appliance must only be operated with properly adjusted door springs. If the door cannot be adjusted properly, contact the Miele Customer Service Department. The maximum weight of the front panel that can be aligned with the factory fitted door springs is 10­12 kg (depending on model). Correct use Do not use solvents in the dishwasher. Risk of explosion. Dishwasher detergents can cause burning on the skin and in the eyes, nose, mouth and throat. Avoid contact with detergents. Do not inhale powder detergents. Do not swallow dishwasher detergents. Seek medical attention immediately if detergent has been swallowed or inhaled. Avoid leaving the dishwasher door open unnecessarily. You could injure yourself on the open door or trip over it. Do not sit or lean on the open door. The dishwasher could tip over. This could injure you or damage the dishwasher. Crockery may be very hot at the end of the programme. Allow the dishes to cool until they are comfortable enough to handle before unloading them. Only use detergent and rinse aid formulated for domestic dishwashers. Do not use washing-up liquid. Do not use any commercial or industrial detergents. These may cause material damage, and there is a risk of a severe explosive chemical reaction (such as an explosive oxyhydrogen gas reaction).
12

Warning and safety instructions
Do not fill the rinse aid reservoir with powder or liquid detergent. This will cause damage to the reservoir. Do not fill the AutoDos (depending on model) with powder or liquid detergent. Loose detergent will damage the AutoDos. Do not fill the salt reservoir with powder or liquid detergent. Detergent will damage the water softener. Only use special coarse-grained dishwasher salt or other pure kitchen salt for reactivation. Other salts may contain insoluble additives that can impair the functioning of the water softener. In dishwashers with a cutlery basket (depending on model), knives and forks should be placed with the handles upwards in the basket for safety reasons. Knives and forks placed with the handles downwards pose a danger of injury. However, cutlery placed handle down in the basket will come out cleaner and drier. Plastic items that cannot withstand being washed in hot water, such as disposable plastic containers or plastic cutlery, should not be cleaned in the dishwasher. The high temperatures in the dishwasher may cause them to melt or lose shape. If you use the timer option (depending on model), the detergent compartment must be dry. If it is not, wipe it until dry. The detergent will clump together if the detergent compartment is not dry, and this may mean that it is not fully rinsed out. Please observe the information given in the “Technical data” chapter regarding the capacity of the dishwasher. Accessories and spare parts Only use original Miele accessories. If other parts are used, warranty, performance and, if applicable, product liability claims will be invalidated.
13

Warning and safety instructions Miele will guarantee to supply functional spare parts for a min-
imum of 10 years and up to 15 years following the discontinuation of your dishwasher. Transport Damage to the dishwasher can compromise your safety. Before using the dishwasher, check it for any visible transport damage. Never use a damaged dishwasher. Only transport the dishwasher in an upright position so that no water flows into the electrical controls, as this would cause faults. If you wish to transport the dishwasher, empty it and securely fasten all loose parts such as baskets, hoses and mains connection cables.
14

Notes on the operating instructions

These operating instructions apply to several different dishwasher models of different heights. The different dishwasher models will be named as follows: normal = dishwasher measuring 80.5 cm high (built-in appliance) or 84.5 cm high (freestanding appliance) XXL = dishwasher measuring 84.5 cm high (built- in appliance).
Notes on the layout
Warnings
Information which is important
for safety is highlighted in a thick framed box with a warning symbol. This alerts you to the potential danger of injury to people or damage to property. Read these warning notes carefully and observe the procedural instructions and codes of practice they describe.
Notes Notes provide information of particular importance that must be observed. They are highlighted in a thick framed box.

Additional information and comments Additional information and comments are highlighted in a box framed with a single black line.
Instructions for the user Instructions on how to operate the dishwasher are identified by marked operating steps. They explain the procedure step by step. Operating steps are indicated by a black square bullet point. Example: Select the desired setting and press OK to confirm.
Display Information given via the dishwasher display appears in a special display font to match the font on the appliance. Example: When the message Close the door appears in the display …

15

Scope
The appliance is supplied with: – Dishwasher – Operating instructions for operating
the dishwasher – Installation sheet for installing the
dishwasher – Other installation accessories for in-
stalling the dishwasher (see installation sheet) – Funnel for filling the dishwasher salt – Additional printed matter and addons if required
16

Appliance overview

Guide to the appliance

a Door locking pins b Top spray arm c 3D MultiFlex cutlery tray (depending
on model) d Upper basket (depending on model) e Middle spray arm f Aeration valve

g Bottom spray arm h Filter combination i Salt reservoir j Data plate k Rinse aid reservoir l Detergent compartment

17

Guide to the appliance
Control panel

a Programme selection

g OK button

ECO Auto

= ECO = Auto 45­65 °C

To select menu options and values displayed. To confirm messages.

45 °C = Gentle 45 °C

h buttons

65 °C = QuickPowerWash 65 °C For programme selection.

75 °C = Intensive 75 °C

For changing the values displayed.

= Further programmes/

For scrolling to other menu pages.

settings

i Back button

b Display For further information, see “Guide to the appliance” in the “Display

For navigating back to the previous menu or deleting values that have been set previously.

functions” section.

j Programme selection button

c Start button with indicator light

For programme selection.

For starting the selected programme. k Optical interface

d IntenseZone button

For service technicians.

Increases cleaning performance in

l ON/OFF button

the lower basket.

For switching the dishwasher on and

e Express button

off.

For reducing the programme dura-

tion.

f Timer button For selecting a later programme start.

18

Guide to the appliance

Display functions
The display is used to select or set the following: – The programme – The timer – The Settings The display can show the following: – The programme stage – The estimated time left for the pro-
gramme to run – The energy and water consumption
(EcoFeedback) – Any relevant fault messages and in-
formation
To save energy, the dishwasher switches off after a few minutes if you do not press any buttons during this time. Press the button to switch the dishwasher back on.

The OK button is used to confirm messages or settings and also to move to the next menu or another menu level. Under Further programmes/settings, a scroll bar will appear in the right of the display. This offers further options. These options can be shown using the buttons. You can alter the dishwasher’s controls to suit changing requirements in the Settings menu (see “Settings” chapter). The option that is selected will have a tick next to it. To exit a sub-menu again, press the Back button. If you do not press any buttons for several seconds, the display will revert to the previous menu. You may then have to enter your settings again.

19

Caring for the environment

Disposing of the packaging material
The packaging material is used for handling and protects the appliance from transport damage. The packaging material used is selected from materials which are environmentally friendly for disposal and can generally be recycled. Recycling the packaging material reduces the use of raw materials. Use material-specific collection points for valuable materials and take advantage of return options. Your Miele dealer will take the packaging material away.

Disposing of your old appliance
Electrical and electronic appliances contain many valuable materials. They also contain certain materials, compounds and components which were essential for their correct functioning and safety. These could be hazardous to human health and to the environment if disposed of with household waste or if handled incorrectly. Please do not, therefore, dispose of your old appliance with household waste.

Instead, please make use of officially designated collection and disposal points to dispose of and recycle electrical and electronic appliances in your local community, with your dealer or with Miele, free of charge. By law, you are solely responsible for deleting any personal data from the old appliance prior to disposal. You are legally obliged to remove any old batteries which are not securely enclosed by the appliance and to remove any lamps without destroying them, where this is possible. These must be taken to a suitable collection point where they can be handed in free of charge. Please ensure that your old appliance poses no risk to children while being stored for disposal.

20

Before using for the first time

Every dishwasher is tested at the factory. There will be residual water in the appliance from this test. It is not an indication that the dishwasher has been used previously.
Opening the door
In some programmes the door automatically opens slightly to assist the drying process. This function can be deactivated, if preferred (see “Settings” chapter, “AutoOpen”).

At the end of the programme, if the AutoOpen function is on, the door locking pins automatically retract.
To prevent a technical fault, do not hold the door locking pins firmly when they are retracting.
If the door is opened during operation all wash functions are automatically interrupted.
Risk of scalding due to hot wa-
ter. During operation, water in the dishwasher may be very hot. During operation, only open the door with extreme caution.

Risk of injury due to door open-
ing automatically. The door may open automatically at the end of a programme. Keep the area around the door free of obstructions.

To open the door, reach under the door grip and pull.
Open the door fully to disengage the locking mechanism.

21

Before using for the first time

Closing the door
Push the baskets right in. Raise the door upwards until the
catch engages.
Risk of crushing due to the door
closing. When closing the door, you are at risk of shutting your fingers in it. Do not put your hand inside the door as it is closing.

Activating the safety lock
Use the safety lock to prevent children opening the dishwasher door. The door can then only be opened by using a lot of force.

To lock the door, push the slide underneath the door grip to the right.
To unlock the door, push the slide to the left.

22

Before using for the first time

Basic settings
Switching on the dishwasher Switch the dishwasher on with the
button. The welcome screen will appear when the dishwasher is switched on. For further information about the display functionality, see the “Display functions” section in the “Guide to the appliance” chapter.
Setting the language The display will then change automatically to the screen for setting the language. Select the language you want as well
as the country, if applicable, using the buttons and confirm with OK. For further information on setting the language, see the “Language” section in the “Settings” chapter. A tick will appear next to the language that has been set.

Setting the water hardness level The display will change to the screen for setting the water hardness. – You should programme the dish-
washer to the correct water hardness for your area. – Your local water authority will be able to advise you of the water hardness level in your area. – Where the water hardness fluctuates e.g. between 1.8 and 2.7 mmol/l (10 15 °dH – German scale) always programme the dishwasher to the higher value (2.7 mmol/l or 15 °dH in this example). In the event of a fault, it will help the service technician if you know the hardness of your local water supply. Therefore, please enter the water hardness: ____°dH or mmol/l The dishwasher is programmed at the factory for a water hardness level of 2.5 mmol/l (14 °dH ­ German scale). Set the water hardness level in your area and confirm using OK.

See the “Settings” chapter, “Water hardness” section for more information.

23

Before using for the first time
Finally, prompts will appear in the display. After confirming these prompts with OK, the messages Refill salt and Refill rinse aid may appear. Add salt and rinse aid if necessary
(see “Before using for the first time ­ Dishwasher salt” and “Rinse aid”). Select OK to confirm the messages. The programme selected will briefly appear in the display and the indicator light for the programme selected will come on. Next, the estimated energy and water consumption may be shown for the chosen programme for several seconds. Then the display will show the estimated running time for the programme selected.
24

Before using for the first time

Dishwasher salt
In order to achieve good cleaning results, the dishwasher needs to operate with soft water. Hard water results in the build-up of calcium deposits on crockery and on the wash cabinet walls. Mains water with a water hardness level higher than 0.9 mmol/l (5 °dH ­ German scale) must be softened. This occurs automatically in the integrated water softener. The water softener is suitable for a water hardness level of up to 12.6 mmol/l (70 °dH ­ German scale).
In order to maintain the functions of the water softener, it must be reactivated regularly. Reactivation occurs automatically every ninth programme sequence. At the start of the next programme, an additional 4.4 l of water is required for this process. Energy consumption increases by 0.015 kWh and the programme is extended by approx. 3 minutes. The above only applies to the ECO programme at a water hardness of 2.5 mmol/l (14 °dH ­ German scale). For other programmes and water hardness levels, the frequency of reactivation will differ. In order to be reactivated, the water softener requires dishwasher salt. Depending on the water hardness level (< 3.8 mmol/l, or < 21 °dH ­ German scale), dishwasher salt is not required if combination detergents are being used (see “Detergent ­ Powder detergent and detergent tabs”).

If the water in your area is very soft and constantly lower than 0.9 mmol/l (5 °dH ­ German scale), you do not need to add dishwasher salt. The salt refill indicator will automatically switch off after the water hardness has been set accordingly (see “Settings ­ Water hardness”).
Damage to the water softener
from detergent. Detergent will damage the water softener. Do not fill the salt reservoir with powder or liquid detergent.
Damage caused by using unsuit-
able salts. Some types of salt may contain insoluble components which can cause the water softener to malfunction. Only use special coarse-grained dishwasher salt or other pure kitchen salt for reactivation.
If you only ever use combination detergent products in your dishwasher, you can turn off both refill reminders if you wish (see “Settings ­ Refill reminders”).
Please make sure that if you stop using combination detergent products, you refill the dishwasher salt and rinse aid. Switch the refill reminders back on if required.

25

Before using for the first time

Filling the salt reservoir Before filling the salt reservoir for the first time, you must fill it with approx. 2 l of water to enable the salt to dissolve. Once the dishwasher has been used once, there is always sufficient water in the salt reservoir. Remove the lower basket from the
wash cabinet and unscrew the salt reservoir cap.
Danger of corrosion due to saline
solution. Water or saline solution will run out of the reservoir when the cap is opened. Saline solution that runs out can cause corrosion in the wash cabinet and to the dishwasher load. The salt reservoir should therefore only be opened in order to replenish the salt.
Fill the salt reservoir with approx. 2 l of water (first use only).

Place the funnel provided over the salt reservoir and carefully fill with dishwasher salt until the reservoir is full. The salt reservoir holds up to 2 kg of salt, depending on the type of salt used.
Clean off salt residues from around the salt reservoir opening. Next, screw the salt reservoir cap on again firmly.
Immediately after filling the salt reservoir and each time you remove the salt container cap, run the 65 °C QuickPowerWash programme with the Express programme option selected without a load in the dishwasher to dissolve and remove any traces of salt from the wash cabinet.

26

Before using for the first time

Refilling the salt When Refill salt appears in the dis-
play, wait until the end of the programme and then refill the salt reservoir.
Confirm with OK. The salt refill indicator will go out.
Risk of corrosion due to saline
solution. Saline solution that runs out can cause corrosion in the wash cabinet and to the load items. Each time you remove the salt reservoir cap, you must run the 65 °C QuickPowerWash programme with the Express programme option selected without any load items in the dishwasher. This will dissolve and remove any traces of salt from the wash cabinet.

After the salt reservoir has been filled, the salt refill indicator may still appear in the display if the salt concentration has not yet reached the correct level. In this case, confirm the message again with OK. The salt refill indicator will be switched off if you have programmed the dishwasher for a water hardness below 0.9 mmol/l (5 °dH ­ German scale).

27

Before using for the first time

Rinse aid
Rinse aid is necessary to ensure that water does not cling and leave marks on crockery during the drying phase, and helps crockery dry faster after it has been washed. Rinse aid is poured into the container and the amount set is dispensed automatically.
Washing-up liquid or detergent
can cause damage. Washing-up liquid and detergent can damage the rinse aid container. Only fill it with rinse aid formulated for domestic dishwashers.
Alternatively, you could use liquid citric acid at a concentration of up to 10 %. The resulting rinsing and drying quality on the crockery will not, however, be as good as when rinse aid is used.
Risk of acid damage.
The dishwasher can be damaged by high concentrations of acid. Under no circumstances should you use citric acid with a higher acid content.

If you only ever wish to use combination products in your dishwasher, you do not need to add rinse aid. However, for optimum rinsing and drying results, use dishwasher detergent and add dishwasher salt and rinse aid separately. If you only ever use combination detergent products containing salt and rinse aid in your dishwasher, you can switch off both refill reminders if you wish (see “Settings ­ Refill reminders”). Please make sure that if you stop using combination detergents, you refill the dishwasher salt and rinse aid. Switch the refill reminders back on if required.

28

Before using for the first time

Adding rinse aid
Press the yellow button on the lid of the rinse aid reservoir.
The lid will spring open.

Close the lid firmly until you hear it click into place. Otherwise, water can enter the rinse aid reservoir during a programme.
Wipe up any spilled rinse aid. This prevents excess foam developing during the next programme.
You can adjust the rinse aid dosage for the best wash result (see “Settings” chapter, “Rinse aid” section).
Filling the rinse aid reservoir When the refill reminder Refill rinse aid appears in the display, the reservoir contains sufficient rinse aid for 2 to 3 programmes only. Refill with rinse aid in plenty of time. Confirm with OK. The rinse aid refill reminder will disappear.

Fill with rinse aid until the filling level indicator (arrow) changes to a dark colour while the door is horizontally open.
The rinse aid reservoir holds approximately 110 ml.
29

Settings

You can alter the dishwasher’s controls to suit changing requirements by adjusting the settings. The settings can be altered at any time.
Opening the settings menu
Switch the dishwasher on with the button if it is switched off.
Use the programme selection button to select the Further programmes/settings option .
The first of the further programmes will appear in the display. Select the Settings menu option us-
ing the buttons and confirm with OK. The first option in the Settings menu will appear in the display.

Changing settings
Use the buttons to select the menu option you want to change and confirm your selection with OK.
Sub-menu options that have already been selected will have a tick beside them. Use the buttons to select the
setting you want and confirm with OK. To exit a sub-menu again, use the Back button. The display will revert to the menu above.
Closing the settings menu
Press the button. The display will change to the menu.

For further information about the display functionality, see the “Display functions” section in the “Guide to the appliance” chapter.

30

Settings

Language
The display can be set to appear in one of several different languages. You can change the language used in the display and also the country via the Language sub-menu.
The flag after the word Language serves as a guide if a language that you do not understand has been set. In this case keep selecting the menu option that has a flag after it until you reach the Language sub-menu.

Water hardness
Your dishwasher is fitted with a water softener. – You should programme the dish-
washer to the correct water hardness for your area. – Your local water authority will be able to advise you of the water hardness level in your area. – Where the water hardness fluctuates e.g. between 1.8 and 2.7 mmol/l (10­ 15 °dH – German scale) always programme the dishwasher to the higher value (2.7 mmol/l or 15 °dH in this example).
If the water hardness in your area is available in a unit other than °dH, you can convert the values as follows: 1 °dH = 0.18 mmol/l = 1.78 °fH

Setting the water hardness level Select the water hardness level in
your area and confirm using OK.

31

Settings

Rinse aid
You can adjust the rinse aid dosage for best results. The rinse aid dosage can be set from 0 to 6 ml. 3 ml is the factory default setting. The rinse aid dosage can turn out to be higher than the set value due to the automatic adjustment of the programme. If spots appear on crockery and glassware: – Increase the rinse aid dosage. If clouding or smearing appears on crockery and glassware: – Decrease the rinse aid dosage.

Consumption (EcoFeedback)
You can set whether the energy and water consumption is displayed for the selected programme. This function shows the estimated consumption before a programme, and the actual consumption after the end of the programme. In this menu you can also call up the total consumption of energy and water for all the wash programmes you have previously run on your dishwasher (see “Caring for the environment” chapter, “EcoFeedback consumption “display section).
Display Consumption Select the Consumption display menu
option and confirm with OK. Select the setting you want and con-
firm with OK.
Display Total consumption Select the Total consumption menu op-
tion and confirm with OK. You can display the values for Energy
and Water using the buttons. You can also reset the values for the total consumption to 0. Select the Reset menu option and
confirm with OK. Select the Yes menu option and con-
firm with OK. Confirm the message with OK. The values are now reset to 0.

32

Settings

Display brightness
You can set the display brightness to one of seven different levels.
Refill reminders
If you only ever use combination detergent products or automatic dispensing using Miele PowerDisks (if available), you can switch off the refill reminders for dishwasher salt and rinse aid if you wish.
Please make sure that if you stop using combination detergents, you refill the dishwasher salt and rinse aid. Switch the refill reminders back on.

AutoOpen
In some programmes the door automatically opens slightly to assist the drying process.
This function can be deactivated if you wish.
Risk of damage due to steam.
Steam from the dishwasher could damage the edges of delicate worktops when you open the door at the end of the programme if the fan is no longer running. If you have deactivated the automatic door opening function but would still like to open the door at the end of the programme, then make sure that you open the door fully.

Extra clean
You can choose this function to increase the cleaning performance of the programmes. If you activate this function, the programme running times and the main wash temperatures will increase. The water and energy consumption may increase. If this function is switched on, it will be applied to all programmes until it is switched off again (except for the ECO programme).

33

Settings

Extra dry
You can select this function in order to increase the programme drying performance. If you activate this function, the programme running times and final rinse temperatures will increase. The energy consumption may increase. If this function is switched on, it will be applied to all programmes until it is switched off again (except for the ECO programme).
2nd interim rinse
You can choose this function to increase the cleaning performance of the programmes with a second interim rinse. When this function is activated, water consumption may increase. If this function is switched on, it will be applied to all programmes until it is switched off again (except for the ECO programme).

Hygiene cycle
If you mainly use low temperature programmes (< 50 °C), there is a risk of bacteria and unpleasant odours building up in the wash cabinet (see “Cleaning and care ­ Hygiene cycle”). If this function is switched on, a message will be displayed recommending the use of a high temperature programme after several low temperature programmes have been run.

34

Software version
You can call up the electronic software version of your dishwasher for technical support purposes.
Showroom
For demonstration purposes only. The dishwasher is equipped with a demo mode for showroom use.
Factory default
You can reset all dishwasher settings to the factory default settings. Select Reset and confirm with OK.

Settings

35

Caring for the environment

Economical dishwashing
This dishwasher is exceptionally economical in its use of water and electricity. You can make the most of your appliance by following these tips: – Washing in a dishwasher generally
uses less water and energy than washing by hand. – There is no need to pre- wash items under running water, and this unnecessarily increases water and energy consumption. – For the most economical dishwashing, make full use of the basket capacity without overloading the dishwasher. This results in the most economical dishwashing in terms of energy and water consumption. – Choose the programme to suit the type of crockery being washed and the degree of soiling (see “Programme overview”). – Select the ECO programme for energy- saving dishwashing. This programme is the most efficient in terms of its combined energy and water consumption for cleaning crockery with a normal level of soiling. – Follow the detergent manufacturer’s recommendations on detergent dosage. – When using powder or liquid detergent, you can use 1/3 less detergent if the baskets are only half full.

– You can connect the dishwasher to a hot water supply. A hot water connection is particularly suitable with energy-saving water heating sources, such as solar energy with a circulation system. If the water is heated by electricity, we would recommend connection to cold water.

36

Caring for the environment

EcoFeedback consumption indicator
The Consumption function is used for calling up information about the energy and water consumption of your dishwasher (see “Settings” chapter, “Consumption” section). The following information can be shown on the display: – An estimate of the consumption be-
fore the programme begins – The actual consumption at the end of
the programme – The total consumption of the dish-
washer
1. Consumption estimate After a programme has been selected, first the name of the programme and after a few seconds the estimated energy consumption and water consumption will appear in the display. The estimated consumption will be shown as a bar chart. The more bars that are visible ( ), the higher the energy or water consumption. The values are influenced by the programme, any programme options selected, the ambient conditions and the size of the load. The display will change automatically from showing the estimated consumption to showing the time remaining. The estimated consumption function is activated as standard. This function can be deactivated, if preferred (see “Settings”, “Consumption” section).

2. Display consumption At the end of the programme you can call up the actual amount of energy and water used by the programme that has just been run. Confirm the Consumption (OK) mes-
sage with OK.
Switching the dishwasher off at the end of the programme will delete the actual consumption values for the programme that has just been run.
3. Total consumption You can view the total consumption of energy and water for all previously used programmes of your dishwasher (see “Settings” chapter, “Consumption” section).

37

Loading the dishwasher

General information
Remove coarse food residues from crockery. There is no need to pre-rinse items under running water.
Damage can be caused by ash,
sand, wax, lubricating grease or paint. These substances will contaminate the dishwasher and can then no longer be removed. Do not wash items soiled with these substances in the dishwasher.
Crockery can be loaded anywhere in the baskets, but the following notes should be observed: – Do not place crockery and cutlery in-
side other items where they will cover one another. – Load the crockery so that water can access all surfaces. This ensures that they get properly cleaned. – Make sure that all items are securely positioned. – Hollow items such as cups, glasses, pots etc. must be placed upside down in the baskets. – Tall and narrow hollow items, such as champagne glasses, should be placed in the middle of the basket rather than in the corners. This ensures the hollow items are more easily accessed by the water jets. – Wide-based items should be placed at an angle so that water can run off them freely.

– The spray arms must not be blocked by items that are too tall or hang through the baskets. Test for free movement by manually rotating the spray arms.
– Make sure that small items cannot fall through the holders in the baskets. Small items such as lids should therefore be placed in the 3D MultiFlex tray or cutlery basket (depending on model).
Some foods may contain natural dyes, e.g. carrots, tomatoes or ketchup. These dyes can discolour plastic items in the dishwasher if large quantities of these foods are in contact with the crockery inside the appliance. The stability of plastic items is not affected by this discolouration. Washing silverware can also cause plastic items to discolour.

38

Loading the dishwasher

Items not suitable for dishwashers: – Wooden cutlery and crockery or
items with wooden parts: these may discolour and fade. The glue used in these items is not dishwasher-proof and wooden handles may come loose after being washed in a dishwasher. – Craft items, antiques, valuable vases and decorative glassware: such items are not suitable for dishwashers. – Plastic items that are not heat resistant: the high temperatures in the dishwasher may cause them to melt or lose shape. – Copper, brass, tin and aluminium items: these may discolour or become dull. – Colours painted over a glaze: these may fade after a number of washes. – Delicate glassware and glassware containing lead crystal: clouding may occur over time. Silver Silver that has been in contact with foods containing sulphur can discolour. These include egg yolk, onions, mayonnaise, mustard, pulses, fish, fish brine and marinades. Silverware previously cleaned with a silver polish may still be damp or spotted at the end of a programme, where water has not run off smoothly. Tip: Rub the silver dry with a cloth.

Damage due to caustic alkaline
detergents. Aluminium parts (e.g. the grease filters of cooker hoods) can be damaged by caustic alkaline detergents. In extreme cases, there is a risk of an explosive chemical reaction (such as an explosive oxyhydrogen gas reaction). Aluminium components must not be cleaned in the dishwasher with caustic alkaline commercial or industrial detergents.
Tip: When purchasing new crockery and cutlery, make sure they are dishwasher- proof if you want to wash them in the dishwasher.
Glass care – Clouding may occur on glasses after
frequent washing in the dishwasher. When washing delicate glassware in the dishwasher, ensure that only a special glass care programme with very low temperatures is selected (see “Programme overview”). This will reduce the risk of clouding. – Purchase glassware that is dishwasher-safe (e.g. Riedel glassware). – Use detergents with glass protective additives.

39

Loading the dishwasher

Upper basket
See the “Loading the dishwasher” chapter, “Loading examples” section for examples of how to load crockery and cutlery. Loading the upper basket

Loading the FlexCare cup rack You can put cups, small bowls and flat crockery on the FlexCare cup rack. Glasses can be arranged along the cup rack so they sit securely during the programme.

Damage due to leaking water.
If you run the dishwasher without the upper basket, water can leak out of the dishwasher. Only run the dishwasher with the upper basket in place (except during the programme Tall items, if available).

Use the upper basket for small, lightweight and delicate items such as cups, saucers, glasses, dessert bowls etc. Shallow pans or casserole dishes can also be placed in the upper basket.
Long items such as soup ladles and mixing spoons should be placed lying down across the front of the upper basket.

Lower the cup rack to do so. Raise the cup rack upwards to make
room for tall items.

40

Loading the dishwasher

Adjusting the FlexCare cup rack You can set the height and depth of the cup rack at two different levels. so that it can accommodate larger cups and so that taller crockery can be placed underneath it.

Loading the silicone elements of the FlexCare cup rack The silicone elements in the cup rack are specially designed to hold tall glasses with long stems securely.

Pull the cup rack upwards and click it into the desired position (see arrow).

Lower the cup rack and lean the glasses against the openings.
If you wish you can adjust the left insert of the 3D MultiFlex tray to make space for taller glasses (see the “Cutlery” chapter, “3D MultiFlex tray” section).

41

Loading the dishwasher
Lowering the spikes On both front right-hand rows of spikes, you can lower every other spike to make it easier to arrange larger crockery, like cereal bowls.
Press the yellow lever downwards , and then lower the dark grey spikes .
Place the bowls vertically in the row of spikes.
42

Loading the dishwasher

Adjusting the upper basket
In order to gain more space for taller pieces of crockery in the lower basket or upper basket, the upper basket can be adjusted on 3 levels with 2 cm between each level. The upper basket can also be set at an angle so that water can run off freely from recesses. Make sure, however, that the basket can slide smoothly in and out of the wash cabinet. Pull out the upper basket.

To raise the upper basket: Lift the basket up until it clicks into
place.
To lower the upper basket: Pull upwards on the levers at either
side of the upper basket. Adjust the basket to the desired
height and then push the levers securely back down into position.
When adjusting the upper basket, make sure that tall plates in the lower basket do not block the middle spray arm.

43

Loading the dishwasher

Lower basket
See the “Loading the dishwasher” chapter, “Loading examples” section for examples of how to load crockery and cutlery.

Loading the MultiComfort zone The rear section of the lower basket is used for washing cups, glasses, plates and pots and pans.

Loading the lower basket Place larger and heavier items such
as plates, serving platters, saucepans, bowls etc., in the lower basket. Glasses, cups and small plates and saucers can also be placed in the lower basket.

Place very large plates in the middle of the lower basket.
Tip: When tilted, plates up to 35 cm in diameter can be accommodated.

44

Loading the dishwasher

Lowering the spikes The rows of spikes at the front are used for loading plates, soup bowls, platters, dessert bowls and saucers. Both right-hand rows of spikes can be lowered to make more room for large items such as pots, pans and serving dishes.

Loading the FlexCare glass holder The silicone elements in the glass holder provide a stable and secure hold for delicate stemware. Stemware such as wine glasses,
champagne flutes and beer glasses can be leaned against the glass rack or suspended from it. The glass rack can be raised to make more room for tall items. You can set the glass holder to two different heights.

Press the yellow lever downwards , and then lower the rows of spikes . Slide the glass holder to the desired height until the catches click into place at the top or the bottom.

45

Loading the dishwasher

Cutlery tray/cutlery basket (depending on model)
See the “Loading the dishwasher” chapter, “Loading examples” section for examples of how to load crockery and cutlery. Load the cutlery into the 3D MultiFlex
tray or into the cutlery basket (depending on the model).
Loading the 3D MultiFlex tray To make unloading easier, cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc. Spoon heads should be placed in contact with at least one of the serrated retainers on the base of the tray to ensure that water runs off them freely.

You can push the left insert to the middle in order to accommodate tall items of crockery and long stemmed glasses in the upper basket (see “Upper basket” ­ Loading the silicone elements of the FlexCare cup rack”). You can put large and long cutlery in the recessed centre part of the tray.
Arrange tall items (such as cake servers) so that they do not block the upper spray arm. You can adjust the height of the righthand insert to create more space in the right-hand part of the tray for larger cutlery items or smaller pieces of crockery.

If spoon handles do not fit between the holders, then lay them the other way round.

Pull the insert inwards by the yellow handle and click it into place in one of the two positions.

46

Loading the cutlery basket

Loading the dishwasher

The cutlery basket can be placed anywhere on the front rows of spikes in the left or right corner of the lower basket. To avoid the risk of injury, knives and
forks should be placed with the handles upwards in the cutlery basket. However, cutlery placed handle down in the cutlery basket will come out cleaner and drier. Place small items of cutlery in the individual slots on three sides of the cutlery basket.

Fit the insert onto the cutlery basket if required.

Loading the cutlery insert for the cutlery basket Use the insert supplied for heavily soiled items of cutlery. As this insert separates the items, they do not overlap and can be more easily accessed by the water jets.

Place cutlery into the insert with the handles facing downwards.
Arrange them evenly along the insert.

47

Loading the dishwasher
Loading examples
Dishwashers with cutlery tray Upper basket
Lower basket
48

Cutlery tray

Loading the dishwasher

Heavily soiled items

49

Loading the dishwasher
Dishwashers with cutlery basket Upper basket
Lower basket
50

Cutlery basket

Loading the dishwasher

Heavily soiled items

51

Detergent

Active ingredients
Damage caused by using unsuit-
able detergents. Detergents that are not suitable for domestic dishwashers can cause damage to the dishwasher or to the load. Only use detergents formulated for domestic dishwashers.
Modern detergents contain various active ingredients, the most important of which are: – Water softening complexing agents
to prevent calcification. – Alkalis to aid removal of dried-on
soiling. – Enzymes to break down starch and
loosen protein. – Oxygen-based bleaching agents to
remove coloured stains (e.g. tea, coffee, tomato sauce). Most dishwasher detergents are mildly alkaline and contain enzymes and oxygen-based bleaching agents.

There are different types of detergent: – Powder and liquid gel detergents.
These detergents allow you to adjust the amount dispensed according to the size of the load and level of soiling. – Tab detergents. These are suitable for most levels of soiling. As well as the usual detergents, combination products are also available. These contain rinse aid and water softener (dishwasher salt). Only use these combination detergents for the water hardness levels recommended by the manufacturer on the packaging. The cleaning and drying performance of these combination detergents can vary greatly.
For optimum cleaning and drying results, use dishwasher detergent and add salt and rinse aid separately.

52

Detergent

Risk of chemical burns from de-
tergent. Dishwasher detergents can cause burning on the skin and in the eyes, nose, mouth and throat. Avoid contact with detergents. Do not inhale powder detergents. Do not swallow dishwasher detergents. Seek medical attention immediately if detergent has been swallowed or inhaled. Keep children away from detergents. Detergent residues could still be present in the dishwasher. Keep children away from the dishwasher when the door is open. Do not fill the detergent dispenser until just before starting the programme and activate the door safety lock (depending on model).

Detergent dispensing
The detergent compartment holds a maximum of 50 ml. There are marks in the detergent compartment to aid with dispensing: 20, 30, max. When the door is opened to a horizontal position, they show the approximate fill level in ml and the maximum fill height. Follow the detergent dosage recom-
mended by the manufacturer on the packaging. Unless directed otherwise, use one detergent tab or add 20 to 30 ml of detergent to the detergent compartment, depending on the degree of soiling of the crockery. Failure to dispense the recommended amount of detergent may impair cleaning results. Some tabs may not dissolve completely when the programme QuickPowerWash is used.

53

Detergent
Adding detergent

The detergent must not cause the detergent compartment lid to get stuck. This can prevent the lid from opening during the programme sequence. Do not overfill the detergent compartment.
Ensure that the detergent packaging is properly closed after use. This prevents the detergent from getting damp and clumping together.

Press the yellow button on the lid of the detergent compartment.
The lid will spring open. The lid will also open at the end of a programme sequence.

You can also apply a small amount of detergent to the inner panel of the door in programmes that have a prewash stage (see “Programme overview”).
Add the detergent to the detergent compartment.
Push the lid shut until you hear it click into place.
54

Operation

Switching on the dishwasher
Make sure the spray arms can rotate freely.
Close the door. Open the stopcock, if it is closed. Press the button. The programme selected will briefly appear in the display and the indicator light for the programme selected will come on. Next, the estimated energy and water consumption may be shown for the chosen programme for several seconds. Then the display will show the estimated duration for the selected programme. The Start indicator light will flash.

Selecting a programme
Choose your programme according to the type of crockery and the degree of soiling. The different programmes and their uses are described under “Programme overview”. Use the programme selection but-
ton to select the programme you want. The indicator light for the programme selected will come on. Further programmes can be selected under . Use the programme selection button to select the option. The first of the further programmes will appear in the display. Use the buttons to select the programme you want from the display. You can now select programme options (see “Programme options”). If any programme options are selected, the appropriate indicator lights will also light up.

55

Operation

Display programme duration
The estimated duration of the selected programme appears on the display before the programme begins. During the programme, the time left until the end of the programme is displayed. Symbols appear to indicate which stage the programme is at:
Pre-wash/Soak Main wash Interim rinse Final rinse Drying End
The displayed duration may vary with the same programme. It is influenced by, for example, the water temperature at each inlet, the reactivation process of the water softener, the detergent type, and the amount of dishes and how soiled they are. When a programme is selected for the first time, the display will show the average programme duration for a cold water inlet. The programme durations shown in the “Programme overview” chapter refer to standard test loads and temperatures. Each time a programme is run, the control-display module calculates the programme duration required according to the temperature of the water taken into the dishwasher and the size of the load.

Starting the programme
Press the Start button. If necessary, confirm the previously displayed message with OK.
The programme starts. The Start indicator light will come on.
During the programme sequence, you can use OK to display the name of the programme that is currently running.
Risk of scalding due to hot wa-
ter. During operation, water in the dishwasher may be very hot. During operation, only open the door with extreme caution.

56

Operation

End of programme
The programme has ended when the display shows the message Finished. In some programmes, if the AutoOpen function is activated, the door will automatically open slightly (see “Settings” chapter, “AutoOpen” section). This improves the drying process. If the Consumption programmable function is switched on, you can now call up the actual energy and water consumption of the programme that has just finished (see “Caring for the environment” chapter, “EcoFeedback consumption indicator” section).

Energy management
To save energy, the dishwasher will switch off automatically 10 minutes after the last time a button is pressed or after the end of a programme. You can switch the dishwasher back on again with the button.
The dishwasher will not switch itself off whilst a programme is running or if there is a fault.

The drying fan may continue to run for a few minutes at the end of the programme.

Risk of damage due to steam.
Steam from the dishwasher could damage the edges of delicate worktops when you open the door at the end of the programme if the fan is no longer running. If you have deactivated the automatic door opening function (see “Settings” chapter, “AutoOpen” section), but would still like to open the door at the end of the programme, then make sure that you open the door fully.

57

Operation

Switching off the dishwasher
The dishwasher can be switched off at any time using the button.
Confirm the query Switch off with OK. Switching the dishwasher off during a programme stops the programme.
You can also do this to stop an ongoing timer.
Risk of damage from leaking wa-
ter. Water leakage can cause damage. If the dishwasher is not going to be used for a longer period of time, e.g. whilst on holiday, the stopcock should be closed as a precaution.

Unloading the dishwasher
Dishes tend to break and chip more easily when they are hot. Allow the dishes to cool until they are comfortable enough to handle before unloading them. If you open the door fully after switching off, the dishes will cool much faster. First unload the lower basket, then
the upper basket and finally the 3D MultiFlex tray (if present). This will prevent water drops from the upper basket and 3D MultiFlex tray from falling onto the dishes in the lower basket.

58

Interrupting a programme
A programme will be interrupted as soon as the door is opened. If the door is closed again, the programme will continue from the point it was at before the door was opened.
Risk of scalding due to hot wa-
ter. During operation, water in the dishwasher may be very hot. During operation, only open the door with extreme caution.

Operation
Cancelling or changing a programme
If a programme is cancelled, important programme stages may be missed. A programme should only be cancelled in the first few minutes of the programme sequence.
If a programme has already started and you wish to cancel it, proceed as follows: Switch the dishwasher off with the
button. Confirm the query Switch off with OK. If you would like to select another programme: Switch the dishwasher on again with
the button. If you have dispensed detergent
manually, check whether the detergent compartment is still closed. If the lid is already open, fill it with detergent again and close the lid. Select the programme you want, and then start it.

59

Options

Timer
You can set the start time of a programme. The programme start time can be delayed for between 30 minutes and 24 hours. With start time delays between 30 minutes and 3 hours, the delay can be set in 30 minute stages. It is set in hours for periods longer than this.
With manual detergent dispensing, the detergent will clump together if the detergent compartment is not dry and this may mean it is not fully rinsed out. When using the timer function, make sure that the detergent compartment is dry before adding detergent. Wipe dry with a cloth first, if necessary. Do not use any liquid cleaning agents. These can leak out.

Activating the timer Switch the dishwasher on with the
button. The Start indicator light will flash. Select the programme you want to
use. Press the Timer button. The most recently set “Start in” time will be shown on the display. The Timer indicator light will light up. Set the required time after which the
programme should start automatically using the buttons. Pressing and holding button or will automatically adjust the time. Confirm with OK. The Start indicator light will come on.

Danger to health due to deter-
gent. To prevent children coming into contact with dishwasher detergent: Do not fill the detergent dispenser until just before starting the programme, i.e. before you activate the timer. Use the safety lock to secure the dishwasher door.

60

Options

After you have activated the timer, all the displays will switch off after a few minutes to save energy. Press the button to switch the display back on again for a few minutes. The time up until the programme starts will show counting down in the display in hours for durations above 10 hours, and in minutes for durations below this. At the end of the delay period, the programme selected begins automatically. The time left will appear in the display and the Timer indicator light will go out.

Starting a programme before the time for the timer has elapsed: A programme can be started before the time for the timer has elapsed. Proceed as follows: Switch the dishwasher off with the
button. Switch the dishwasher on again with
the button. Select the programme you want. Press the Start button. The programme starts. The Start indicator light will come on.

61

Guide for selecting a programme

Crockery

Food deposits

Temperature-sensitive dishes, glasses and plastics

Lightly dried-on normal food deposits

Programme features
Programme with glass care

All normal food deposits

Variable, sensor-controlled programme

Mixed crockery

Lightly dried-on normal food deposits

Short programme taking less than an hour

Standard dried-on normal food deposits

Water and energy saving programme

Pots, pans, everyday crockery and cutlery

Stubborn dried-on, burnt-on food deposits containing starch or protein1

Maximum cleaning performance

No crockery

Residual salt after refilling the salt container

1 Food such as potatoes, pasta, rice or stews can leave starchy deposits. Deposits containing protein can be left by food such as fried meat or fish.

Flushes out salt residues

62

Guide for selecting a programme

Programme2 Gentle 45 °C Auto 45­65 °C
QuickPowerWash 65 °C ECO
Intensive 75 °C

Consumption estimate3
Energy consumption Water consumption Programme duration
Energy consumption Water consumption Programme duration
Energy consumption Water consumption Programme duration
Energy consumption Water consumption Programme duration
Energy consumption Water consumption Programme duration

QuickPowerWash 65 °C + Express

Programme duration 13 minutes, no heating up,
solely for flushing out salt.

2 The programmes can be combined with the “Express” or “IntenseZone” programme options (see “Programme options”). You can also select the “Extra clean”, “Extra dry” and “Second interim rinse” function (if available) (see “Settings”).
3 The estimated values may change due to the selected settings or programme options, or the conditions in which the appliance is being used.

63

Programme overview

Programme

Pre-wash

Programme sequence
Main wash Interim rinse Final rinse

Drying/ AutoOpen

ECO1 Auto 45­65 °C
Intensive 75 °C QuickPowerWash 65 °C Gentle 45 °C PowerWash 60 °C ExtraQuiet 55 °C Maintenance wash

°C

°C

–

54

44

/

Variable programme sequence, sensor-controlled adjustment according to load size and level of soiling

As

45­65

55­70

/

required

75

55­70

/

–

65

65

/

45

55­70

/

60

55­70

/

–

55

55­70

/

–

75

70

/

1 This programme is the most efficient in terms of its combined energy and water consumption for cleaning normally soiled dishes.

64

Electrical energy

Programme overview

Consumption2
Water

Time

Cold water 15 °C kWh
0.74/0.733
0.75­1.054,5

Hot water 60 °C kWh
0.52/0.513
0.45­0.554,5

Litres
8.9 6.0­13.04,5

Cold water 15 °C h:min
3:58/3:583
2:05­3:35

Hot water 60 °C h:min 3:41
1:57­3:21

1.35

0.85

14.0

3:11

3:03

1.20

0.75

10.5

0:58

0:58

0.90

0.40

13.0

2:44

2:28

1.00

0.50

13.0

2:24

2:12

0.95

0.60

9.5

3:59

3:50

1.75

1.00

19.0

2:09

1:47

2 Values for the ECO programme were calculated under standardised testing conditions. Values for the remaining programmes were calculated under comparable testing conditions. In practice, the selected settings, programme options or operating conditions may result in different values.
3 Dishwashers with cutlery tray/cutlery basket
4 Minimum value: half load with light soiling
5 Maximum value: full load with heavy soiling

65

Programme overview

Further programmes
PowerWash 60 °C Programme for cleaning a mixed load with normal household food residues.
ExtraQuiet 55 °C Very quiet programme with longer duration. This programme is suitable for a mixed load with normal household food residues that have dried on slightly.

Maintenance programme The dishwasher wash cabinet is generally self-cleaning. However, if residues or deposits occur, use the Maintenance programme to clean it. The dishwasher must not be loaded for this programme. This programme is designed for cleaning the wash cabinet using care products (dishwasher cleaner/ dishwasher conditioner) (see “Optional accessories” chapter, “Appliance care” section). Follow the instructions on the packaging. When using dishwasher care products, detergent should not be dispensed. For this reason, automatic dispensing (if available) will be deactivated for this programme.

66

Programme options

Selecting programme options
You can use programme options to adjust the programmes. To do this, you can select or deselect the programme options before running the programme. Switch the dishwasher on with the
button. The Start indicator light will flash. Select a different programme as re-
quired. Press the button for the programme
option you want. The indicator light will come on for the relevant button if the programme option is available for the programme selected. If the programme option is not compatible with the selected programme, a message to this effect will appear in the display. In this instance, confirm the message
with OK. Press the Start button to start the
programme. The selected programme option will remain active for that particular programme until the setting is changed (except for the ECO programme).

Express The Express programme option reduces the programme duration. In order to achieve optimum cleaning results, the temperature, and therefore the energy consumption, will increase with this option. The time by which the programme duration is shortened varies according to the selected programme. Selecting the Express programme option may take precedence over other selected options.
When used in combination with the QuickPowerWash programme, the Express programme option results in a rinse designed solely for the purpose of flushing out the chamber to remove salt solution that leaked out after refilling the salt reservoir.
IntenseZone The IntenseZone programme option increases cleaning performance in the lower basket. Energy consumption increases due to the extended wash duration in the lower basket and increased temperature.

67

Cleaning and care

Check the condition of your dishwasher regularly (approx. every 4­6 months). In this way, faults and problems can be avoided.
Damage due to unsuitable clean-
ing agents. All surfaces are susceptible to scratching. Contact with unsuitable cleaning agents can alter or discolour the external surfaces. Only use cleaning agents formulated for use on the relevant surfaces.

Cleaning the wash cabinet
The wash cabinet is largely self-cleaning, provided that the correct amount of detergent is always used. The frequent use of low-temperature wash programmes (< 50 °C) increases the risk of contamination and odours inside the wash cabinet. Run the Intensive 75 °C programme once per month to clean the wash cabinet and prevent odours from developing. However, if residues such as limescale or grease have been deposited, use the Maintenance programme to clean the dishwasher (see “Programme overview ­ Additional programmes “) with dishwasher cleaner (see “Optional accessories ­ Appliance care”). Follow the instructions on the product packaging. Miele cleaning and care products are available to order from the Miele Customer Service Department or from the Miele online shop. Clean the filters in the wash cabinet
regularly.

68

Cleaning and care

Hygiene cycle
If you mainly use low temperature programmes, there is a risk of bacteria and unpleasant odours building up in the wash cabinet. If you repeatedly use low temperature programmes, you should regularly run a high temperature programme. This is to prevent the build-up of residues and odours. You can activate or deactivate a Hygiene info message (see “Settings ­ Hygiene cycle”). If you deactivate this message, run the Intensive 75 °C programme once per month to clean the wash cabinet and prevent odours from developing.

Cleaning the door and the door seal
The door seal and the sides of the dishwasher door cannot be reached and cleaned by the spray arm jets. As a result, mould can develop here. Wipe the door seals regularly with a
damp cloth to remove food deposits. Wipe off any food or drink residues
that may have dripped onto the sides of dishwasher door.
Cleaning the control panel
The control panel should only be wiped with a damp cloth.

69

Cleaning and care

Cleaning the appliance front
Damage due to soiling.
Soiling that is left too long might become impossible to remove and could cause the external surfaces to alter or discolour. It is therefore best to remove any soiling immediately.
Clean the appliance front with a clean soft sponge and a solution of warm water and washing-up liquid. After cleaning, wipe the surfaces dry using a soft cloth. A clean, damp microfibre cloth without detergent can also be used.

To avoid damaging the external surfaces, do not use the following: – Detergents containing soda, ammo-
nia, acids or chlorides – Detergents containing descaling
agents – Abrasive detergents, e.g. scouring
powder, scouring liquid, or pumice stones – Detergents containing solvents – Stainless steel cleaning agents – Dishwasher cleaner – Oven cleaner – Glass cleaning agents – Hard, abrasive brushes or sponges, e.g. pot scourers, brushes or sponges that have been previously used with abrasive cleaning agents – Eraser stain remover blocks – Sharp metal scrapers – Wire wool – Steam cleaners

70

Cleaning and care

Cleaning the spray arms
Particles of food can get stuck in the spray arm nozzles and bearings. The spray arms should therefore be inspected regularly (approx. every 2­ 4 months).
Never run a wash programme without using the spray arms.

Removing the cutlery tray (if present) In order to be able to remove the upper spray, you first have to remove the cutlery tray (if present). Take out the cutlery tray.

Damage due to soiling entering
the circulation system. Without filters, soiling can enter the circulation system and cause a blockage. Do not run a wash programme without the lower spray arm or without the filters. When cleaning the filters and spray arms, make sure that coarse soiling cannot get into the circulation system.
Switch the dishwasher off.

Press the rail safety clips on both sides of the cutlery tray together and remove the safety clips .
Take out the cutlery tray completely.

71

Cleaning and care
Removing the top spray arm

Removing the lower spray arm Remove the lower basket.

Push the upper spray arm upwards to engage the inner ratchet. Then unscrew the spray arm by rotating the screw thread anti-clockwise .
Removing the middle spray arm

Rotate the screw thread of the lower spray arm anti-clockwise and pull the spray arm upwards to remove .
Cleaning the spray arms

Rotate the screw thread of the middle spray arm clockwise and remove the spray arm .

Use a pointed object to push food particles into the spray arm nozzles.
Rinse the spray arm thoroughly under running water.

72

Cleaning and care

Inserting the upper spray arm Refit the upper spray arm and tighten
it by hand.
Inserting the middle spray arm

Rotate the screw thread of the lower spray arm clockwise until the arrow in the viewing window points to the lock symbol .
Make sure the spray arms can rotate freely.
Damage due to soiling entering
the circulation system. The lower spray arm is used to secure the filter combination. Without filters, coarse soiling can enter the circulation system and cause a blockage. Do not run a wash programme without the lower spray arm or without the filters.

Replace the middle spray arm and turn the screw thread anticlockwise until it engages. Make sure that the recesses in the lock line up.
Inserting the lower spray arm Refit the lower spray arm and ensure
that the filter combination lies flat in the base of the wash cabinet.

Inserting the cutlery tray (if present) Slide the cutlery tray back onto the
rails from the front. Replace the safety clips in the rails on
both sides of the cutlery tray.

73

Cleaning and care

Checking the filters in the wash cabinet
The filter combination in the base of the wash cabinet retains coarse soiling from the suds solution. This prevents soiling getting into the circulation system and re-entering the wash cabinet through the spray arms.
Damage due to soiling entering
the circulation system. Without filters, soiling can enter the circulation system and cause a blockage. Do not run a wash programme without the lower spray arm or without the filters. When cleaning the filters and spray arms, make sure that coarse soiling cannot get into the circulation system.

Cleaning the filters
Switch the dishwasher off. Remove the lower spray arm (see
“Cleaning and care” chapter, “Cleaning the spray arms” section). Before removing the filter combination, remove any coarse soiling to prevent it from entering the circulation system.

The filters can become blocked by soiling that collects over time. The level of soiling and the time it takes before the filters need cleaning will vary depending on use. The message Check filters will appear in the display after every 50 programme cycles. Check the filter combination. Clean it, if necessary. Then confirm the message with OK.

Remove the filter combination.

74

Cleaning and care

In order to clean the inside of the filter, pull the microfilter on the plastic ring downwards and away from the filter combination.
Rinse all the parts under running water. If necessary, use a soft cleaning brush to remove soiling.
Insert the microfilter back into the filter combination.
Refit the filter combination so that it lies flat in the base of the wash cabinet.
Refit the lower spray arm to the filter combination using the screw connection.

Rotate the screw connection clockwise until the arrow in the viewing window points to the lock symbol .
Damage due to soiling entering
the circulation system. The lower spray arm is used to secure the filter combination. Without filters, coarse soiling can enter the circulation system and cause a blockage. Do not run a wash programme without the lower spray arm or without the filters.

75

Cleaning and care

Cleaning the water inlet filter
A filter is incorporated in the screw thread to protect the water inlet valve. If the filter is soiled, insufficient water flows into the wash cabinet.

Risk of electric shock from mains
voltage. The plastic housing of the water connection contains an electrical valve. The housing must not be dipped in water.

Disconnect the dishwasher from the mains. To do this, turn off the dishwasher, switch off at the socket and remove the plug.
Close the stopcock. Unscrew the water inlet valve.

Remove the seal from the screw thread.
Using pointed pliers, take hold of the plastic filter slat and remove the filter.
Rinse the filter under running water. Reassemble in reverse order.
Screw the screw thread securely back onto the stopcock. Slowly open the stopcock. If water drips out, tighten the screw thread.

Never forget to put the filter back in place after cleaning.

76

Cleaning and care

Cleaning the drain pump
If water remains in the wash cabinet after the end of a programme, the water has not been pumped away. The drain pump may be blocked by foreign objects. These are easy to remove. Disconnect the dishwasher from the
mains. To do this, turn off the dishwasher, switch off at the socket and withdraw the plug. Take the filter combination out of the wash cabinet (see “Cleaning and care” chapter, “Cleaning the filters”). Scoop the water out of the cabinet using a suitable small container or utensil.

Press the catch of the drain pump cover inwards .
Tip the cover inwards until it is released .
Rinse the cover thoroughly under running water and remove all foreign objects.

77

Cleaning and care

Damage due to incorrect clean-
ing. The components are delicate and can be damaged during cleaning. Take care when cleaning the drain pump.

The drain pump (see arrow) is underneath the cover.
Risk of injury from glass splin-
ters. It is especially difficult to see glass splinters in the drain pump. Take care when cleaning the drain pump.
Carefully remove all foreign objects from the drain pump. Check the drain pump impeller by manually turning it. You will feel a little resistance when you turn the impeller.
Refit the cover by placing it down vertically from above.
Ensure that the catch engages correctly.

78

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it.

This section only lists faults that you can remedy yourself. All other faults are shown in Fault FXX.

Technical problems

Problem The display remains dark and the Start indicator light is not flashing after the dishwasher has been switched on with the button. The button does not respond immediately or only responds once it has been pressed several times.
The dishwasher stops during a programme.

Cause and remedy
The dishwasher is not plugged in. Insert the plug and switch on at the socket.
The mains fuse has tripped. Reset the trip switch in the fuse box or replace the
fuse in the plug (see data plate for minimum fuse rating). If the mains fuse trips again, contact the Miele Customer Service Department.
Energy management: the door was opened or closed shortly before the button was pressed. As a result, the dishwasher was already switched on. The electronic module requires a few seconds to be ready for operation. Wait a few seconds after opening or closing the
door. Then press the button.
The mains fuse has tripped. Reset the trip switch in the fuse box or replace the
fuse in the plug (see data plate for minimum fuse rating). If the mains fuse trips again, contact Miele Service.

79

Problem solving guide

Fault messages
Problem One of the following faults appears in the display: Fault FXX
Waterproof
Fault F78

Cause and remedy
Before rectifying the problem: Switch the dishwasher off.
There may be a technical fault. Switch the dishwasher back on after a few
seconds. Restart the desired programme.
If the fault message appears again, there is a technical fault. Switch the dishwasher off. Close the stopcock. Call Miele Service.
The Waterproof system has reacted. Switch the dishwasher off. Close the stopcock. Call Miele Service.
Circulation pump fault. Switch the dishwasher off. Switch the dishwasher back on. Restart the desired programme.
If the fault message appears again, there is a technical fault. Switch the dishwasher off. Close the stopcock. Call Miele Service.

80

Problem solving guide

Door release

Problem

Cause and remedy

The following fault is in- Before rectifying the problem: dicated via the display: Switch the dishwasher off.

Door fault

The door does not open automatically. There may be a technical fault. Open the door manually (see “Before using for the
first time ­ Opening the door”) and switch the dishwasher back on again. If the same fault message appears again, call the Miele Customer Service Department.

The door locking pins do not retract after the door is opened. There may be a technical fault.
Switch the dishwasher back on. If the same fault message appears again, call the
Miele Customer Service Department.

81

Problem solving guide

Water inlet fault
Problem One of the following messages appears in the display: Open stopcock Water intake
Fault F18

Cause and remedy
The stopcock is closed. Open the stopcock fully. Before rectifying the problem: Switch the dishwasher off. The water inlet is restricted. Open the stopcock fully and start the programme
again. Clean the filter in the water inlet (see “Cleaning
and care” ­ Cleaning the filter in the water inlet”). The water-connection pressure is lower than
50 kPa. Seek professional advice. The on-site connection for the water drainage may be too low and you will need to vent the water drainage (see “Installation ­ Water drainage”). A technical fault has occurred. Switch the dishwasher off. Close the stopcock. Call the Miele Customer Service Department.

82

Problem solving guide

Water drainage fault

Problem The message Drain appears in the display.

Cause and remedy
Before rectifying the problem: Switch the dishwasher off.
Water drainage fault. There might be water in the wash cabinet. Clean the filter combination (see “Cleaning and
care” chapter, “Cleaning the filters” section). Clean the drain pump (see “Cleaning and care”
chapter, “Cleaning the drain pump” section). Remove any kinks or loops in the drain hose.

83

Problem solving guide

General problems with the dishwasher

Problem

Cause and remedy

The indicator lights and The dishwasher has switched off automatically to

the display are dark.

save energy.

Switch the dishwasher on again with the button.

Detergent residue is left The detergent compartment was still damp when de-

in the detergent com- tergent was added.

partment at the end of a Only add the detergent when the detergent com-

programme.

partment is dry.

The detergent compart- Residual detergent is blocking the catch.

ment lid cannot be closed.

Remove the residual detergent.

At the end of a programme there is a film of moisture on the inside of the door and possibly on the interior cabinet walls.

This is part of the normal function of the drying system. The moisture will dissipate after a short while.

Water remains in the Before rectifying the problem:

wash cabinet at the end Switch the dishwasher off.

of a programme.

The filter combination in the wash cabinet is clogged.

Clean the filter combination (see “Cleaning and

care” chapter, “Cleaning the filters” section).

The drain pump is blocked. Clean the drain pump (see “Cleaning and care”
chapter, “Cleaning the drain pump” section).

The drain hose is kinked. Remove any kinks from the drain hose.

Build-up of odours in the wash cabinet

The frequent use of low-temperature wash programmes (< 50 °C) increases the risk of contamination and odours inside the wash cabinet. Regularly run a high-temperature programme. This
is to prevent the build-up of residues and odours.

84

Noises
Problem Knocking noise in the wash cabinet Rattling noise in the wash cabinet
Knocking noise in the water pipes

Problem solving guide
Cause and remedy A spray arm is knocking against a wash item. Carefully open the door and rearrange the wash
items that are obstructing the spray arm. Wash items are insecure in the wash cabinet. Carefully open the door and rearrange the wash
items so that they sit securely. There is a foreign object (e.g. glass shard) in the drain pump. Remove the foreign object from the drain pump
(see “Cleaning and care” chapter, “Cleaning the drain pump” section). This may be caused by the on-site installation or the cross-section of the piping. However, this will not affect the functioning of the dishwasher in any way. If in doubt, contact a suitably qualified plumber.

85

Problem solving guide

Unsatisfactory washing result

Problem The crockery is not clean.
There are smears on glassware and cutlery. There is a bluish sheen on the surface of glassware. The film can be wiped off.

Cause and remedy
The crockery was not loaded correctly. See notes under “Loading the dishwasher” for ex-
amples on how to load crockery and cutlery.
The programme was not powerful enough. Select a more powerful programme (see “Pro-
gramme overview”). Activate the Extra clean function (see “Settings ­
Extra clean”). Activate the “Second interim rinse” function (see
“Settings ­ Second interim rinse”).
Not enough detergent was dispensed. Use more detergent during manual dispensing or
change the detergent you are using. Increase the dispensing quantity during automatic
dispensing (if available) (see “Settings ­ AutoDos”).
Items are blocking the path of the spray arms. Carry out a rotation check and if needed rearrange
the items so that the spray arms can rotate freely.
The filter combination in the wash cabinet is not clean or was incorrectly fitted. This may have caused the spray arm jets to become blocked. Clean and/or fit the filter combination correctly. Clean the spray arm jets if necessary (see “Clean-
ing and care ­ Cleaning the spray arms”).
The rinse aid dosage is set too high. Reduce the dosage (see “Settings” chapter, “Rinse
aid” section).

86

Problem solving guide

Problem The crockery is not dry or cutlery and glasses are flecked.
Glassware has a brown or blue tinge. The film cannot be wiped off. Glassware is dull and discoloured. The film cannot be wiped off. Tea or lipstick stains have not been completely removed.

Cause and remedy
The rinse aid dosage is too low or the rinse aid container is empty. Replenish the rinse aid container, increase the
dosage or change the brand of rinse aid (see “Before using for the first time ­ Rinse aid”).
The crockery was taken out of the wash cabinet too soon. Leave the crockery in longer (see “Operation ­ Un-
loading the dishwasher”).
The duration of the drying phase for the selected programme is not sufficient for the crockery (particularly for plastic crockery). Select the Extra dry function (see “Settings ­ Ex-
tra dry”).
You have used combination products that have insufficient drying performance. Switch to another detergent, or replenish the rinse
aid (see “Before using for the first time ­ Rinse aid”).
Ingredients from the detergent have formed a deposit. Switch to another detergent straight away.
The glassware is not dishwasher-proof. The surface has altered. No remedy.
Purchase glassware that is dishwasher-proof.
The wash temperature of the selected programme was too low. Select a programme with a higher main wash tem-
perature.
The bleaching effect of the detergent used is too low. Switch to another detergent.

87

Problem solving guide

Problem

Cause and remedy

White residue is visible on the crockery. Clouding has occurred on glassware and cutlery. The film can be wiped off.

The rinse aid dosage is set too low. Increase the dispensing quantity (see “Settings ­
Rinse aid”).
There is no salt in the salt reservoir. Fill the salt reservoir (see “Before using for the first
time ­ Dishwasher salt”).

The salt reservoir cap has not been screwed on correctly. Replace the cap, making sure that it screws back
on correctly.

Unsuitable combination detergents were used. Switch to another detergent. If using detergent
tabs or powder detergent, do not choose combination products and ensure you refill the dishwasher salt and rinse aid.

The water softener is programmed to too low a water hardness level. Programme the water softener to a higher water
hardness level (see “Settings ­ Water hardness”).

Too much detergent was dispensed. Reduce the dispensing quantity during automatic
dispensing (if available) (see “Settings ­ AutoDos”). Activate the “Second interim rinse” function (see
“Settings ­ Second interim rinse”).

Not enough combination detergent was dispensed. The water softener performance is not sufficient. Increase the dispensing quantity during automatic
dispensing (if available) (see “Settings ­ AutoDos”). Add more dishwasher salt.

Plastic items are discol- Natural dyes, e.g. from carrots, tomatoes or ketchup

oured.

may be the cause. The amount of detergent used or

its bleaching effect was not sufficient to deal with natural dyes.

Use more detergent (see “Detergent”). Parts that are already discoloured will not revert to

their original colour.

88

Problem solving guide

Problem There are rust stains on cutlery.

Cause and remedy
The affected items are not corrosion-resistant. No remedy.
Purchase cutlery that is dishwasher-safe.
A programme was not run after dishwasher salt was added. Traces of salt have got into the normal wash cycle. Always run the 65 °C QuickPowerWash pro-
gramme with the Express option selected and without any load items in the dishwasher immediately after adding dishwasher salt.
The salt reservoir cap has not been screwed on correctly. Replace the cap, making sure that it screws back
on correctly.

89

Service

Contact in the event of a fault
In the event of any faults which you cannot remedy yourself, please contact your Miele dealer or the Miele Customer Service Department.
You can book a Miele Customer Service Department call-out online at www.miele.com/service. Contact information for the Miele Customer Service Department can be found at the end of this document. Please quote the model identifier and serial number of your appliance (Fabr./ SN/Nr.) when contacting the Miele Customer Service Department. This information can be found on the data plate. Please note that telephone calls may be monitored and recorded for training purposes and that a call-out charge will be applied to service visits where the problem could have been resolved as described in this booklet. The data plate is located on the right side of the door.

EPREL database
From 1 March 2021, information on energy labelling and ecodesign requirements will be available in the European Product Database (EPREL). You can find the product database at the following link https://eprel.ec.europa.eu/. You will be asked to enter the model identifier. The model identifier can be found on the data plate.

X xxxx
Made in xxx

Mat.: xxxxxxxx

AC xxxV xxHz x,x kW xx A

Warranty
For information on the appliance warranty specific to your country please contact Miele. See back cover for address. In the UK, your appliance warranty is valid for 2 years from the date of purchase. However, you must activate your cover by calling 0330 160 6640 or registering online at www.miele.co.uk.

90

Note for test institutes
All information required regarding comparison testing and measuring noise levels is given in the Comparison tests leaflet. Please order the latest version of this leaflet by email from: – testinfo@miele.de Please indicate your postal address, as well as the model and serial number of the dishwasher (see data plate). You can also download the brochure from the Miele website.

Service

91

Optional accessories

Dishwasher detergent, rinse aid and cleaning and care products are available for this dishwasher, as are optional accessories. All the products have been designed for Miele appliances. These and many other products can be ordered from the Miele webshop, the Miele Customer Service Department or your Miele dealer.
Dishwasher detergent, rinse aid and salt
When selecting your Miele dishwasher, you opted for top quality and performance. To achieve optimum results all the time, it is important to use the right dishwasher products. Not all off-theshelf products deliver the same results in all dishwashers. For this reason Miele offers dishwasher products specifically designed for Miele appliances.

Powder detergent – With active oxygen for thorough
cleaning – With enzymes that are effective even
at low temperatures – With glass-protection formula against
corrosion
Rinse aid – For sparkling glasses – Helps crockery to dry – With glass- protection formula against
corrosion – Specially designed cap for precise,
easy dispensing
Dishwasher salt – Prevents limescale on crockery and
in the appliance – Extra coarse-grained

Detergent tabs – Sparkling results even with stubborn
food deposits – Combination product with other func-
tions such as rinse aid, dishwasher salt and glass protection additives – Phoshate free helps protect the environment – No need to unwrap thanks to watersoluble wrapping

92

Appliance care
Miele cleaning and care products provide optimum care for your Miele dishwasher.
Dishwasher cleaner – For use with the Maintenance pro-
gramme without detergent dispensing – Cleans the dishwasher effectively and thoroughly – Removes grease, bacteria, and associated unpleasant odours – Ensures excellent dishwashing results
Descaling agent – Removes heavy limescale deposits – Mild and gentle with natural citric
acid
Conditioner – Removes odours, limescale and light
deposits – Maintains the elasticity and leak
tightness of the seals
Freshener – Neutralises unpleasant odours – Fresh, pleasant fragrance of lime and
green tea – Easy and convenient to attach to the
dishwasher basket – Very economical; lasts for 60 wash
cycles

Optional accessories

93

INSTALLATION

Installation

The Miele Waterproof system
Provided that your dishwasher has been installed correctly, the Miele Waterproof system will protect you from water damage throughout its lifetime.
Water inlet
Health risk due to wash water.
Water in the dishwasher is not drinking water. Do not drink any water from the dishwasher.
Health risk and risk of damage
due to contaminated incoming water. The quality of the incoming water must correspond to the drinking water specification of the country in which the dishwasher is being operated. Connect the dishwasher to a drinking water supply.

The dishwasher may be connected to cold or hot water (up to max. 60 °C) supplies. If energy-saving water heating sources such as solar energy circulation systems are used, we recommend connecting to the hot water supply. This saves both time and electrical energy costs. Hot water is used in all programmes. The SolarSave programme (if available) requires a hot water connection of between a minimum of 45 °C and a maximum of 60 °C (inlet temperature). The higher the water intake temperature, the better the cleaning and drying results. The water inlet hose is approx. 1.5 m long. A 1.5 m long, flexible metal extension hose (tested to 14,000 kPa/140 bar) is available as an optional accessory from Miele specialist dealers or the Miele Customer Service Department. A stopcock with a ¾” threaded union is required for the connection. If a stopcock is not available, only a qualified installer may connect the dishwasher to the drinking water supply. The water connection pressure must be between 50 and 1000 kPa. If the water connection pressure is too high, a pressure reducing valve must be fitted.

94

INSTALLATION

Installation

Risk of damage from leaking wa-
ter. The connection point is subject to mains water pressure. Water leaking from it can cause damage. You should therefore open the stopcock slowly and check for leaks. Correct the position of the seal and screw thread if appropriate.
Regulation in Germany
For the protection of drinking water, the non-return valve supplied with the dishwasher must be installed between the stopcock and the water inlet hose.

Risk of damage due to excessive
pressure. A brief increase in the water pressure can damage components of the dishwasher. This dishwasher must only be operated when it is connected to a fully vented plumbing system.

Screw the non-return valve onto the stopcock.
Screw the water inlet hose onto the thread of the non-return valve.

Risk of electric shock from mains
voltage. There are electrical components in the water inlet hose. The inlet hose must not be shortened or damaged in any way (see illustration).

95

INSTALLATION

Installation

Water drainage
The dishwasher’s drainage system is fitted with a non-return valve, which prevents dirty water from flowing back into the appliance via the drain hose. The dishwasher is supplied with approx. 1.5 m of flexible drain hose with an internal diameter of 22 mm. The drain hose can be extended using a connection piece to attach a further length of hose. The drainage length must not be longer than 4 m and the delivery head no higher than 1 m. If the hose is to be directly fitted to the drainage outlet on site, use the hose clip supplied (see installation plan). The hose can be directed to the left or the right of the appliance. The on-site connector for the drain hose can be adapted to different hose diameters. If the connector extends too far into the drain hose, it must be shortened. Otherwise, the drain hose can become blocked. The drain hose must not be shortened.

Lay the drain hose so that it does not kink and is not being subjected to pressure or tension.
Risk of damage from leaking wa-
ter. Leaking water can cause damage. After commissioning, make sure that the water is not leaking.

96

INSTALLATION
Venting the water drain If the on-site drainage connection is situated lower than the guide path for the lower basket rollers in the open door, the drainage system must be vented. Otherwise, a siphoning effect during a programme can cause the appliance to empty itself of water. Open the dishwasher door fully.

Installation

Remove the lower basket. Insert a screwdriver into the middle
opening of the vent valve in the left wash cabinet wall . Press the screwdriver further into the opening and push it through the membrane behind. The vent opening for the water drain is now open.
97

INSTALLATION

Installation

Electrical connection
The dishwasher is “connector-ready” as standard for connection to an earthed socket. The socket must be easily accessible after the dishwasher has been installed. If that is not possible, ensure that a suitable means of disconnection is provided on the installation side for each pole.
Risk of fire from overheating.
Connecting the dishwasher to a multi-socket adapter or to an extension lead can overload the mains connection cable. For safety reasons, do not use an extension lead or multi-socket adapter.
The electrical installation must comply with VDE 0100 requirements. For safety reasons, we recommend using a type residual current device (RCD) in the assigned electrical installation for connecting the dishwasher. If the mains connection cable is damaged, it must only be replaced with a specific mains connection cable of the same type (available from the Miele Customer Service Department). For safety reasons, such replacement may only be carried out by a qualified specialist or the Miele Customer Service Department.

These operating instructions and the data plate indicate the nominal power consumption and the appropriate fuse rating. Compare this information with the data of the on-site electrical connection. If in any doubt, consult a qualified electrician. Temporary or permanent operation on an autonomous power supply system or a power supply system that is not synchronised with the mains power supply (e.g. island networks, back-up systems) is possible. A prerequisite for operation is that the power supply system complies with the specifications of EN 50160 or an equivalent standard. The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronised with the mains power supply, or these measures must be replaced by equivalent measures in the installation. As described, for example, in the current version of BS OHSAS 18001­2 ISO 45001.

98

Technical data
Dishwasher model Height of freestanding appliance
Height of built-in appliance
Height of building-in niche Width Width of building-in niche Depth of freestanding appliance Depth of built-in appliance Weight Voltage Rated load Fuse rating Test certifications awarded Water pressure
Hot water connection Delivery head Drainage length Mains connection cable Capacity *Depending on model

Technical data

Normal

XXL

84.5 cm

–

(adjustable by

+3.5 cm)

80.5 cm (adjustable by +6.5 cm)

84.5 cm (adjustable by +6.5 cm)

Min. 80.5 cm (+6.5 cm) Min. 84.5 cm (+6.5 cm)

59.8 cm

59.8 cm

60 cm

60 cm

60 cm

–

57 cm

57 cm

Max. 58 kg

Max. 49 kg

See data plate

See data plate

See data plate

See data plate

50­1000 kPa (0.5­10 bar)

50­1000 kPa (0.5­10 bar)

Up to max. 60 °C

Up to max. 60 °C

Max. 1 m

Max. 1 m

Max. 4 m

Max. 4 m

Approx. 1.7 m

Approx. 1.7 m

13/14 place settings 13/14 place settings

99

United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk

Australia

Ireland

Miele Australia Pty. Ltd.

Miele Ireland Ltd.

ACN 005 635 398

2024 Bianconi Avenue

ABN 96 005 635 398

Citywest Business Campus

Level 4, 141 Camberwell Road

Dublin 24

Hawthorn East, VIC 3123

Tel: (01) 461 07 10

Tel: 1300 464 353

Fax: (01) 461 07 97

Internet: www.miele.com.au

E-Mail: info@miele.ie

China Mainland Miele Electrical Appliances Co., Ltd. 1-3 Floor, No. 82 Shi Men Yi Road Jing’ an District 200040 Shanghai, PRC Tel: +86 21 6157 3500 Fax: +86 21 6157 3511 E-mail: info@miele.cn, Internet: www.miele.cn

Internet: www.miele.ie
Malaysia Miele Sdn Bhd Suite 12-2, Level 12 Menara Sapura Kencana Petroleum Solaris Dutamas No. 1 Jalan Dutamas 1 50480 Kuala Lumpur, Malaysia Phone: +603-6209-0288

Hong Kong, China

Fax: +603-6205-3768

Miele (Hong Kong) Ltd. 41/F – 4101, Manhattan Place 23 Wang Tai Road Kowloon Bay, Hong Kong Tel: (852) 2610 1025 Fax: (852) 3579 1404 Email: customerservices@miele.com.hk Website: www.miele.hk

New Zealand Miele New Zealand Limited IRD 98 463 631 8 College Hill Freemans Bay, Auckland 1011 New Zealand Tel: 0800 464 353 Internet: www.miele.co.nz
Singapore

India

Miele Pte. Ltd.

Miele India Pvt. Ltd.

29 Media Circle

1st Floor, Copia Corporate Suites, #11-04 ALICE@Mediapolis

Commercial Plot 9,

Singapore 138565

Mathura Road, Jasola,

sTel: +65 6735 1191

New Delhi – 110025

Fax: +65 6735 1161

E-mail: customercare@miele.in

E-Mail: info@miele.com.sg

Website: www.miele.in

Internet: www.miele.sg

South Africa Miele (Pty) Ltd. 63 Peter Place Bryanston 2194 P.O. Box 69434 Bryanston 2021 Tel: (011) 875 9000 Fax: (011) 875 9035 E-mail: info@miele.co.za Internet: www.miele.co.za
Thailand Miele Appliances Ltd. BHIRAJ TOWER at EmQuartier 43rd Floor Unit 4301-4303 689 Sukhumvit Road North Klongton Sub-District Vadhana District Bangkok 10110, Thailand
United Arab Emirates Miele Appliances Ltd. Showroom 1 Eiffel 1 Building Sheikh Zayed Road, Umm Al Sheif P.O. Box 114782 – Dubai Tel. +971 4 3044 999 Fax. +971 4 3418 852 800-MIELE (64353) E-Mail: info@miele.ae Website: www.miele.ae

Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany

G 7100, G 7102, G 7105, G 7107 en-GB

M.-Nr. 11 834 100 / 02

References

• Welcome to Miele Australia - Immer Besser
• Home
• Service
• Service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>