ATOLL ELECTRONIQUE P50 – P100 Phono Boards Instruction Manual
- June 9, 2024
- ATOLL ELECTRONIQUE
Table of Contents
ATOLL ELECTRONIQUE P50 – P100 Phono Boards
Screw the ground material on the chassis
- The hole is near the AUX input.
- Place a lock washer on either side of the chassis then tighten the nut up with a spanner to ensure good electrical contact.
- Then screw the column with your fingers.
Preparation on main board
- Place the phono stage on the orange connectors of the main board. (Only one way possible).
- Important : the phono input is an AUX input. (Phono on display).
Read User Manual Online (PDF format)
Loading......