Keychron K10 Pro QMK-VIA Wireless Mechanical Keyboard User Guide

K10 Pro QMK-VIA Wireless Mechanical Keyboard User Guide

K10 Pro QMK-VIA Wireless Mechanical Keyboard

If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.

1. Connect Bluetooth Press fn + 1 (for 4 seconds) and pair with device named Keychron Kb Pro.

2. Connect Cable

3. The VIA Key Remapping Software
   Please visit caniusevia.com to download the latest VIA software to remap the keys. If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction. (VIA only works when the keyboard is connected by wire to the computer.)

4. The Layers
   There are four layers of key settings on the keyboard. The layer 0 and layer 1 are for the Mac system.
   The layer 2 and layer 3 are for the Windows system. If your system toggle Is switched to Mac, then the layer 0 will be activated.
   If your system toggle is switched to Windows, then the layer 2 will be activated. Remember that if you are using it in Windows mode, please make changes to the layer 2 instead of the top layer (the layer 0). Thu is a rnmmnn mietake nennle are maklno

5. The Back light

6. Adjust The Back-light Brightness

7. Activate Ski / Cortland
   For Sid on Mac Go to System preferences> Ski > select “Hold Command Spate option. ‘Sid key only works on rnacOS and does not work on 10S. For Cortana on Windows: Select Start > Settings > Cortana and select the shortcut by pressing Windows key + C key. Woks. Carom book awibde Ice win:loss10rd *ate 06. Coruna b only &nibble in actin coteries / reran and sighted work everynnere.

8. Warranty
   The keyboard is highly customizable and easy to be rebuilt If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.

9. Watch The Building Tutorial On Our Website
   If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.

10. Factory Reset Troubleshooting? Don’t know what’s going on with the keyboard?

1. Plug in the power cable and switch the keyboard to Cable mode.
2. Factory reset the keyboard by pressing fn +1 + Z (for 4 seconds).
3. Download the right firmware and QMK Toolbox from our website.
4. Switch the keyboard to OFF mode and remove the space bar keycap to find the reset button on the PCB.
5. Hold the reset key first, then switch the keyboard to Cable mode. Release the reset key, and the keyboard will now enter DFU mode.
6. Flash the firmware with the QMK Toolbox.
7. Factory reset the keyboard again by pressing fn +.1 + Z (for 4 seconds). Step by step guide can be found on our website.

Not Happy
  tasupport@keychron.com

Documents / Resources

| Keychron K10 Pro QMK-VIA Wireless Mechanical Keyboard [pdf] User Guide
K10 Pro, QMK-VIA Wireless Mechanical Keyboard, Wireless Mechanical Keyboard, QMK-VIA Mechanical Keyboard, Mechanical Keyboard, Keyboard
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>