Lexmen LIKA Cable Outlet Instruction Manual
- June 12, 2024
- Lexmen
Table of Contents
Lexmen LIKA Cable Outlet
Dimension
SETUP
- Unclip the mask with a screwdriver
- Pull on plate by pushing on the mechanism
- Run the cable through the plate If necessary open the claws by unscrewing the screw
- Insert the wire through the claw then tighten the screw
- Install the mechanism
- Position the plate
- Clip the mask(s)
CAUTION: Cut off electricity beforeany operation
Guarantee 2 years
- This product must be set up in compliance with setupregulations, and preferably by a qualified technician. Incorrect setup and use may result in electric shock or fire hazard.
- Do not open, disassemble, alter, nor modify this appliance
RECYCLING
- This product carries the symbol for disposal of WasteElectrical and Electronic Equipment (WEEE).
- This means that this product must be disposed of in compliance with the European Directive 2012/19/UE for it to be recycled or disassembled in order to minimize its impact on the environment.
- The user may opt for giving his/her product to a competent recycling agency or to the retailer where the new electric or electronic equipment was purchased.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>