STRONG SRT 32HB4003 LED TV User Manual

STRONG SRT 32HB4003 LED TV User Manual

SERVICE CENTER

support_at@strong.tv
support_bg@strong.tv
support_cz@strong.tv
support_de@strong.tv
support_dk@strong.tv
support_es@strong.tv
support_fr@strong.tv
support_hu@strong.tv
support_it@strong.tv
support_nl@strong.tv
support_pl@strong.tv
support_pt@strong.tv
support_sk@strong.tv
support_ua@strong.tv

www.strong.tv

Supplied by STRONG Austria Represented by STRONG Ges.m.b.H.
Teinfaltstraße 8/4.Stock 1010 Vienna, Austria
Email: support_at@strong.tv

Licenses
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTPS://WWW.MPEGLA.COM

This product contains one or more programs protected under international and U.S. copyright laws as unpublished works. They are confidential and proprietary to Dolby Laboratories. Their reproduction or disclosure, in whole or in part, or the production of derivative works therefrom without the express permission of Dolby Laboratories is prohibited. Copyright 2003-2009 by Dolby Laboratories. All rights reserved.

THIS PRODUCT IS SOLD WITH A LIMITED LICENSE AND IS AUTHORIZED TO BE USED ONLY IN CONNECTION WITH HEVC CONTENT THAT MEETS EACH OF THE THREE FOLLOWING QUALIFICATIONS: (1) HEVC CONTENT ONLY FOR PERSONAL USE; (2) HEVC CONTENT THAT IS NOT OFFERED FOR SALE; AND (3) HEVC CONTENT THAT IS CREATED BY THE OWNER OF THE PRODUCT. THIS PRODUCT MAY NOT BE USED IN CONNECTION WITH HEVC ENCODED CONTENT CREATED BY A THIRD PARTY, WHICH THE USER HAS ORDERED OR PURCHASED FROM A THIRD PARTY, UNLESS THE USER IS SEPARATELY GRANTED RIGHTS TO USE THE PRODUCT WITH SUCH CONTENT BY A LICENSED SELLER OF THE CONTENT. YOUR USE OF THIS PRODUCT IN CONNECTION WITH HEVC ENCODED CONTENT IS DEEMED ACCEPTANCE OF THE LIMITED AUTHORITY TO USE AS NOTED ABOVE.

Data Protection: Please be aware that STRONG, its manufacturing partners, the application providers and the providers of the services may collect and use technical data and related information, including but not limited to technical information about this device, system and application software and peripherals. STRONG, its manufacturing partners, the application providers and the providers of the services may use such information to improve its products or to provide services or technologies to you, as long as it is in a form that does not personally identify you.

Additionally, please keep in mind that some services provided – already in the device or installed by you may request a registration for which you have to provide personal data. Besides that, please be aware that some services which are not pre-installed but can be installed may collect personal data even without providing additional warnings and that STRONG cannot be held liable for a possible breach of data protection by services not pre-installed.

SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, STRONG declares that the the devices SRT 32HB4003, SRT 40FB4003 are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.strong.tv/en/doc Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High- Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc in the United States and other countries. Wi-Fi is a registered trademark of Wi-Fi Alliance®. Netflix is a registered trademark of Netflix, Inc. YouTubeTM is a trademark of Google Inc. All product names are trademarks or registered trademarks of their respective owners. © STRONG 2021. All rights reserved.

To obtain the best performance and safety, please read this manual carefully. Please keep this manual for future reference.

1.0 INSTRUCTION

1.1 Safety Instructions

Read all of the instructions before operating the set. Keep these instructions well for later use.

• Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.).

• Please refer to the information on the exterior back enclosure for electrical and safety information before installing or operating the apparatus.

• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

• The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc.

• The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
  such as vases, shall be placed on the apparatus.

• The mark indicates a risk of electric shock. The external wires must be installed by an instructed person or ready-made leads or cords must be used.

• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

• Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent types.

• The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.

• Excessive sound pressure from earphones and headphones can cause hearing loss.

• Listening to music at high volume levels and for extended durations can damage one’s hearing.

• In order to reduce the risk of damage to hearing, one should lower the volume to a safe, comfortable level, and reduce the amount of time listening at high levels.

• The mains plug or appliance coupler is used as disconnect device, it shall remain readily operable. When not in use and during movement, please take care of the power cord set, e.g. tie up the power cord set with cable tie or something like that. It shall be free from sharp edges or similar which can cause abrasion of the power cord set. When put into use again, please make sure the power cord is not damaged. In case of damages, please get the power cord replaced by a similar one with the same specifications. The absence of a light indication on the apparatus does not mean that it is fully disconnected from the mains. To disconnect the apparatus completely, the mains plug must be pulled out.

• Attention should be drawn to environmental aspects of battery disposal.

• No naked flame sources, such as lighted candles, should be placed on the apparatus.

• To prevent the spread of fire, keep candles or other open flames away from this product at all times.

• A USB terminal can provide a maximum of 500 mA.

• Equipment with this symbol is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

Operating Environment

• Do not install this equipment in a confined space such as a bookcase or similar unit.
• Do not use the set near damp, and cold areas, protect the set from overheating.
• Keep away from direct sunlight.
• Do not use the set near dust place.
• Do not attach candle to accessible opening area, to avoid flammable foreign material from entering the TV.

WEEE Directive
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

1.2 Storage

Your device has been carefully checked and packed before shipping. When unpacking it, make sure that all the parts are included and keep the packaging away from children. We recommend that you keep the carton during the warranty period, to keep your device perfectly protected in the event of repair or warranty.

1.3 Accessories

1. 1x installation instructions
2. 1x safety instructions/warranty cards
3. 1x remote control
4. 2x AAA batteries

1.4 Equipment set-up

Fig. 1a Install the display on a solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. This apparatus can be used in tropical and/or moderate climates.

Stand assembly instruction

Fig. 1b
Carefully place the TV with its front side facing down on a cushioned flat surface in order to protect the TV and the TV screen from damage.

Take out the stand and assemble it to the TV.

Fasten the feet to the bottom of the TV using the 4X12PWB (32”), 4X14PM (40”) screws.

Fig. 1c
This user manual provides complete instructions for installing and using this TV. The symbols serve as follows.

WARNING
Indicates warning information.

NOTE
Indicates any other additional important or helpful information.

MENU
Represents a button on the remote control or the TV. (Bold characters)

Move to
Represents a menu item within a window. (Italic characters)

2.0 INSTALLATION

2.1 Default PIN code: 0000

2.2 Front panel/underside

Fig. 2
NOTE: The graphics are for representation only.

1. Power indicator /remote sensor
2. Speakers
3. Buttons: Input source, Menu, V-/V+, CH-/CH+, Standby/ON.
4. Power switch ON/OFF

2.3 Rear panel

NOTE:
The graphics are for representation only.

2.3.1 32 inch

Fig. 3a

1. VIDEO/AUDIO L/R
   Connect AUDIO and VIDEO input signals from a signal source such as DVD.

2. HDMI 2
   Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console.

2.3.2 40 inch

1. SAT IN Connect a satellite dish to the TV for searching programmes.
2. ANT/CABLE IN Connect a terrestrial antenna or cable connection from your provider to the TV for searching programmes.
3. CI+ Connect a Conditional Access Module (CAM).
4. AV IN 3.5 mm female jack entry for composite video and left/right audio connection.
5. HEADPHONES Speakers will be muted when earphone is plugged in and headphone selected.

2.4 Side panel

NOTE: The graphics are for representation only.

2.4.1 32 inch

Fig. 3c

1. HDMI 1 (ARC) Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console or directly to a Digital Amplifier that supports the ARC function. This input is equipped with the ARC (Audio Return Channel) feature to implement audio connections and for a full Dolby audio support.

2. SAT IN Connect a satellite dish to the TV for searching programmes.

3. ANT/CABLE IN Connect a terrestrial antenna or cable connection from your provider to the
   TV for searching programmes.

4. CI+ Connect a Conditional Access Module (CAM).

5. HEADPHONES Speakers will be muted when earphone is plugged in and headphone selected.

6. USB Connect a USB device for playback of multimedia files

7. S/PDIF (coax. output)
   Use an RCA cable to connect your TV to a compatible digital amplifier or Home theatre set.

2.4.2 40 inch

Fig. 3d

1. SCART Connect devices like DVD or VCR using SCART cable
2. HDMI 1 (ARC) Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console or directly to a Digital Amplifier that supports the ARC function. This input is equipped with the ARC (Audio Return Channel) feature to implement audio connections and for a full Dolby audio support.
3. HDMI 2 Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console.
4. VGA Connect a VGA source computers may have
5. USB Connect a USB device for playback of multimedia files
6. S/PDIF (coax. output)
   Use an RCA cable to connect your TV to a compatible digital amplifier or Home theatre set.

2.5 Remote control

Fig. 4

2.6 Installing the batteries

Fig. 5
Place 2x AAA batteries in the battery compartment of the remote control. Make sure to match the polarity markings inside the compartment.

NOTE: Pictures are only for reference. Actual items may differ.

1. Slide the cover horizontally.
2. Put 2x AAA batteries in the compartment and make sure the polarity is correct.
3. Slide horizontally to close the cover.

Precautions for using the battery
Improper using of the battery will cause leakage. Carefully follow these instructions.

1. Please note the batteries’ polarity to avoid short circuit.
2. When the battery’s voltage is insufficient which affect the use range, you should replace it with a new battery. Remove the batteries from the remote control unit if you do not intend to use it for a long time.
3. Do not use different types of batteries (for example Manganese and Alkaline batteries) together.
4. Do not put the battery into fire, and charge or decompose the battery.
5. Please dispose batteries abide by relevant environmental protection regulation.

2.7 Using the remote control

• Use the remote control by pointing it towards the remote sensor. Items between the remote control and the remote sensor could block normal operation.
• Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote control, also do not put the remote control in a high humidity place.
• Do not place the remote control under direct sunlight which will cause deformation of the unit by heat.
• When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If so, please change the lighting or TV’s position, or operate the remote control closer to the remote sensor.

3.0 FIRST TIME INSTALLATION

After all connections have been properly made, switch on your TV. The language selection will appear on screen. Use pq t u to select the OSD Language of your preference. Confirm with OK on your remote control.

The next screen appears with the Mode Selection to select Home Mode or Shop Mode. Press OK and t u to confirm.

Then the next screen appears with the tuner selection. Choose the one you like to use.

Scan type Select which input source you want to use: DVB-S to receive satellite broadcasts (and if you are equipped with a satellite dish), DVB-T to receive terrestrial broadcasts or DVB-C to receive cable broadcasts.

3.1 DVB-S/S2 installation

Satellite Setting

First select the region where you are using the TV. This important to set time zone correct. Use the t upq and confirm with OK.
Press pq to highlight the satellite your dish is aimed at. Confirm with OK to mark the satellite. Use the t upq buttons to change settings for your satellite installation for each specific satellite. The signal quality bar on the bottom of the screen allows you to fine tune the alignment of your antenna for optimum reception. Adjust your antenna for maximum possible signal quality. When the signal cannot be improved anymore, fix the dish on this position and press the BLUE Scan button to continue.

Channel Search
Press pq t u to highlight the options of choice and press OK to start the channel search.

Scan Mode
Choose between Default (recommended), Blind Scan, Network and Preset Channel List.*

Crypted
Select FTA Channels to search Free-To-Air channels only or All Channels to search FTA and Encrypted channels

Service Type
Select DTV to search DTV channels only, RADIO to search radio channels only or All for a complete search.

It is recommended to use the default settings.

3.2 DVB-T/T2 installation

Terrestrial Setting
First select the Tune Type by pressing ◀▶ to select DTV, ATV or DTV+ATV (DTV to search digital broadcasts and ATV to search analogue broadcasts). Press ▼ to continue. Press ◀▶ to select All Channels or FTA Channels. Press ▲▼ ◀▶ to highlight the country that you want to install, then press OK to start searching.

3.3 DVB-C installation

Cable Setting
Press ▲▼ ◀▶ to highlight your settings.

Scan type
You can select Network Scan or Full. (Default Network Scan for quick search advised)

NOTE:
Frequency Network ID Symbol

Full scan will have a duration of approximately 20 minutes, depending on your cable network.
Please enter (with 0 ~ 9) the main frequency used by your provider in KHz. Please enter (with 0 ~ 9) the used Network ID from your provider. Please enter (with 0 ~ 9) the used Symbol from your provider. (Ks/s)

NOTE: Please check the settings for your cable system used by your provider!

Press OK to continue.
Crypted

Select FTA Channels to search Free-To-Air channels only or All Channels to search FTA and encrypted channels

Press ▲▼ ◀▶ to highlight the country that you want to install, then press OK to start searching.

4.0 ELECTRONIC PROGRAMME GUIDE (EPG)

EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and offers
information on broadcasted programmes. You can access it in digital mode by pressing EPG on the remote control. Press EPG to bring up the EPG interface. Use ▲▼ to select a programme. Press EXIT to stop and return to viewing modes.

Then press the COLOUR BUTTONS for entering the required settings.

GREEN Access extra info of programme

YELLOW Open the reminder setting over view

BLUE Set reminder of selected programme.

5.0 MENU SETTINGS

Below items depend if they are available of select input source. Use INPUT to select another source.

5.1 Menu control (DTV mode)

Press MENU to enter the main menu. Press ▲▼ to select an item. Press  ◀▶and OK to select the submenus. Press MENU to exit the item.

5.2 Picture menu

Picture Mode
Select the automatic picture control mode. Available choices are Dynamic, Standard, Mild and User.

Colour Temperature
Select the overall colour tone of the picture. Available choices are Cool, Medium, Warm and User.

Aspect Ratio
Select the aspect ratio (display proportions) according to your video signal type or preference. Available choices are Auto, 4:3,16:9, Zoom1 and Zoom2. Note: Some options may not be available under some sources.

Noise Reduction
Eliminates noise in the picture. Available choices are Off, Low, Middle and High.

In the User mode, settings can be changed for Brightness, Contrast, Colour and Sharpness.

5.2.1 Contrast/Brightness/Colour Tint/Sharpness

If Picture Mode is set to Personal you are able to change the following settings

Press ▲▼to select an option, then press ◀▶ to adjust.

Contrast
Adjust the highlight intensity of the picture, but the shadow of the picture is invariable.

Brightness
Adjust the optical fibre output of the entire picture, it will affect the dark region of the picture.

Colour
Adjust the saturation of the colour based on your own preference.

Tint
No function

Sharpness
Adjust the peaking in the detail of the picture.

5.2.2 Colour Temperature

In this menu you can change the overall colour cast of the picture.

Press ▲▼ to select Colour Temperature, then press OK to enter a sub-menu. Press ▲▼ to select the relevant picture effect (DEFAULT: Cold Normal Warm).

Cold
lncrease the blue tone for the white.

Normal
Increase the neutral colours for the white.

Warm
lncrease the red colour for the white.

5.2.3 Noise Reduction

In this menu you can filter out and reduce the image noise and improve picture quality. Press ▲▼to select Noise Reduction, then press OK to enter a sub-menu.

Off
Select to turn off video noise detection.

Low
Detect and reduce low video noise.

Middle Detect and reduce moderate video noise.
High Detect and reduce enhanced video noise.
Default Set as Default.

5.3 Sound menu

Sound Mode Select your favourite sound mode for each input. Choices are Standard, Music,
Movie, Sports and User.
Bass Adjusts the lower frequency of the sound.
Treble Adjusts the higher frequency of the sound.
Balance Control the sound balance between the right and left loudspeaker (earphone).
Auto Volume Adjust the volume corresponding to the input audio level. Options are On and Off.
Surround Sound Turns on the Sound Retrieval System.
AD Switch Turn on the Audio description, you can activate the setting of AD volume.
When turn on the audio description, a narrator will describe what is happening on the screen for blind or visually impaired viewers. (Only if available in DTV mode.)
S/PDIF Mode If you have connected S/PDIF output to digital home audio system. You can select “Auto” to output Dolby audio automatically. If channel have this audio
channel.

5.4 Channel

Press MENU to display the main menu. Press ◀▶ to select Channel in the main menu. Press ▲▼ to select the option you wish to adjust in the Channel menu.
Press OK to adjust. After finish your adjustment, press OK to save and return to the previous menu. Below items depend if they are available of select input source. Use INPUT to select another source.

5.4.1 Auto Tuning

Press ▲▼ to select Auto Tuning, select the Scan Type and proceed with OK.

5.4.2 Dish Setup

If you use DVB-S/S2 as input source, the Dish Setup menu allow you to set you satellite and belonging settings as DiSEqC port and LNB type. Afterwards you may start the Auto Tuning or Manual Tuning by selecting with EPG button the wanted transponder.

5.4.3 DTV Manual Tuning (in DVB-T mode only)

Search and store programmes manually. Press ▲▼to select DTV Manual Tuning. Then press OK to enter the sub-menu. Press ◀▶ to select a Channel No., and then press OK to start the search. The search stops when a programme is found and this programme will be stored in the current channel position. If you want to stop the search, press MENU.

5.4.4 ATV Manual Tuning (in DVB-C mode only)

First select the source type of ATV. Then in the Channel menu, select ATV Manual Tuning and press OK to access. Highlight and press ▲▼ to select Storage To 1 (maybe other number), Sound System and Channel No.. Then select search and press OK to start the search. Press u for the unit to search towards higher frequency. Press t for the unit to search towards lower frequency. The search stops when a programme
is found and this programme will be stored in the current channel position. If you want to stop the
search, press MENU.

Current CH
Set the channel number

Colour System
Select the colour system (Available: AUTO, PAL, SECAM)

Sound System
Select the Sound system

Fine-Tune
Adjust the frequency of the channel

Search
Start the channel search

5.4.5 Channel extra settings

Programme Edit Edit the programmes. You can press the COLOUR BUTTONS on the remote control to skip programmes, rename and delete programmes or move
programmes, and add programmes to the favourite list by pressing FAV.
Signal Information Showing the information of current DTV channel. Only available with DTV signal.
Cl information Enables the user to watch and change settings of CAM modules and check values from inserted smart card.
Channel list Select which channel list you like to see if you press on LIST button. Select between Main List or Favorite List
Schedule List Press pq in the Channel. Select Schedule List, then press OK to enter the submenu.
Use the COLOUR BUTTONS to modify your settings.
Software Update (USB) Press OK and use t u to select Yes if you want to update the software or No to go back to the main menu. For more information see also chapter 6.2.5.

NOTE:
To modify the order of the channels contained in the channel list do as follow: press Menu and OK to select Program Edit (it is also possible access this option by pressing PROG button on the remote control).

To move a channel, select it by using pq or CH +/- button then press YELLOW button. Now, there are two different ways to move the channel:
Enter the number of the new position by using the 0 ~ 9 buttons on the remote control and confirm with OK or YELLOW. The selected channel will be automatically moved to the new position. Press pq button and move the channel in a position of your choice. Confirm with OK

5.5 Time menu

Press MENU to display the main menu. Press ◀▶ to select TIME in the main menu. Press ▼▲ to do further adjustments. Press OK to return to the previous menu.

Clock The time is automatically obtained from the channel transmission and doesn’t have to be set manually. Should this function not be provided by the broadcaster, it is possible to set it by pressing OK and set date and time by pressing ▲▼◀▶.

Time Zone Press ▲▼◀▶ to select Time Zone.
Sleep Timer Press p q to select Sleep Timer. Available Options: Off, 10 min., 20 min., 30 min., 60 min., 90min., 120 min.,180 min. and 240 min..
Auto Standby This function allows you to set the automatic shutdown of your TV. Choose between 2H, 3H, 4H or Off to disable this function.
OSD Timer This function allows you to choose how long the info banner is displayed. Choose between 5s, 15s or 30s.

5.6 Lock

Press MENU to display the main menu. Press t u to enter the Lock menu settings. Press p q to select the options. The following options are available:

System Lock This option allows you to enable or disable the password protection. Press OK to set this function On or Off.
Set Password The default password is 0000, to customize the password press OK and follow the instruction within the menu.
Channel Lock This option allows you to prevent viewing of one or more channels. Press OK to display the channel list and select with ▲▼ the channel you want to be locked. Press GREEN to lock it. Consider the same procedure to lock other
channels if needed.
Parental Guidance Press OK to enter and set the age for suitable programmes for children, then press ▲▼.

5.7 Setup Menu

Language Select the Menu language of your choice. The default setting is English. Press ▲▼to select the menu language.
Audio Languages Press t u to select Primary for main audio track or Secondary next audio channel if first is not available. Press ▲▼ t u to select your chosen Audio
Language, then press OK.
Subtitle Language Press ▲▼◀▶  to select your chosen Subtitle Language, then press OK
Country This item shows the region you been selected by first time you install the TV.
Restore Factory Default Press ▲▼to select this function, by pressing OK and enter the PIN code. You will reset all the settings contained in the main menu and deleted all installed
channels. TV will go back to First Time Installation See chapter 3.
Version Information Your current software version is displayed.
HDMI CEC See chapter 5.7.1.
Home /Shop Switch between Home modes and Shop modes with default more brightness and Auto standby to off.
USB Clone This option allows you to copy you channel list to USB device as back up.
Insert USB device and select Back up. To load this later back into TV, select “Restore”.

5.7.1 HDMI CEC

CEC Control Press ◀▶ to turn the HDMI CEC On or Off.
Audio Receiver Press ◀▶ to turn the Audio Receiver On or Off.
Device Auto Power Off Press ◀▶ to turn on this feature. When finished turn off your TV. The
connected device will turn off automatically.
TV Auto Power On Press ◀▶ to select this option. When finished, turn on the connected device.
The TV will switch on automatically.
Device List Press OK to open the main menu of device.
Device Menu Access the device menu.

6.0 USB

6.1 Reminder when using the USB player

Some USB storage devices may not be compatible to operate smoothly with this TV.

Back up all of the data in the USB storage device in case data is lost due to an unexpected accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is consumer’s responsibility.

For large file sizes, the loading speed may be slightly longer.
The recognition speed of a USB storage device may depend on each device.

When connecting or disconnecting the USB storage device, make sure the TV is not in USB mode otherwise the USB storage device or the files stored in it may be damaged.

Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only) file system provided with the Windows operating system. In case of a storage device formatted as a different utility programme which is not supported by Windows, it may not be recognized.
When using a USB Hard Disk Drive which is not powered independently, ensure its power does not exceed 500 mA. Otherwise the TV system will change into standby mode, and you must pull out the USB Hard Disk and restart the TV system.

An “Unsupported File” message will be displayed if the file format is unsupported or the file is corrupted.
FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.

This TV may not support some multimedia files changed and upgraded as the change of the encoding format or other technical aspects advances. Please refer to chapter 9. Appendix for a list of supported file formats for USB playback.

6.2 USB menu

Press SOURCE and select USB. You can view movie, music and photo files from your USB storage devices. Connect a USB storage device to the USB input terminal and select the types of media on the home page: Movie, Music, Photo and text. Press OK, the screen will show the connected USB device, press OK again to view the file folders and files. Press ▲▼ or ◀▶ to select a folder, press OK to open the folder and select the files. Highlight the one you want to play or watch or press directly u 2 to start playing directly. Press 3 to stop playing and return to upper lever folder. Continuously press RETURN to go back to upper level folder. Repeat again to select and play another media type.

NOTE: By choosing one of the three media types, for example Movie, the folders inside will display only video files and no other formats.

6.2.1 Play movies

Fig. 6
During playback, press INFO or OK to display/exit the menu bar (Fig. 6). Press the USB control buttons on the remote control to do relevant operations.

Play & Pause/Stop/Prev./Next
Press u 2 to play or pause the playback. Press 3 to stop playing. Press 7 8 to play the previous or the next video file. Press INFO and use t u to highlight the corresponding icon on the control bar, then press OK. The TV will response accordingly.
Fast Reverse/Fast Forward Press and hold 5 6 for seconds to draw the playing progress as your desire,
then press u 2 to start the playing from the new position.
Play Mode Highlight the corresponding icon and press OK to switch to another play mode.
Information Highlight the corresponding icon and press OK to view the information of the playing video.
Aspect Ratio Highlight the button and press OK to select the display mode.

6.2.2 Play music

Fig. 7

Press INFO or OK to display/exit from the menu bar (Fig. 7). Press the USB control buttons on the remote control to do relevant operations.

Play & Pause/Stop/Previous/Next
Press u 2 to play or pause the playback. Press 3 to stop playing. Press 7 8 to play the previous or the next music file. Press t u to highlight the corresponding icon on the control bar, and then press OK. The TV will response accordingly.
Fast Forward/Fast Reverse Press and hold 5 6 for seconds to draw the playing progress as you wish, then press u 2 on the remote control to start playing from the new position.
Repeat Highlight the icon and press OK. You can select 3 different modes: None to disable the function, 1 to repeat one track only and All to repeat the entire list once it is finished.
Information Highlight the icon and press OK to check the information of the playing music.

NOTE:

• If one (or more) file(s) of the play list is selected, the buttons 7 8 will play only selected files.
• This menu only shows supported files.
• Files with other file extensions are not displayed, even if they are saved on the same USB storage device.
• An over-modulated mp3 file may cause some sound distortion during playback.
• This TV supports lyrics display (in English). The maximum number of characters per line is 48.
• The file name of music and lyrics must be the same in order to display lyrics while the music is playing.
• If you want to show the associated lyrics on the screen with the music, you must store these in the same folder using the same file name with “.Irc” file extensions.

6.2.3 Browse photos

Fig. 8
Press during viewing INFO or OK to display/exit from the menu bar (Fig.8). Press the USB control buttons on the remote control to do relevant operations.

Play & Pause/Stop/Previous/Next
Press u 2 to play or pause the playback. Press 3 to stop playing. Press 7 8 to show the previous or the next picture. Press ◀▶ to highlight the icon on the control bar, and then press OK. The TV will response accordingly.
Repeat Highlight the icon and press OK. You can select 3 different modes: None to disable the function, 1 to repeat one track only and All to repeat the entire list once it is finished.
Info Highlight the button and press OK to check the information of the shown photo.
Rotate Highlight the icon in the menu bar and press OK to rotate the picture 90 degrees clockwise or counter clockwise.
Zoom In/Zoom Out Highlight the icon on the menu bar and press OK to zoom in or zoom out of the image.
Move View When the image is magnified, use this function for convenient check.
Highlight this icon, press OK, then press ◀▶▲▼ to move the image.

NOTE: The move function is only available when the image is enlarged.

6.2.4 Browse text documents

Press ◀▶ to select Text in the main menu. Then press ◀▶ to select the drive disk you choose to watch and OK to enter. Select the file you want to display by using ◀▶▲▼ and confirm with OK. Quit step by pressing OK. Press ◀▶ to select return and go back to previous menu.

6.2.5 Software update via USB

From time to time you can check if there is an improved software version available. This can be viewed and downloaded from our website www.strong.tv. Search the model number on our website’s service support section. If there is an improved software version you can download the file and copy it to the root of a USB device. Then press pq button to select Software Update (USB) from the SETUP menu on your TV. Afterwards plug your USB device into the USB slot and press OK to update the respective software. Confirm with Yes using t u. When the update is completed, remove the USB stick, disconnect your device from the main power supply and plug in again.

7.0 TROUBLESHOOTING

Before calling a service technician, review following information for possible causes and solutions for the problem you are experiencing. If the TV does not work properly after checking it, please contact your local service line or STRONG dealer. Alternatively, you can send a support mail via our website www.strong.tv.

NOTE: If the problem persists after these solutions, please contact your local support centre or send a support mail via our website www.strong.tv.

8.0 SPECIFICATIONS

Audio
Audio Output: 8 W + 8 W
Video
Channel coverage: DVB-T2: 174 MHz-230 MHz; 470 MHz-860 MHz
DVB-C: 50-858 MHz
DVB-S2: 950 MHz-2150 MHz
System: DTV: DVB-T2, DVB-S2, DVB-C
ATV: PAL/SECAM (BG/DK/1)
AV: PAL, NTSC

Connectors 32 inch
1x ANT/CABLE IN
1x SAT IN
1x CI+
1x AUDIO L/R IN
1x VIDEO IN
2x HDMI

1x S/PDIF (coax.)
1x USB
1x HEADPHONES
Connectors 40 inch
1x ANT/CABLE IN
1x SAT IN
1x SCART
1x CI+
2x HDMI
1x S/PDIF (coax.)
1x AV IN
1x USB
1x VGA
1x HEADPHONES

General Data

Operating voltage: 100 ~ 240 V AC 50/60 Hz
Power consumption: 32” max. 60 W, typ. 35 W 40”: max. 72 W, typ. 52 W
Power consumption in standby: 32”, 40”: <0.5 W
Operating temperature: +5 °C ~ +35 °C
Storage temperature: -15 °C ~ +45 °C
Operating humidity: 20% ~ 80% RH, non-condensing
Storage humidity: 10% ~ 90% RH, non-condensing
Dimensions (WxHxD) in mm: 32”: 735,8 x 204 x 474,2 40”: 901 x 252 x 511,3 32”: 3,6 kg
Net-weight: 40“: 6,4 kg

References

• Home | Strong-eu.com
• Home | Strong-eu.com
• Downloads | Strong-eu.com
• Downloads | Strong-eu.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>