STRONG SRT 24HC3023 24 Inch 60 cm LED TV User Manual
- October 27, 2023
- STRONG
Table of Contents
LED TV with DVB-T2/C/S2
SRT 24HC3023
User Manual
SRT 24HC3023 24 Inch 60 cm LED TV
|
---|---
Licenses
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE
WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS
ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR
WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE
IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY
BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
This product contains one or more programs protected under international and
U.S. copyright laws as unpublished works. They are confidential and
proprietary to Dolby Laboratories. Their reproduction or disclosure, in whole
or in part, or the production of derivative works therefrom without the
express permission of Dolby Laboratories is prohibited. Copyright 2003-2009 by
Dolby Laboratories. All rights reserved.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, STRONG declares that the device SRT 24HC3023 is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.strong.tv/en/doc Subject to
alterations. In consequence of continuous research and development technical
specifications, design and appearance of products may change. Manufactured
under license from Dolby Laboratories. Dolby Audio and the double-D symbol are
trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc in the United States and other
countries. All product names are trademarks or registered trademarks of their
respective owners. © STRONG 2022. All rights reserved.
To obtain the best performance and safety, please read this manual carefully.
Please keep this manual for future reference.
Safety Instructions
Read all of the instructions before operating the set. Keep these instructions well for later use.
-
Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.).
-
Please refer to the information on the exterior back enclosure for electrical and safety information before installing or operating the apparatus.
-
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
-
The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc.
-
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
-
The mark ****indicates a risk of electric shock. The external wires must be installed by an instructed person or ready-made leads or cords must be used.
-
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
-
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent types.
-
The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
-
Excessive sound pressure from earphones and headphones can cause hearing loss.
Listening to music at high volume levels and for extended durations can damage one’s hearing. -
In order to reduce the risk of damage to hearing, one should lower the volume to a safe, comfortable level, and reduce the amount of time listening at high levels.
-
The mains plug or appliance coupler is used as disconnect device, it shall remain readily operable. When not in use and during movement, please take care of the power cord set, e.g. tie up the power cord set with cable tie or something like that. It shall be free from sharp edges or similar which can cause abrasion of the power cord set. When put into use again, please make sure the power cord is not damaged. In case of damages, please get the power cord replaced by a similar one with the same specifications. The absence of a light indication on the apparatus does not mean that it is fully disconnected from the mains. To disconnect the apparatus completely, the mains plug must be pulled out.
-
Attention should be drawn to environmental aspects of battery disposal.
-
No naked flame sources, such as lighted candles, should be placed on the apparatus.
-
To prevent the spread of fire, keep candles or other open flames away from this product at all times.
-
A USB terminal can provide a maximum of 500 mA.
-
Equipment with this symbol is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
Operating Environment
- Do not install this equipment in a confined space such as a bookcase or similar unit.
- Do not use the set near damp, and cold areas, protect the set from overheating.
- Keep away from direct sunlight.
- Do not use the set near dust place.
- Do not attach candle to accessible opening area, to avoid flammable foreign material from entering the TV.
WEEE Directive
Correct Disposal of this product. This marking indicates that this product
should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
1.2 Storage
Your device has been carefully checked and packed before shipping. When
unpacking it, make sure that all the parts are included and keep the packaging
away from children. We recommend that you keep the carton during the warranty
period, to keep your device perfectly protected in the event of repair or
warranty.
1.3 Accessories
- 1x installation instructions
- 1x safety instructions/warranty cards
- 1x remote control
- 2x AAA batteries
1.4 Equipment set-up
Fig. 1a
Install the display on a solid horizontal surface such as a table or desk. For
ventilation, leave a space of at least 10 cm free all around the set. To
prevent any fault and unsafe situations, please do not place any objects on
top of the set. This apparatus can be used in tropical and/or moderate
climates. Stand assembly instruction
Fig. 1b
- Carefully place the TV with its front side facing down on a cushioned flat surface in order to protect the TV and the TV screen from damage.
- Take out the 2x feet and assemble them to the TV.
- Fasten the feet to the bottom of the TV using the 4xPA4x14mm screws.
Fig. 1c
This user manual provides complete instructions for installing and using this
TV. The symbols serve as follows.
WARNING Indicates warning information.
NOTE Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the TV. (Bold
characters)
Move to Represents a menu item within a window. (Italic characters)
INSTALLATION
2.1 Default PIN code: 0000
2.2 Front panel/underside
NOTE:
The graphics are for representation only.
- Power indicator /remote sensor
- Speakers
- Buttons: Input source, Menu, V-/V+, CH-/CH+, Standby/ON.
2.3 Rear Panel
NOTE:The graphics are for representation only.
Fig. 3
-
DC INConnect to an outlet.
-
HEADPHONE Speakers will be muted when earphone is plugged in and headphone selected.
-
VGA Connect a VGA source, like computers may have
-
SCART Connect devices like DVD or VCR using SCART cable
-
PC AUDIO Connect to audio output of PC
-
SAT IN Connect a satellite dish to the TV for searching programmes.
-
ANT/CABLE IN Connect a terrestrial antenna or cable connection from your provider to the
TV for searching programmes. -
S/PDIF (coax. output)
Use an RCA cable to connect your TV to a compatible digital amplifier or Home theatre set. -
COMMON INTERFACE (CI+)
Connect a Conditional Access Module (CAM). -
HDMI
-
USB Connect a USB device for playback of multimedia files
-
AV IN3.5 mm female jack entry for composite video and left/right audio
connection. -
YPbPr Connect YPbPr sources.
2.4 Remote control
- Press to turn the TV on or standby.
- Press to mute or restore the volume.
- DTV Press to go back to Digital TV.
- (ASPECT) Change aspect ratio.
- (PICTURE) PIC Change picture mode.
- SOUND Change sound mode
- 0 ~ 9 Choose channel directly.
- DIGIT_IMG Change the maxium input programme digit
- Press to go back to previous viewed channel.
- INFO Display information about the current source.
- FREEZE Press to hold the picture
- TV/R Switch between TV and radio.
- COLOUR BUTTONS Press to execute the prompt function in TV or DTV menu mode.
- SLEEP Select the sleep time, such as 10 min, 20 min etc.
- SOURCE Press to change signal source
- ENTER Confirm the selection.
- Navigate the menu.
- MENU Open the menu options. Step back in some menu options.
- Exit the current menu.
- VOL +/-Adjust the volume up or down.
- (SUB.PAGE) SUB.P Press this button to enter or exit subpage mode (if subpage is available. Press the buttons to select a subpage.
- EPG Press to display the current EPG information in DTV mode.
- CH +/-Change programmes up or down. Big steps in Channel list.
- HOLD Press to hold the teletext page on screen without update and changes. Press again to release the hold state.
- (REVEAL) TIP In teletext mode, press to reveal the hidden information.
- SIZE Enlarge the teletext display. Press this button once to enlarge upper half of the screen. Press this button again to enlarge lower half of the screen. Press this button again to resume to normal screen size.
- INDEX Press this button to display index page.
- Press to play the previous file.
- Press to play the next file.
- TEXTPress to enter or exit the teletext menu.
- FAVPress to view your assigned favourite list or main list channels. Press to cycle through your assigned favourite channels, press OK to confirm.
- AUDIOPress to select available audio languages. Selecting audio description, a narrator will describe what is happening on the screen for blind or visually impaired viewers. Press again to turn it off (depending on broadcast).
33-35. No function
2.5 Installing the batteries
Fig. 5
Place 2x AAA batteries in the battery compartment of the remote control. Make
sure to match the polarity markings inside the compartment.
NOTE : Pictures are only for reference. Actual items may differ.
- Open the cover.
- Put 2x AAA batteries in the compartment and make sure the polarity is correct.
- Close the cover.
Precautions for using the battery
Improper using of the battery will cause leakage. Carefully follow these
instructions.
- Please note the batteries’ polarity to avoid short circuit.
- When the battery’s voltage is insufficient which affect the use range, you should replace it with a new battery. Remove the batteries from the remote control unit if you do not intend to use it for a long time.
- Do not use different types of batteries (for example Manganese and Alkaline batteries) together.
- Do not put the battery into fire, and charge or decompose the battery.
- Please dispose batteries abide by relevant environmental protection regulation.
2.6 Using the remote control
- Use the remote control by pointing it towards the remote sensor. Items between the remote control and the remote sensor could block normal operation.
- Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote control, also do not put the remote control in a high humidity place.
- Do not place the remote control under direct sunlight which will cause deformation of the unit by heat.
- When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If so, please change the lighting or TV’s position, or operate the remote control closer to the remote sensor.
FIRST TIME INSTALLATION
After all connections have been properly made, switch on your TV. The language
selection will appear on screen. Use to select the OSD Language of your
preference. Press and then use to select the country where you will use this
TV. This is important to set settings as time zone and text character
correctly. Press to change Environment from Home to Shop modus to
demonstration TV in shop, otherwise keep as it is.
Press ENTER for next step to go to Tuning setup. In Tuner setup selection you
select which tuner input source you like to use.
Tuner Type If you still have analogue signals in DVB-T or DVB-C. Select here
between options of Digital /+ Analogue systems.
Digital type Satellite to receive satellite broadcasts if you are
equipped with a satellite dish),
DVB-T to receive terrestrial broadcasts with indoor or outdoor antenna.
DVB-C to receive cable broadcasts if you have cable connection from local
provider.
Next step is depending of your choice in Tuner setup.
3.1 DVB-S/S2 installation
Satellite
Press to select Satellite and use to highlight the satellite your dish is
aimed at. Use to highlight the options of choice and press ENTER to start the
channel search.
Scan Mode Choose between Default (recommended), Blind Scan and Network Channel
type
Select Free to search Free-To-Air channels only Free + Scrambled to search FTA
and Encrypted channels or Scramble to search Encrypted channels only.
Service Type Select All to search DTV channels and Radio. Select RADIO to
search radio channels only or DTV for only Digital TV channels.
It is recommended to use the default settings.
3.2 DVB-T/T2 installation
Terrestrial Setting
Press ENTER to start directly searching for digital channels.
Optional you can search also for analogue channels.
Press and select the Tune Type.
By pressing select DTV, ATV or DTV+ATV (DTV to search digital broadcasts and
ATV to search analogue broadcasts).
3.3 DVB-C installation
Cable Setting
Press to highlight your settings.
Scan type You can select Network Scan, Blind scan or Full.
Network IDThe default setting is Auto. To enter your own value press and
enter (with 0 ~ 9) the used Network ID from your provider.
Frequency The default setting is Auto. To enter your own value press and
enter (with 0 ~ 9) the main frequency used by your provider in KHz.
Symbol Rate The default setting is Auto. To enter your own value press
and enter (with 0 ~ 9) the used Symbol Rate from your provider. (Ks/s) most
used values
are 6900 or 6875.
Optional you can search also for analogue channels.
Press select the Tune Type.
By pressing select DTV, ATV or DTV+ATV (DTV to search digital broadcasts and
ATV to search analogue broadcasts).
NOTE: Please, check the settings for your cable system used by your
provider! Full scan will have a duration of approximately 20 minutes,
depending on your cable network.
Press ENTER to start searching for digital channels.
ELECTRONIC PROGRAMME GUIDE (EPG)
EPG stands for Digital Electronic Programme Guide. It is supplied by the
programme providers and offers information on broadcasted programmes. You can
access it in digital mode by pressing EPG on the remote control. Press EPG to
bring up the EPG interface. Use to select a channel.
Press ****to switch to overview from one channel EPG. Use DOWN/UP to select
event where you like to know more details. These details are displayed on top
of this EPG banner or press INFO button for full screen. Press EXIT to stop
and return to viewing modes.
Then press the COLOUR BUTTONS for entering the required settings.
GREEN Set a reminded to event or set even Timer function.
YELLOW Overview of previous day
BLUE Overview of next day
MENU SETTINGS
Below items depend if they are available of select input source. Use SOURCE to
select other source.
Selections are Satellite, DTV, ATV, AV, PC, SCART, Component, HDMI and Media.
5.1 Menu control (DTV mode)
Press MENU to enter the main menu. Press to select an item. Press and ENTER to
select the submenus. Press MENU to exit the item.
5.2 Channel
Press MENU to display the main menu. Press to select Channel in the main menu.
Press to select the option you wish to adjust in the Channel menu.
Press ENTER to adjust. After finish your adjustment, press MENU to save and
return to the previous menu. Below items depend if they are available of
select input source. Use SOURCE to select other source.
5.2.1 Auto Tuning
Press to select Auto Tuning. If the TV use DVB-T or DVB-C tuner please refer
to chapters 3.2 and 3.3; for Satellite (DVB-S) tuner please refer to chapter
3.1.
5.2.2 Dish Setup
If you use Satellite as input source, the Dish Setup menu allow you to set you
satellite and belonging settings as DiSEqC port and LNB type. Afterwards you
may start the Auto Tuning or Manual Tuning by selecting with EPG button the
wanted transponder.
5.2.3 DTV Manual Tuning (in DVB-T mode only)
Search and store programmes manually. Press to select DTV Manual Tuning. Then
press ENTER to enter the sub-menu.
Press to select a Channel No., and then press ENTER to start the search. The
search stops when a programme is found and this programme will be stored in
the current channel position. Press MENU to exit.
5.2.4 ATV Manual Tuning (in DVB-C mode only)
First select the source type of ATV. Then in the Channel menu, select ATV
Manual Tuning and press ENTER to access. Highlight and press to select Storage
To 1 (maybe other number), Sound System and Channel No.. Then select search
and press ENTER to start the search. Press **for the unit to search towards
higher frequency. Press for the unit to search towards lower frequency. The
search stops when a programme is found and this programme will be stored in
the current channel position. If you want to stop the search, press MENU.
Current CH Set the channel number
Colour System Select the colour system (Available: AUTO, PAL, SECAM)
Sound System Fine-Tune
Select the Sound system Search
Adjust the frequency of the channel Start the channel search
5.2.5 Channel extra settings
Programme Edit Edit the programmes. You can press the COLOUR BUTTONS on
the remote control to skip programmes, rename and delete programmes or move
programmes, and add programmes to the favourite list by pressing FAV.
Signal Information Showing the information of current DTV channel. Only
available with DTV signal.
Cl information In the case you use an CI Module for decoding encoded
channels, this menu shows the internal menu of the card and/or CAM.
Logical Channel Numbering LCN This function sort channels automatically to
logic order in DVB-T modus if broadcaster support this function. Press ENTER
to select On or Off.
Channel Type Select FTA to search Free-To-Air channels only, or ALL to
search FTA and Encrypted channels.
NOTE: If Logical Channel Numbering function is set to ON then sorting of
channels is not possible in normally way.
Logical Channel Numbering and Channel Type functions are not available when
Satellite tuner is selected.
5.3 Picture menu
Picture Mode Select one of the automatic picture control mode.
Available choices are Dynamic, Standard, Mild. Select Personal to adjust
Contrast, Brightness, Colour and Sharpness as you like.
Colour Temperature Select the overall colour tone of the picture.
Available choices are Cool, Medium, Warm.
Noise Reduction** Eliminates noise in the picture. Available choices are Off,
Low, Middle, High and Default.
5.3.1 Contrast/Brightness/Colour
If Picture Mode is set to Personal you are able to change the following
settings
Press to select an option, then press to adjust.
Contrast Adjust the highlight intensity of the picture, but the shadow of
the picture is invariable.
Brightness Adjust the optical fiber output of the entire picture, it
will effect the dark region of the picture.
Colour Adjust the saturation of the colour based on your own preference.
Tint No function
5.3.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press to select Colour Temperature, then press ENTER to enter a sub-menu.
Press to select the relevant picture effect (DEFAULT: Cold Normal Warm).
Cold lncrease the blue tone for the white.
Normal Increase the neutral colours for the white.
Warm lncrease the red colour for the white.
5.3.3 Noise Reduction
In this menu you can filter out and reduce the image noise and improve picture
quality. Press to select Noise Reduction, then press ENTER to enter a sub-
menu.
Off Select to turn off video noise detection.
Low Detect and reduce low video noise.
Middle Detect and reduce moderate video noise.
High Detect and reduce enhanced video noise.
Default Set as Default.
5.4 Sound menu
Sound Mode Select your favourite sound mode for each input. Choices are
Standard, Music, Movie, Sports and Personal
Treble Adjusts the higher frequency of the sound.
Bass Adjusts the lower frequency of the sound.
Balance Control the sound balance between the right and left loudspeaker
(earphone).
Auto Volume Adjust the volume corresponding to the input audio level.
Options are On and Off.
S/PDIF Mode If you have connected S/PDIF output to digital home audio
system. You can select Auto to output Dolby audio automatically. If channel
have this audio
channel. Select PCM to output only stereo audio or OFF to switch output off.
AD Switch Turn on the Audio description, you can activate the setting of
AD volume.
When turn on the audio description, a narrator will describe what is happening
on the screen for blind or visually impaired viewers. (Only if available in
DTV mode.)
5.5 Time menu
Press MENU to display the main menu. Press to select TIME in the main menu.
Press to do further adjustments. Press ENTER to confirm or Press MENU to
return.
Clock The time is automatically obtained from the channel transmission
and doesn’t have to be set manually.
Time Zone Press to select Time Zone if you like to change to other zone.
Sleep Timer Press to select Sleep Timer. Available Options: Off, 10 min.,
20 min., 30 min., 60 min., 90min., 120 min.,180 min. and 240 min..
Auto Standby This function allows you to set the automatic shutdown of
your TV. Choose between 3H, 4H, 5H or Off to disable this function.
OSD Timer This function allows you to choose how long the channellist
banner is displayed. Choose between 5s, 15s or 30s.
5.6 Lock
Press MENU to display the main menu. Press to enter the Lock menu settings. To
enable enter the PIN code (default:0000). Press to select the options. The
following options are available:
System Lock This option allows you to enable or disable the password
protection. Press ENTER then Pin code to set this function On or Off.
Set Password The default password is 0000, to customize the password
press ENTER and follow the instruction within the menu.
Channel Lock This option allows you to prevent viewing of one or more
channels. Press ENTER to display the channel list and select with the channel
you want
to be locked. Press GREEN to lock it. Consider the same procedure to lock
other channels if needed.
Parental Guidance Press ENTER to enter and set the age for suitable
programmes for children, then press .
Key Lock This option allows you to Lock the TV buttons. Press to select
Off or On to lock.
5.7 Setup Menu
Language Select the Menu language of your choice. The default setting
is English. Press to select the menu language.
TXT Languages Press to select correct character type belong to language
to display correct the TXT. Selection are: West, East, Russian, Arabic or
Farsi.
Audio Languages Press to select Primary for main audio track or Secondary
next audio channel if first is not available. Press to select your chosen
Audio
Language, then press ENTER.
Subtitle Language Press to select your chosen Subtitle Language, then
pressENTER to select.
Hearing Impaired If you like to have extra subtitles support then select
this function to On.
Aspect Ratio Change in this option the picture format from displayed
video on the screen. PressENTER to select. Auto, 16:9, 4:3, Zoom 1, Zoom 2.
Blue Screen If you select a input with no signal and like to have Blue
colour screen instead black. Select this function to On.
First Time Installation This option allows you to perform the First
Installation again. The complete description is available on chapter 3.
Reset Restore Factory Default Press to select this function, by pressing
ENTER. You will reset all the settings contained in the main menu and deleted
all installed channels. TV will go back to First Time Installation. See
chapter 3.
Software Update (USB) If a new software release for this model is
available on our website and you have copied the unzipped file to an empty USB
device, formatted in FAT32, you can upgrade the system software of this TV.
After successfully update a message appears on screen. Power off by removing
the main power connector. Remove USB device and power ON.
NOTE: NEVER disconnect the USB device from the TV, the TV from the main
or switch OFF power during the update procedure. It can damage your device and
warranty will void!
Environment Home /Shop Switch between Home modes and Shop modes with default
more brightness and Auto standby to off.
HDMI CEC See next chapter 5.7.1.
5.7.1 HDMI CEC
CEC Control Select this item and Press ENTER. Press to turn the HDMI CEC On or Off.
Audio Receiver Press to turn the Audio Receiver On or Off.
Device Auto Power Off Press to turn on this feature. When finished turn
off your TV. The connected device will turn off automatically.
TV Auto Power On Press to select this option. When finished, turn on the
connected device.
The TV will switch on automatically.
Device List Press OK to open the main menu of device.
Device Menu Access the device menu.
MEDIA
6.1 Reminder when using the USB player
- Some USB storage devices may not be compatible to operate smoothly with this TV.
- Back up all of the data in the USB storage device in case data is lost due to an unexpected accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is consumer’s responsibility.
- For large file sizes, the loading speed may be slightly longer.
- The recognition speed of a USB storage device may depend on each device.
- When connecting or disconnecting the USB storage device, make sure the TV is not in USB mode otherwise the USB storage device or the files stored in it may be damaged.
- Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only) file system provided with the Windows operating system. In case of a storage device formatted as a different utility programme which is not supported by Windows, it may not be recognized.
- For Software Updates and Database functions it is recommended to use USB-Sticks (keys) in FAT16 or.32.
- When using a USB Hard Disk Drive which is not powered independently, ensure its power does not exceed 500 mA. Otherwise the TV system will change into standby mode, and you must pull out the USB Hard Disk and restart the TV system.
- An “Unsupported File” message will be displayed if the file format is unsupported or the file is corrupted.
- FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
- This TV may not support some multimedia files changed and upgraded as the change of the encoding format or other technical aspects advances.
- Please refer to chapter 9. Appendix for a list of supported file formats for USB playback.
6.2 USB menu
Press SOURCE and select Media. You can view movie, music and photo files from
your USB storage devices. Connect a USB storage device to the USB input
terminal and select the types of media on the home page: Movie, Music, Photo
and text. Press ENTER, the screen will show the connected USB device, press
ENTER again to view the file folders and files. Press or to select a folder,
press ENTER to open the folder and select the files. Highlight the one you
want to play or watch or press directly **** 2 to start playing directly.
Press 3 to stop playing and return to upper lever folder. Continuously press
RETURN to go back to upper level folder. Repeat again to select and play
another media type.
NOTE: By choosing one of the three media types, for example Movie, the folders inside will display only video files and no other formats.
6.2.1 Play movies
Fig. 6
During playback, press INFO or ENTER to display/exit the menu bar (Fig.
6). Press the USB control buttons on the remote control to **do relevant
operations.
Play & Pause/Stop/Prev./Next Press 2 to play or pause the playback. Press 3 to
stop playing. Press 7 8 to play the previous or the next video file. Press
INFO and use to highlight the corresponding icon on the control bar, then
press ENTER. The TV will response accordingly.
Fast Reverse/Fast Forward Press and hold **for seconds to draw the
playing progress as your desire, then press **to start the playing from the
new position.
Play Mode Highlight the corresponding icon and pressENTER to switch to
another play mode.
Information Highlight the corresponding icon and press ENTER to view the
information of the playing video.
Aspect Ratio** Highlight the button and press ENTER to select the display
mode.
6.2.2 Play music
Fig. 7
Press INFO or ENTER to display/exit from the menu bar (Fig. 7). Press the USB
control buttons on the remote control to do relevant operations.
Play & Pause/Stop/Previous/Next Press to play or pause the playback.
Press 3 to stop playing. Press ****to play the previous or the next music
file. Press to highlight the corresponding icon on the control bar, and then
pressENTER. The TV will response accordingly.
Fast Forward/Fast Reverse Press ****and hold 5 6 for seconds to draw the
playing progress as you wish, then press **on the remote control to start
playing from the new position.
Repeat Highlight the icon and pressENTER. You can select 3 different
modes: None to disable the function, 1 to repeat one track only and All to
repeat the entire list once it is finished.
Information** Highlight the icon and press ENTER to check the information
of the playing music.
NOTE:
- If one (or more) file(s) of the play list is selected, the buttons ****will play only selected files.
- This menu only shows supported files.
- Files with other file extensions are not displayed, even if they are saved on the same USB storage device.
- An over-modulated mp3 file may cause some sound distortion during playback.
- This TV supports lyrics display (in English). The maximum number of characters per line is 48.
- The file name of music and lyrics must be the same in order to display lyrics while the music is playing.
- If you want to show the associated lyrics on the screen with the music, you must store these in the same folder using the same file name with “.Irc” file extensions.
6.2.3 Browse photos
Fig. 8
Press during viewing INFO or ENTER to display/exit from the menu bar
(Fig.8). Press the USB control buttons on the remote control to do
relevant operations.
Play & Pause/Stop/Previous/Next Press ****to play or pause the playback. Press
3 to stop playing. Press to show the previous or the next picture. Press to
highlight the icon on the control bar, and then pressENTER. The TV will
response accordingly.
Repeat Highlight the icon and press ENTER. You can select 3 different
modes: None to disable the function, 1 to repeat one track only and All to
repeat the entire list once it is finished.
Info Highlight the button and press ENTER to check the information of the
shown photo.
Rotate Highlight the icon in the menu bar and press ENTER to rotate the
picture 90 degrees clockwise or counter clockwise.
Zoom In/Zoom Out Highlight the icon on the menu bar and press ENTER to
zoom in or zoom out of the image
Move View When the image is magnified, use this function for convenient
check. Highlight this icon, press ENTER, then press to move the image
NOTE:The move function is only available when the image is enlarged.
6.2.4 Browse text documents
Press to select Text in the main menu. Then press to select the drive disk
you choose to watch and ENTER to enter. Select the file you want to display by
using and confirm with OK. Quit step by pressing ENTER. Press to select return
and go back to previous menu.
6.2.5 Software update via USB
From time to time you can check if there is an improved software version
available. This can be viewed and downloaded from our website www.strong.tv.
Search the model number on our website’s service support section. If there is
an improved software version you can download the file and copy it to the root
of a USB device. Then press button to select Software Update (USB) from the
SETUP menu on your TV. Afterwards plug your USB device into the USB slot and
pressENTER to update the respective software. Confirm with Yes using . When
the update is completed, remove the USB stick, disconnect your device from the
main power supply and plug in again.
**TROUBLESHOOTING
**
There maybe various reasons for abnormal operation of your TV set. Check your
TV set according to the general procedures shown below. Additionally, we
strongly recommend reading the detailed troubleshooting of your TV set in the
full user manual available on our website
www.strong.tv. If your TV set does not work properly
after checking the general and detailed troubleshooting, please contact your
dealer, the local Service Hotline, or send an email to our support via
www.strong.tv. DO NOT try to open or disassemble your
TV set. It may cause a dangerous situation and the warranty will be void.
Problem | Possible cause and solution |
---|---|
The LED/Standby indicator does not light up | 1. Check whether the power |
connector is completely plugged at
the TV and into power socket.
2. Make sure that the switch on multipoint connectors is
switched ON as well.
3. The electrical outlet may be damaged.
4. STBY LED is defective.
No Signal| 1. The TV is not connected to a signal source (DVB-C, DVB-S/S2
or DVB-T/T2) or the antenna (terrestrial or satellite antenna)
is maybe not aligned correctly respectively the according
connection and distribution equipment might show
malfunction, incompatibility or defectives.
2. DVB-T/T2: Active antennas need antenna power switched ON
or external power connected.
Antenna is maybe out of digital signal reception in your area. Check
reference from service providers about coverage.
3. DVB-S/S2: Incorrect values of some tuner parameters (e.g. one
or some channel(s) changed to another transponder or are no
longer emitted).
Incorrect values of LNB parameters.
The picture and sound remain frozen, or macro
blocks or similar distortion are visible on the screen.| DVB-S/S2,DVB-T/T2:
The reception signal is too weak or disturbed by
electromagnetic, high-frequency, or other interference signals. DVB-T/
T2 : Disturbances caused by signal reflections.
DVB-C, DVB-S/S2: The connection cables at the signal source are too
long (too high attenuation).
DVB-T/T2, DVB-S/S2: The antenna is not properly adjusted or got
misaligned after storm etc.
Any other reception or signal related problems| 1. Generally cables might
have loosened. Moisture might
have entered into cables or connectors.There is heavy rain
or heavy storm at present (DVB-S/S2 and -T/T2). Check the cable connections.
DVB-S/S2 and -T/T2: Check all equipment connected between the reception point
and the TV.
2. Wait until heavy rain/thunderstorm passed. If no solution ask a local
satellite specialist for advice.
DVB-S/S2: The satellite dish is NOT aligned to the (correct) satellite(s). Ask
a local satellite specialist for advice.
3. DVB-S/S2: Satellite dish is too small. Trees or buildings are in path. Ask
a local satellite specialist for advice.
4. DVB-S/S2: Signal is too strong, maybe need to be atennuated. Ask a local
satellite specialist for advice.
No colour| 1. Devices are not properly connected (scart, RCA sockets) or
wrong/bad cables are used.
2. Adjust the saturation.
3. Switch TV on another channel. It is possible that the current programme is
broadcast in black and white.
No picture, normal sound| 1. Adjust the brightness and contrast
2. Radio channel is tuned to or the programme is not
transmitting Video signals or another broadcasing
interference/failure.
Normal picture, no sound| 1. Press the volume up button to increase the
volume level.
2. Audio is muted, press ! to restore the sound.
3. If external devices are used to loop the sound through, make
sure to select correct sources and correct sound mode, for
details also check advices in User Manuals from connected
devices
4. Maybe a channel w/o audio is tuned to (demo) or the
programme is not transmitting audio signals or there is some
other transmission interference/failure.
Playback of video is causing picture freeze/macro blocks or similar
distortion,
especially on HD content.| Read/write speed of your USB device could be too
low. Make sure to
use a USB storage device with sufficient speed and space. Pen drives
(USB sticks) may not support sufficient speed.
The remote control does
not work| 1. hange the batteries. If you’re using rechargable ones take care
to use such with low self-discharge
2. The batteries are not installed correctly or the types have been mixed
3. IR Sensor is blocked or maybe interfered from bright light
The TV switches off after a certain time| Switch ON the TV and check settings
for automatic STBY function, by default the TV switches OFF after 4 hours to
fulfil European low power regulations and help you to save energy.
NOTE: If the problem persists after these solutions, please contact your local support centre or send a support mail via our website www.strong.tv
SPECIFICATIONS
Audio
Audio Output: 2 x 3 W
Video
Channel coverage: DVB-T2: 174 MHz-230 MHz; 470 MHz-860 MHz DVB-C: 50-858 MHz
System:DTV: DVB-T2, DVB-S2, DVB-C ATV: PAL/SECAM (BG/DK/1) AV: PAL, NTSC
Connectors
1x ANT/CABLE IN
1x PC audio in
1x SAT IN
1x HDMI
1x SCART
1x USB
1x S/PDIF (coax.)
1x VGA
1x AV IN
1x COMMONINTERFACE (CI+)
1x Mini YPbPr
1x Headphones
General Data
Operating voltage: | 100 ~ 240 V AC 50/60 Hz |
---|---|
Input voltage: | DC 12 V 3 A |
Power consumption: | max. 40 W, typ. 25 W |
Power consumption in standby: | <0.5 W |
Operating temperature: | 25° C |
Storage temperature: | -15 °C ~ +45 °C |
Operating humidity: | 20% ~ 80% RH, non-condensing |
Storage humidity: | 10% ~ 90% RH, non-condensing |
Dimensions (WxHxD) in mm: | 550.7 x 367.3 x 161 |
Net-weight: | 2.66 kg |
SERVICE CENTER
support_bg@strong.tv
+359 32 634451
support_ua@strong.tv
+380 (44) 238 61 50
www.strong.tv
Supplied by STRONG
Austria Represented by STRONG Ges.m.b.H. Franz-Josef s-Kai 1 1010
Vienna. Austria Email: support_at@stronge.tv
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>