NUGU NU110 Candle SE Smart AI Speaker User Manual

NU110 Candle SE Smart AI Speaker User Manual

Components

NUGU candle SE is an Al device that allows users to operate the device with voice commands through Al agents, NUGU and Alen. It has a mood light that can be activated by touching its controls.
Amazon, Alexa and all related marks are trademarks of Amazon.com, Inc. or its affiliates. Alexa is not available in all languages and countries. Alexa features and functionality may vary by location.

Components are subject to change without notice to improve device’s quality or performance.

Power Connection

1. Connect the dedicated adapter to the power port on the back of the War candle SE. During boot up. the white light on top of the device will tum on and rotate clockwise.
2. To boot up the device when the power is off. press and hold the power button (0) on the bottom of the device for about 3 seconds.
3. A white light will blink once and a beep sound will indicate that the boot up is completed and the dote is tuned on.

Be sure to use the power adapter included. Using any other power adapter than the one included in the package may cause a fire After the power Is on. the device can be updated. Walt Mite the update takes place.

installation and Connection of the App

Search for the NUGU for LISA (App) in the app market of your smartphone, and Install it in advance.

• Android OS: Android OS will be proceeded on May Sade soon instead an PPR Neal ch distributed.
• philosophize
• pp Store for War >Select the GET button for titillating.

Poking the &Ace with NUGU for  LISMA App

1. stair WU for US/40.(49). 00 Run NUGU for 1.611A Opp) and give access to your smart ache’s microphone, oration and photos.
2. Follow the on-screen instructions to air it with the device
3. For details on how to pair the NUGU for USMA (App) with the device, check the NUGU far LISMA (App) or our website Maoism).

Configuration and Functions of Buttons

Appearance and Functions

1. Mood Light ON/OFF Button
   • RIM on the mood light (short press). Each press changes the mood of the light’s color.
   • Turn off the light by pressing the button for more than 3 seconds (long press).

2. Mood Light Touch Wheel
   • Turn the wheel clockwise or counterclockwise with your finger to adjust brightness.

3. Voice Recognition Button
   • Voice recognition will start even If you do not call the [name (wake word)] when you press the button.
   • Short press: activates NUGU (Korean) Long press (3 seconds): activates Atexa (English)

4. Volume Control Button
   • Adjusts the volume of the device. (0-16 levels) Press and hold the volume down [ -J button to mute.
   • Now to reconnect when Wi-Fi connection is lost. Press and hold the microphone OFF button [ J for more than 3 seconds. The device will then took for previously connected Wi-Fi and try to connect again.

5. Voice Recognition OFF Button
   • Turn off the voice recognition (short press). When the microphone is off, the red light on the button will blink, and voice will not be recognized.
   • Press the Voice Recognition Off Button for 3 seconds or longer Song press) to start [Wi-Fi Connection Mode] to change the current Wi-Fi network to a new one.
   • Press and hold the Voice Recognition Off Button once more to connect to the previously connected Wi-Fi network in [Wi-Fi connection mode].

6. Power Port • Plug the adapter included to a power supply.

7. Power Button • Turns On and Off the device.
   ■ To reset the device To reset the device, press the power button and the voice recognition button  at the same time for 3 seconds or longer while the device is on.
   ■ Follow the instructions below to setup the device in English To hear the setup process in English press and hold the power button with the plus sign button for 3 seconds or longer while the device is on.

Safety Precautions

Please read the following general precautions carefully to handle and use NUGU candle SE.

1. Use only the provided adapter, and do not use a third party or any other non-standard adapter.
2. Do not let sharp or heavy objects touch the power cable and device connections.
3. Do not use the device near water or in damp places. This may cause an electric shock or fire.
4. Do not expose the NUGU candle SE to high temperatures (above 120°F) or low temperatures (below 14°F). It may cause device failure. In particular, be careful not to put it in places such as inside a car in summer, in direct sunlight, near radiators, fireplaces, electric heaters, or outdoors in winter.
5. Do not use on a slippery floor, on a slope, or on a place that is too high. There may be a risk of injury.
6. Do not use volatile solvents such as alcohol or organic liquids when cleaning the device . It may cause damage to the device. To clean the device, use a soft cloth.
7. In case of damages, such as when the power cable is damaged, liquid has been spilled or an object has been dropped on the device, exposed to rain or moisture, does not operate normally or if it has fallen to the floor, please contact the Help Center (1-800-54762-46). A defective device must be repaired for a normal use since it may be at risk for injuries.
8. Do not modify, disassemble, or repair the device at your own wilL Arbitrary disassembly, alterations, or reassembly using homemade (imitation) parts will void the manufacturer’s warranty and may result in denial of service.
9. If the device emits a burning smell, smoke, or strange sound, stop using it immediately, disconnect the power supply, and contact the Help Center (1-800-54762-46).
10. Be careful not to operate the device with the volume set too high. It may damage your hearing.

Product Specifications

If you encounter any problems while using the product, please contact us using the contact information below.
Website : lisma.io Help Center :1-800-54762-46

FCC Information to User

ens equipment has been tested and found to corrosively with the limits for via’s 8 digital dyke. pursuant to Part 15 of the FCC Rules. These limits are designed to pride reasonable protection anoint Nonunion’ Interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may awe harmful interference to radio communications. Havomw, there is no guarantee that interference will not occur in a particular instigation. If this ornamentation don cause handful interference to radio or television recerCon.utlich ante determined by tuning the equipment off and cm. the use Is encouraged to try to correct the interference by one c the folksinging measures

• Rem-anent Or ablate the receding antenna.
• Increase fete secured*, between the equipment and receiver.
• Connect the equipment into an outdated on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radian technician for help.

Caution Modifications not expressly apt:coned by the party responsible for covariance could void the uses authority to operate the equipment.
FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condition

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including Interference that may cause undesired operation

IMPORTANT NOTE: FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 an from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>