Goodnight 02-2024 Raphael Boxspring Instruction Manual

: June 7, 2024
: Goodnight

Goodnight 02-2024 Raphael Boxspring

INSTRUCTION MANUAL

Important:

Read carefully before assembling/keep and store Instruction for reference

Warning notice Intended use:

Please make sure that you only use your furniture for the purpose it was designed for.

Correct use and regular maintenance are essential for ensuring your furniture remains in working order for the long-term.

Area of use:

The bed you have purchased is suitable for use in general private living quarters. It is not suitable for areas that are wet, outside or used for commercial purposes.

WARNING

Risk of swallowing and choking:

Small parts and packaging material may be swallowed.

WARNING! Bags and film coverings are not toys! Please keep away from babies and small children!
Do not put them over your head, risk of suffocation1

PRECAUTION, risk of injury:

Small children must keep away from the assembly area. They must refrain from climbing up on the furniture.

Age restriction:

Not suitable for children under three.

General information

ATTENTION

Direct sunlight: results in discolouration.

Protective covers:

Protective covers, e.g. felt pads, prevent damage to floors that are easily scratched le.g. parquet).

Raphael Boxspring

Damages during assembly:

These can be avoided if you use a clean soft surface (e.g. carpet).
Only place parts on a soft surface when unpacking or during the assembly Make sure that larger parts cannot tip over

People:
Number of people required for the assembly.

Structure box spring bed system

Raphael Boxspring

1. Dimension
2. Box
3. Mattress
4. Topper
5. Headboard
6. Feets
7. Cover

Raphael Boxspring

Boxspring Fix

Raphael Boxspring

Boxspring Fix

Raphael Boxspring

Foot mounting

Raphael Boxspring

Boxspring with Velcro fastener

a. Once the feet have been mounted, push the two boxes together and fix them with connector.

b. Place the cover on the boxes with the cut-outs of the fittings facing upwards.
Position the corners neatly.

c. Pull the cover down over the boxes. The corners must be neatly positioned.

d. First attach the corners to the box with the Velcro. Do not tighten the cover too much, flush with the Velcro.

e. Fasten the cover in the middle of the box.

f. Finally, fasten the cover evenly from the centre outwards.

Boxspring motor

Raphael Boxspring

1. Boxspring motor

Raphael Boxspring

2. Boxspring motor

Raphael Boxspring

3. Headboard”

Raphael Boxspring

4. Boxspring motor

Raphael Boxspring

5. Boxspring motor

Raphael Boxspring

6. Battery

Raphael Boxspring

Boxspring motor

To connect (pair) the motor with the radio remote control, press the pairing button (A) on the receiver twice until the pairing LED lights up. The pairing process is active for the next 10 seconds.

Press buttons B and C on the radio remote control simultaneously until the pairing LED goes out. This confirms the successful pairing process. This process must only be carried out once during the first start-up. For the For the pairing process, the distance between the radio remote control and the receiver should be less than two metres.

With the buttons D and E you can connect a second motor for parallel use of two lying surfaces using the same method (points 1 & 2). This is necessary if you have a double bed and want to raise or lower both lying surfaces simultaneously (e.g. necessary with a continuous mattress or topper).