COSTWAY SP37607 Foldable 3 Wheel Steel Golf Pull Push Cart Trolley Club User Manual
- June 9, 2024
- COSTWAY
Table of Contents
USER’S MANUAL
SP37607
Golf Push Cart
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
PARTS LIST
A Hand grip
B Scorecard holder
C Handle tube
D Upper bag holder bracket
E Adjustable handle mechanism
F Main upper frame tube
G Connecting rods
H Leg bracket| I Slippery connecting rods
J 2 holes leg frame
k 4 holes leg frame
L Right weight stabilizer
L1 Left weight stabilizer
M Right wheel locking mechanism
M1 Left wheel locking mechanism
N Anti-splay wire
P Main wheel| Q Main lower frame tube
R Lower bag holder bracket
S Front wheel assembly
T Umbrella holder base
U Umbrella holder storage rack
V Umbrella holder
W Join
X Mesh bag
---|---|---
MAINTENANCE
To clean the cart, wipe with a soft, dry cloth. Car polish may be used to maintain finish. Lubricate moving parts every 6 months.
Warning: For your own safety, please read and understand these warnings and keep this user guide for future reference. Always make sure the cart is fully extended and locked before use. Always make sure the cart is folded and locked properly before lifting or transporting. Do not run while using this product. Do not use accessories other than those designed for use with this cart. Keep all packing materials away from children and recycle where possible or where required by law.
UMBRELLA HOLDER
To put in use: Simply attach the umbrella holder onto the cart as in Fig. 2&3.| To store: Attach the umbrella holder to the storage rack on the handle as in Fig. 4&5.
UNFOLDING
Make sure the handle height adjusting knob is fully tightened, then pull the handle and upper bag bracket as shown in Fig.7 to extend the cart.
As shown in Fig 8, press the button and rotate the front wheel 180 degree clockwise so the front wheel is at center of the cart.
Press the button of locking mechanism and insert the wheel axle into the hole to assemble rear wheel as Fig.9.
Press the button and rotate the front wheel 180 degree counterclockwise so the front wheel is on the right of the front wheel fork (when you stand in front of the cart) as Fig11.
Make sure the handle height adjusting knob is fully tightened, slightly lift up the handle as Fig. 12 ,and then press the folding button and push the handle downward as shown in Fig. 13.
Front Wheel Adjustment Mechanism
If the cart veers to the right:
Step 1: Face the front wheel of the cart and use the provided Allen
wrench to loose the two side screws as in Fig.B.
Step 2: Then use the Allen wrench to adjust the front bolt clockwise
until the front wheel is centered as in Fig.C. Then tighten the two side
screws as in Fig.D.
If the cart veers to the left:
Step1: The same as above.
Step 2: Adjust the front bolt counterclockwise until the front wheel is
centered as in Fig.C. Then tighten the two side screws as in Fig.D.
With your inspiring rating, COSTWAY will be more consistent to offer you EASY
SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
office: Fontana