PHILIPS SP010P Essential SmartBright Solar Indoor Suspended Instruction Manual
- June 9, 2024
- Philips
Table of Contents
PHILIPS SP010P Essential SmartBright Solar Indoor Suspended
Mounting instruction
Type Number| Flux(lm)| Battery type| Battery parameter| PV power| PV voltage|
CCT| Ta
---|---|---|---|---|---|---|---
SP010P LED7/765| 700lm| Ternary lithium| 3.7V/1.5Ah*2| 2W| 5.5V| 6500K| 0-45°C
Mode switch
Toggles through the below 5 modes cyclically
- Mode1-Full bright mode, indicatively in 3 Hours on a full battery
- Mode2-Half bright mode, indicatively in 6 Hours on a full battery
- Mode3-Low bright mode, indicatively in 12 Hours on a full battery
- Mode4-SOS fast flashlight output
- Mode5-Light Off
Application Notes
- Please fully charge the product under Sunlight, before first use
- When charging the indicator light is on, when fully charged the indicator light is off
- Try to put solar panel in a sunny place so that the solar panel receive the Sunlight for charging the battery.
- The battery backup will reduce if the ambient temperature is < 0 degree Celsius.
- The light source and battery inside fixture are not replaceable, replace the product when it reaches end of life.
- The product should not be stored for more than 6 months, it may severely affect the life of the battery
PHILIPS
- Slgnlfy (China) Investment Co., Ltd.
- Building No. 9, Lane 888, Tianlin Road, Minhang District, Shanghai, China
- Postal code: 200233
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>