WITHINGS Scanwatch Horizon Smartwatch Installation Guide

June 9, 2024
Withings

WITHINGS Scanwatch Horizon Smartwatch

Scanwatch Horizon Smartwatch

Box contents

  • SCANWATCH
    Scanwatch Horizon Smartwatch

  • **SCANWATCH

**

  • CHARGING CABLE

  • **PIN PUNCH

**

  • HAMMER

  • HOLDER

Quick start

VISIT GO.WITHINGS.COM TO GET THE APP AND FOLLOW THE INSTRUCTIONS. **

**

Product installation

INSTALL YOUR WATCH USING THE APP AND FOLLOW THE GUIDE TO DISCOVER ALL THE FUNCTIONALITIES OF YOUR PRODUCT.
Product installation

How to wear Scan Watch

HE WRISTBAND SHOULD BE COMFORTABLY TIGHT AND WORN 1 CM AWAY FROM THE WRIST BONE
How to wear Scan Watch

How to charge Scan Watch

RECHARGE USING THE CABLE FOUND INSIDE THE BOX. BATTERY LIFE: UP TO 30 DAYS + 20 MORE DAYS IN POWER RESERVE MODE (TIME AND ACTIVITY TRACKING ONLY).
How to charge Scan Watch

Overview

Overview

**A** WRISTBAND
**B**ROTATING BEZEL
C DISPLAY
**D** ACTIVITY DIAL
**E** HEART RATE & SP02 SENSOR

BAND TOOLKIT

Note: This toolkit is only suitable for a metal wristband with a folding clasp.

ADJUST THE WRISTBAND ON YOUR WRIST TO ESTIMATE THE NUMBER OF MESH LINKS TO BE REMOVED. NOTE THAT ONE OF THE LINKS IS SMALLER IN ORDER TO ADJUST THE BRACELET MORE FINELY.

POSITION THE WRISTBAND IN THE HOLDER. THE ARROWS INSIDE THE WRISTBAND SHOULD POINT DOWNWARD.
Band Toolkit

USE THE PIN PUNCH AND THE HAMMER TO PUSH OUT THE PIN THAT SUPPORTS THE MESH YOU WANT TO REMOVE.
Band Toolkit

REMOVE THE SECOND PIN. REMOVE THE MESH. REPEAT IF NECESSARY.

Band Toolkit

REASSEMBLE THE WRISTBAND BY REPLACING ONE OF THE PINS, THEN THE OTHER (IN THE OPPOSITE DIRECTION OF THE ARROWS) WITH THE HAMMER.
Band Toolkit

Warranty

US I Witching’s One Year limited Warranty – Witching’s Scan Watch
Witching’s, 2 rue Maurice Hartmann, 92130 lossy-les-Molineux (“Witching’s”) warrants the Witching’s-branded hardware product (“Witching’s Product”) against defects in materials and workmanship when used normally in accordance with Witching’s published guidelines for a period of ONE (1) YEAR from the date of original retail purchase by the end-user purchaser (“Warranty Period”). Witching’s published guidelines include but are not limited to information contained in technical specifications, safety instructions or quick start guide. Witching’s does not warrant that the operation of the Witching’s Product will be uninterrupted or error-free. Witching’s is not responsible for damage arising from failure to follow instructions relating to the Witching’s Product’s use.

UK I Witching’s 2 Year commercial guarantee Witching’s Scan Watch
Witching’s, 2 rue Maurice Hartmann, 92130 lossy-les-Molineux (“Witching’s”) warrants the Witching’s-branded hardware product (“Witching’s Product”) against defects in materials and workmanship when used normally in accordance with Witching’s’ published guidelines for a period of TWO (2) YEAR from the date of original retail purchase by the end-user purchaser (“guarantee Period”). Witching’s published guidelines include but are not limited to information contained in technical specifications, safety instructions or quick start guide. Witching’s does not warrant that the operation of the Witching’s Product will be uninterrupted or error-free. Witching’s is not responsible for damage arising from failure to follow instructions relating to the Witching’s Product’s use.

Information to users in Canada

This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this equipment not expressly approved by Witching’s may void the FCC authorization to operate this equipment. Radiofrequency radiation exposure information: the radiated output power of the device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized.

Materials

List of materials potentially in contact with the skin during usage: fluoroelastomer, silicon, leather, sapphire glass and stainless steel.

Need help?
withings.com/support/scanwatch
For cleaning instructions, please visit withings.com/support/scanwatch

Witching’s hereby declares that the device Witching’s Scan Watch is in conformity with the essential requirements and other relevant requirements of Directive 2014/53/EU. The declaration of conformity can be found at: withings.com/compliance.

«The crossed out wheeled bin symbol on your product, battery and/or accessories means that the item is classified as electrical and electronic equipment. Such items should not be mixed with general household waste, and must be taken to dedicated collection points at the end of their working life for proper treatment, recovery and recycling. This way you help save valuable resources and promote recycling of materials.»

ScanWatch I Proactive Health Tracking I Vl.l – Jul. 2021
© 2021 Withings. All rights reserved.

WITHINGS-Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals