tp-link KP400 Kasa Smart Outdoor Plug User Guide
- June 9, 2024
- tp-link
Table of Contents
Quick Start Guide
Kasa Smart Outdoor Plug
KP400 Kasa Smart Outdoor Plug
Need some help?
Visitwww.tp-link.com/support
for User Guides, FAQs, Warranty & more
Set Up Your Plug
STEP 1
INSTALL KASA APP
Get the Kasa Smart app from the App Store or Google Play.
STEP 2
ADD TO KASA
Tap the + button in the Kasa Smart app and select Smart Plugs > HomeKit Smart
Plug, 2-Outlet.
STEP 3
INSTALL AND POWER UP
Simply follow the instructions in the Kasa Smart app to complete setup. Note:
Unused sockets should be firmly capped with the included weather-resistant
cover.
Want to Add to Home?
This is a HomeKit-enabled device. You can also add it to the Home app for easy control from your iPhone or iPad.
Before You Start:
- Your phone should be connected to a stable 2.4 GHz Wi-Fi network with internet access.
- HomeKit will be disabled 10 minutes after the plug is powered on. You can unplug and plug it back in to restart the plug, and then try again.
Add to Home
Open the Home app and scan the HomeKit QR code on the plug, then you can add
your plug to Home.
Failed to Add to Home?
- Press and hold the power button on your plug for at least 10 seconds to reset the plug, and restart your phone. Then try again.
- Refer to the troubleshooting guide for detailed instructions:
https://www.tp-link.com/support/faq/3390/
https://www.tp-link.com/support/faq/3390/
© 2022 TP-Link
7106509776 REV1.0.0
Images may differ from actual product.
References
- TP-Link Product Support - Wireless Networking Equipment Support
- How to Troubleshoot when a TP-Link HomeKit-enabled device fails to add to Apple’s Home App
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>