Rebel KOM1017 LED Desk Lamp User Manual

June 9, 2024
Rebel

Rebel LOGO LIGHT
LED DESK LAMP
USER MANUALRebel KOM1017 LED Desk LampModel: KOM1017

SAFETY INSTRUCTIONS

Please read this operation instruction carefully before first use, and keep it for future reference. If there are any doubts concerning correct installation, please consult a qualified specialist.

  1. Protect this device from water, humidity and other liquids. Avoid using/storing it in extreme temperatures.
    Do not expose it to direct sunlight and other sources of heat.

  2. Do not use the device nearby open flames such as candles.

  3. Do not place the device on an unstable surface.

  4. Protect the device from shock.

  5. Product for indoor use only. Do not use outside!

  6. Do not cover the device with clothes, paper or anything flammable.

  7. Do not look directly at LED light beam! Risk of eye damage.

  8. Device may heat up while working. Do not touch!

  9. This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner for all the safety precautions being understood and followed. Children should be supervised to ensure that they do not play with the appliance. Children should not perform cleaning and servicing of the device unsupervised.

  10. Keep the device out of the reach of children.

  11. Prior to each use, inspect for any cracks or damage.

  12. Do not use this device if it has been damaged.

  13. Do not attempt to repair this device yourself. In case of damage, contact authorized service point for check-up or repair.

  14. Always disconnect the device from the power mains before cleaning.

  15. Clean this device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.

PRODUCT DESCRIPTION

Rebel KOM1017 LED Desk Lamp - PRODUCT DESCRIPTION

  1. Light source
  2. Light intensity button
  3. Color temperature button
  4. ON/OFF button
  5. AC adapter
  6. Power socket

Rebel KOM1017 LED Desk Lamp - PRODUCT DESCRIPTION 2

If the table is slant or uneven, in order to make the lamp more stable, it is recommended to pull out the support frame from the back of the base.

OPERATION

Connection: Connect one plug of the included AC adapter to the power socket of the lamp, connect the other plug to the power mains.
Turn the lamp on/off: Press the ON/OFF button.
Set light intensity: Keep tapping the light intensity button to change between three levels. Tap and hold this button for stepless light intensity adjustment.
Set color temperature: Keep tapping the color temperature button to switch between three color temperatures: warm white, natural and cool white.
Memory function: The lamp turns on in the last light intensity and color temperature setting.*

  • When the lamp is disconnected from power mains and then turned on again, those settings will reset to the default which is natural color temperature and the highest light intensity setting.

SPECIFICATION

Touch buttons
3-step/ stepless light intensity adjustment
3-step color temperature adjustment: cool, warm, natural
Memory of last light intensity and color temperature setting
Anti-slip feet

Technical data
Light source: 80 pcs SMD2835
Color temperature: 3000 K/ 4000 K/ 6500 K
Luminous flux: 480 lm/ 750 lm/ 380 lm
Protection class: IP20
Operating temperature: 0°C – +45°C
Lifespan: up to 30 000 hours
Power: 3,6 W/ 5,4 W/ 2,8 W
AC adapter:
Input: 220-240 V~; 50/60 Hz
Output: 12 V / 450 mA
In set: AC adapter
Weight: 1,2 kg
Dimensions: 260 x 131 x 375 mm*

  • Height when arm is tilted at an angle of 90°

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm lo the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.

Made in China for Lechpol Electronics
Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.Rebel
LOGO www.rebelelectro.com

Documents / Resources

| Rebel KOM1017 LED Desk Lamp [pdf] User Manual
KOM1017 LED Desk Lamp, KOM1017, LED Desk Lamp, Desk Lamp, Lamp
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals