70mai Lite 2 Dash Camera User Manual

: June 9, 2024
: 70mai

Table of Contents

70mai Lite 2 Dash Camera
Product Overview
Installation
70mai app
Memory Card
Precautions
Safety Information
Specifications
List of Contents
Warranty Conditions
EU Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

70mai Lite 2 Dash Camera

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz.

Please read this manual carefully before using the product and keep it in a safe place.

Product Overview

$70mai-Lite-2-Dash-Camera-gih- $1$$

Function buttons
Power button
Display screen
Power port
GPS module port
Memory card slot
Speaker
Camera
Mounting slot
Microphone
Indicator light

Note:
Illustrations of the product, accessories and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.

Installation

$70mai-Lite-2-Dash-Camera-gih- $2$$

Installing the electrostatic sticker
Clean your windshield and put the electrostatic sticker on the recommended area as shown in the figure. Make sure you remove air bubbles between the sticker and the glass.
Note: Make sure to stick the electrostatic sticker on a flat and smooth part of the windshield, press it firmly, and avoid sticking it on the edge of the windshield’s film to prevent it from falling down.
Installing the memory card.
Insert the memory card into the card slot with its contacts facing down until you hear a click. The memory card is installed.
Installing the mount.
Attach the mount into the slot and slide up, as shown in the figure on the left. You will hear a snap when it is in place. Make sure the mount is securely installed to the dash cam.
Mounting the dash cam.
Peel off the protective film from the adhesive sticker on the base of the mount, and paste the dash cam onto the electrostatic sticker in the dotted area.
Adjust the dash cam angle.
Turn on the dash cam and adjust the camera angle based on the preview screen to ensure that the camera is facing the front of the vehicle.

70mai app

This product may be used in conjunction with the 70mai app. Please search for “70mai” in the App Store or Google Play or scan the QR code to download and install the app.

Note:
Android 4.4 or iOS 9.0 or above is required to connect to the dash cam’s Wi-Fi hotspot with a mobile phone. $70mai-Lite-2-Dash-Camera-gih- $3$$

Memory Card

A memory card (sold separately) must be installed in the dash cam before use.
The dash cam supports standard MicroSD cards. Please use memory cards with capacity between 16 GB to 128 GB and speed rating of Class 10 or higher.
he default file partition format of the memory card may be inconsistent with the format supported by the dash cam. When inserting the memory card for the first time, please format it in the dash cam before use. Formatting the memory card will delete all files on the card. Please back up important data to another device beforehand.
The memory card may become damaged or deteriorate after repeated cycles of overwriting, and this may affect its ability to save video and image files. If this occurs, immediately replace it with a new memory card.
Please use a high-quality memory card purchased from a reputable vendor. Inferior memory cards may have issues such as the actual reading/writing speeds do not match the stated speeds, and the actual storage capacity does not match the stated storage capacity. We shall not be held liable for lost or damaged videos caused by the use of a low-quality memory card.
In order to avoid reading and writing speeds decreasing after prolonger used, it is recommended to format the memory card in the dash cam every two weeks.
Do not insert or remove a memory card while the dash cam is turned on.

Precautions

Before using this dash cam, please read all the precautions to ensure correct and safe use.

This dash cam is intended to assist drivers with the purpose of recording the environment outside the vehicle. The dash cam does not guarantee the user’s driving safety. We shall not be held liable for any accident, damage, or loss of information caused by operating the dash cam while driving.
Due to differences in vehicle conditions, driving style, driving environment, etc., some functions may not work properly. A power failure, usage in environments outside the normal operating temperature or humidity range, a collision, or a damaged memory card may cause the dash cam to function abnormally. There is no guarantee that this dash cam will function normally under all circumstances. Videos recorded by this dashcam are for reference only.
Please install this dash cam correctly, do not block the driver’s line of sight, nor block the vehicle’s airbag, in order to avoid product failure or physical injury.
Please use the included car charger, power cord, and other accessories in order to avoid product failure due to non-conformance. We shall not be held liable for any loss or damage caused by the use of a non-genuine car charger or power cord.
If the battery becomes deformed, swollen, or starts leaking during use or storage, stop using the dash cam immediately in order to avoid safety issues, and contact after-sales service.
Please keep this dash cam away from any strong magnetic fields, as they may cause damage to the dash cam.
Do not use this dash cam in environments with temperatures over 60 °C or below – 10 °C.
Please only use this dash cam within the scope permitted by law.

Safety Information

Caution:
Battery abuse or mishandling can cause overheating, liquid leakage, or an explosion. To avoid possible injury, do the following:

Do not open, disassemble, or service any battery.
Do not attempt to replace the internal rechargeable lithium batteries.
Do not crush or puncture the battery.
Do not short-circuit the battery or expose it to water or other liquids.
Keep the battery away from children.
Keep the battery away from fire.
Do not leave the battery in an extremely high-temperature environment or an extremely low air-pressure environment.
Stop using the battery if it is damaged, or if you notice any discharge or the build-up of foreign materials on the battery leads. We recommend that the batteries be charged about once every three months to prevent overcharge.
Do not put the battery in trash that is disposed of in landfills. When disposing of the battery, comply with local laws or regulations.

Specifications

ProductDash cam
Model Midrive D10
Resolution 1920×1080
Input5V ⎓ 1.5A
Power supply Car cigarette lighter
Battery type Lithium polymer battery
Battery capacity 500 mAh
Item Dimensions 83 × 60.5 × 37.9 mm

List of Contents

Dashcam
Mount
Power cord
Dual USB car charger
Electrostatic sticker

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptations to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:

Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440

The subject of the declaration:

Title: Dashcam
Model / Type: 70mai Lite 2

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.