Keychron Q0 QMK Custom Number Pad User Manual

: June 9, 2024
: Keychron

Keychron Q0 QMK Custom Number Pad

Keychron Q0 QMK Custom Number Pad

Content Package

1× Fully assembled keyboard
Including…
1× Aluminium case
1× PCB
1× Steel plate
1× Sound absorbing foam
1× Case foam
3 sets of stabilizers
1 set of keycaps (PBT Double-shot)
1 set of Switches (Gateron G Pro)
Cables:
1× Type-C to Type-C cable
1× Type-A to Type-C adapter
Tools:
1× Switch Puller
1× Keycap Puller
1× Screwdriver

Barebone Version

1× Keyboard kit (without keycaps and switches)
Including…
1× Aluminium case
1× PCB
1× Steel plate
1× Sound absorbing foam
1× Case foam
3 sets of stabilizers
Cables:
1× Type-C to Type-C cable
1× Type-A to Type-C adapter
Tools:
1× Switch Puller
1× Keycap Puller
1× Screwdriver

Quick Start Guide

The VIA Key Remapping Software

Please visit caniusevia.com to download the latest VIA software to remap the keys. If the VIA software cannot recognize your keyboard, please reach out to our support to get the instructions.

Warranty

The keyboard is highly customizable and easy to be rebuilt. If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.

Watch the building tutorial

If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself

Factory reset

Try factory reset by pressing ○ + 9 + 1 for four seconds.
Download the right firmware for your keyboard from our website. Remove the power cable from the keyboard.
Remove the “0” and “.” keycaps to find the reset button on the PCB.
Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now will enter DFU mode.
Flash the firmware with the QMK Toolbox.
Factory reset the keyboard again by pressing ○ + 9 + 1 for four seconds.

Specifications

Layout Numpad
Switch type Mechanical
Width 128.8 mm
Length 88.8 mm
Front height (without keycaps) 18.2 mm
Back height (without keycaps) 29.9 mm
Front height (with OSA keycaps installed) 28.8 mm
Back height (with OSA keycaps installed) 39.8 mm
Keyboard feet height 2.4 mm
Angle 5.2

Overview

LAYER 0: This layer will be activated when your keyboard is connected.

Overview

LAYER 1: This layer will be activated when you press the fn/MO(1) key

Overview

Key description

Scr- Decrease screen brightness.
Scr+ Increase screen brightness.
Bright- Backlight decrease.
Bright+ Backlight increase.
Prvs Previous.
Play Play/pause.
Next Next.
Mute Mute.
Vol- Volume decrease.
Vol+ Volume increase.
RGB Toggle Turn backlight on/off.
RGBMd+ RGB mode next.
RGBMd- RGB mode previous.
Hue+ Hue increase.
Hue- Hue decrease.
RGB SPI RGB speed increase.
RGB SPD RGB speed decrease.
MO(1) Layer 1 will be activated when holding this key

Third party input tolls are not compatible with the keyboard.

Due to compatibility, versions, brands and drivers of Windows/macOS, functionalities of third party input tools may be affected while using the keyboard. Please make sure youroperating system and drivers are up to date.

Certain fn keys or multimedia keys do not work under Windows/Android

mode.

Functionalities of certain multimedia keys may be disabled due to compatibility, versions, brands and drivers of Windows/Android OS.

Safety precautions

Keep the product, accessories and packaging parts out of reach of children to prevent any accidents and choking hazards. Always keep the product dry to avoid corrosion. Do not expose the product to extreme temperatures below -10°C or above 50°C to preserve the lifespan of the keyboard.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:

Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440

Subject of the declaration:

Title: Number pad keyboard
Model / Type: Keychron Q0

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

Directive No. 2014/30/EU
Directive No. 2011/65/EU as amended 2015/863/EU

Symbol

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

CUSTOMER SUPPORT

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt
+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz Keychron Logo