marta MT-MX1521A Planetary Mixer User Manual
- June 9, 2024
- MARTA
Table of Contents
marta MT-MX1521A Planetary Mixer
OVERVIEW
- Dough Hook
- Flat Beater
- Egg Whisk
- Scraper
- Stainless steel bowl
- Top cover
- Top seat
- Head up button
- Switch knob
- Base
- Bottom cover
Real set of the appliance could be different from listed in the User manual. Check once buy
IMPORTANT SAFEGUARDS
This User Manual contains information on the use and care of this product. Please read this user manual carefully before using the appliance and save it for future reference.
- Before the first use, check the device specifications and the power supply in your network.
- Use only for domestic purposes according to the instruction manual. It is not intended for industrial use.
- For indoor use only.
- Do not use with damaged cord, plug or other injuries.
- Keep the power cord away from sharp edges and hot surfaces.
- Do not pull the cord. Always take the socket. Don’t reel the cord around the device housing.
- Never attempt to dissemble and repair the item by yourself. If you encounter problems, please contact the nearest customer service center.
- Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the item.
- Always unplug the item and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
- To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
OPERATION
- Place the utensils on a horizontal surface, such as a kitchen cabinet, and make sure the utensils are level.
- Press the head up button, and at the same time rotate the rocker arm up.
- Insert beaters into slots, slightly turning until it locks into proper position.
- Put the food to be processed in the container and install the container on the body. Then turn the container clockwise to lock the container to the body.
- Plug mixer to the power supply socket.
- Install the accessories to be used on the motor shaft ±0 under the rocker arm.
- Press the rocker arm and when you hear a “da” sound, it means that the rocker arm is locked. The lid of the container must be tight after locking, so that the machine can be used.
- Choose one of the 6 speed modes.
- Set speed selector to the “0” position when mixture is smooth. Don’t detach attachments until mixer stopped and unplugged
- Hold the accessory and rotate the accessory clockwise to take it out.
- Turn the bowl of processed food counterclockwise and take it out.
- If you want to scrape the inner wall of the container, you must wait until the attachment comes to a complete stop. You must use a scraper and you must not use your fingers.
ATTENTION: MAX continuous work time is 3 minutes. Make 15-minute breaks while operating mixer.
RECOMMENDED MIXING GUIDE
| SPEED | DESCRIPTION |
|---|---|
| 1-2 | Mixing dry foods |
| 2 | Mixing liquid ingredients, salad dressings |
| 3 | Mixing cake, cookie and bread dough |
| 4 | For creaming butter and sugar, beating uncooked candy, desserts, etc |
| 6 | For beating eggs, cooking icings, whipping potatoes, whipping cream, etc |
CLEANING AND MAINTENANCE
- Unplug the appliance from the power supply.
- Wipe the motor outside with a damp cloth. Do not immerse the appliance in water or other liquids.
- Clean accessories in soapy water and dry. Do not use chemical and abrasive cleaners for cleaning.
- Before storing, dry thoroughly the attachments
- Store the appliance in a cool, dry place.
SPECIFICATION
Power supply| Nominal power| Max power| Net weight / Gross weight| Package
size (L х W х H)
---|---|---|---|---
230 V ~ 50 Hz| 1000 W| 2000 W| 3,35 kg / 3,55 kg| 375 mm x 235 mm x 310 mm
WARRANTY DOES NOT APPLY TO CONSUMABLES (FILTERS, CERAMIC AND NON-STICK
COATING, RUBBER SEALS, ETC.)
Production date is available in the serial number located on the
identification sticker on the gift box and/or on sticker on the device. The
serial number consists of 13 characters, the 4th and 5th characters indicate
the month, the 6th and 7th indicate the year of device production. Producer
may change the complete set, appearance, country of manufacture, warranty and
technical characteristics of the model without notice. Please check when
purchasing device.
Production branch:
COSMOS FAR VIEW INTERNATIONAL LIMITED Room 701, 16 apt, lane 165, Rainbow
North Street, Ningbo, China Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>