YEELIGHT YLCG002 Montion Sensor Closet Light User Manual

June 9, 2024
Yeelight

YLCG002 / YLCG004 / YLCG006
User Manual

Product Description

Note: The illustrations for the product, accessories, user interface and etc. showed in this manual are for reference only.

Setup Instructions

  1. Press the ON/OFF button on the side of the lamp to switch among different modes.

ON/OFF Button Functionalities
Tap the button to switch among ON, OFF, and AUTO modes.
When switching AUTO mode, the function indicator light is flashing in blue colour and turns off in 15 seconds.
Press the button more than 3 seconds to adjust brightness.

Function indicator meaning:
Under AUTO modes, the lamp will automatically turn on when the sensor detects motion and movement in the dark. And the lamp will  automatically turn off in 20 seconds if motion is not detected.

Charging Indicator Functionalities:

  1. The Charging Indicator is in red when the lamp is charging.
  2. The Charging Indicator will turn off when charging is completed.

Note: When the lamp is not illuminated or the indicator does not work at the first use, please charge this device a 5V charger.

Sensor illustration

Take the sensor as the center, the sensor can detect a sector area in 120° degrees with the front sensor distance up to 4 meters and side sensor distance up to 2 meters. The sensor performance varies according to the installation location, ambient temperature, human body shape, and the motion speed.

Installation

  1. Fix two metal plates onto the magnetic area on the back of the lamp.
  2. Tear off the adhesive tapse of the two small metal plates and then paste them on the smooth surface where you want to install the lamp.

Notes:

  1. Make sure that the direction of sensor is to the motion are during installation.
  2. Obstruction in front of the sensor is not allowed.

Specifications

Product name:| Yeelight Motion Sensor Closet Light A20
Yeelight Motion Sensor Closet Light A40
Yeelight Motion Sensor Closet Light A60
---|---
Model| YLCG002 / YLCG004 / YLCG006
Dimensions| 20 x 4.0 x 0.9cm / 40 x 4.0 x 0.9cm / 60 x 4.0 x 0.9cm
Rated power| 1.8W / 2.3W / 2.4W
Batter capacity| 1100mAh / 1500 mAh / 2200mAh
Battery endurance| > 5 hours
Colour temperature| 2700K
Rated input| 5V 0.5A
CRI| > 80
Luminous flux:| 45lm (YLCG002) ; 90lm(YLCG004) ; 135lm (YLCG006)
Charging time| About 3-6 hours
Sensing time| 4-6 months (if the sensor works and lamp turns on the three times per day)
Operating temperature:| -10 ~ +25°C
Operating humidity:| 0%-85%RH
Material of lamp body:| Aluminium alloy + ABS

Safety Precautions

  1. Please ganrantee the voltage before use. Any improper voltage may cause damages to the product and cause safety hazard.
  2. Please install and use the product far away from heat sources, such as heating vents and conditioner vents, and places not exposed to sunlight.
  3. Sensor is not allowed to covered by other objects. Please clean the lamp with a soft cotton cloth and without any corrosive solvents.
  4. This device is for indoor use only. Do not spray water on it or soak it in water to avoid any safety hazard.
  5. Do not use this product as a toy for child play.
  6. Do not disassemble the product. The light-emitting diode may cause damage to your eyes.
  7. This device will generate heat during operation. Please keep proper ventilation.
  8. The light source contained in this luminaire shall only be replaced by the manufacturer or this service agent or a similar qualified person.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

We Qingdao Yeelink Information Technology Co., Lrd., Hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments.

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU).
Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals