YEELIGHT YLTD04YL Smart Serene Desk Lamp Pro User Manual

: June 9, 2024
: Yeelight

Table of Contents

INTRODUCTION
Installation steps
Using method
Safety precautions
Intelligent control
Basic parameter
Product feature
Product performance fault list
Reset to factory setting
Warranty Conditions
EU Declaration of Conformity
- WEEE
CUSTOMER SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**YEELIGHT YLTD04YL Smart Serene Desk Lamp Pro

**

INTRODUCTION

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

Installation steps

Remove the lamp and insert the power line into the power outlet of the lamp body.
Click the power button to turn on the lamp.

Use place: Indoor place such as the study. When bedroom Desk lamp is in normal working position, AB direction is in parallel with desktop edge. The light outlet surface is horizontal, and the vertical distance between the light outlet surface and the desktop is 400mm.

Using method

Click the power button to turn on/off the lamp.
Press and slide the brightness touch bar to adjust the brightness of the light brightness.
Long press the mode button for 2 seconds, with the light breathing at a constant rate twice, and activate the time management mode.
After time management mode is activated, the lamp will be alerted according to the preset “focus/rest” period in the App. When the focus period is over, the light will breathe at a constant rate twice and gradually dim to energy saving mode until the brightness is restored after the rest period.

Safety precautions

Make sure the adapter is the original one before use. If not, it may damage the product and cause security hazard.
The light source of this lamp is irreplaceable. When the light source comes to an end, the entire lamp should be replaced. Please do not disassemble the product.
The lamp will generate heat during working. Please keep the surrounding air convection so as to heat dissipation.
It is strictly forbidden that the water flows into product or the product is working beyond the temperature and humidity.
This lamp has good stability. Please place it stably and do not use it at a inclined position.
Do not put your finger between the lamp arm connecting rod when adjusting the angle, so as not to cause damage to your finger.

Intelligent control

Scan QR code or download the Yeelight Mijia client at APP store.
This product can enter Mijia The intelligent platform is controlled by Mijia APP and is linked with other products of Mijia intelligent platform.

Scan QR code in left side or download the Yeelight mobile client at APP store.
Make sure that when the lamp is powered on, open APP, and set and operate the lamp according to the instruction in APP.

About entered Mijia
“Entered Mijia” means the product can be controlled by Mijia or Xiaoai classmate. Please note that “entered Mijia” only be verified in software level, and Xiaomi and Mijia are not responsible for the manufacturing, standard implementation and quality supervision of the product and the enterprise.

Basic parameter

Product model/type	YLTDO4YL/desk lamp for reading and writing
Working temperature/humidity	-10°C – +35°C / 0%-85%TH
Rated input	220-240V – 50/60Hz 0.45A
Power factor	0.5
Supporting platform	Android 4.4 & iOS 9.0 and higher version
Desk lamp input	12V 1.5A
Rated power	15W /88 ea. x 0.12W/LED module)
Wireless connection	Wi-Fi IEEE 802.11 b/g/n 2.4GHz
Color rendering index	Ra 95
SunLike technology	Supported

Product feature

Reduction of visual fatigue stroboflash
Low blue light hazard
Control of eye using time
Level AA illumination
High colour rendering index
Multi-spindle design
Time management
Low blue light hazard
Wireless connection
Large light-emitting surface
Extra-large angle
Comfortable colour temperature

Product performance fault list

Name	Performance Fault
Main body of desk lamp	Lamp is off

The lamp could not be searched
Function key failure
Rest key failure
Adapter| The lamp cannot be powered normally

Reset to factory setting

Reset hole (Reset) is above the power outlet. Insert the thin object into the reset hole for about 5 seconds after power-on. When the light begins to breathe, release your hand, the lamp will be off after five seconds of breathing. At this moment, the lamp returns to factory setting.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Hereby, Qingdao Yeelink Information Technology Co., Ltd., declares that the radio equipment type YLTD04YL is in compliance wit Directive 2014/53/EU.

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.