YEELIGHT W4L Smart LED Bulb User Manual
- June 9, 2024
- Yeelight
Table of Contents
Yeelight Smart LED Bulb
W4L
User Manual
W4L Smart LED Bulb
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz
Installation and Steps
01 Install the bulb
Install the bulb and turn on the power.
Notes:
- Make sure that the power is off when installing, removing, or examining the light bulb.
- Do not use this product in a lamp with a dimmer (e.g. a desk lamp with a round dimmer switch) to avoid damaging the product.
- Do not use this product in a damp environment.
- Do not use the light bulb in a narrow and ill-ventilated lamp shade as it may cause weak signals or heat dissipation issues.
02 Connect with Mi Home / Xiaomi Home App
This product works with Mi Home / Xiaomi Home app *. Control your device, and
interact it and other smart home devices with Mi Home / Xiaomi Home app.
- Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search “Mi Home / Xiaomi Home” in the app Store to download and install it.
- Open Mi Home / Xiaomi Home app, tap “+” on the upper right, and then follow prompts to add your device.
Note: The version of the app might have been updated, please follow the instructions based on the current app version.
03 Works with Mijia
“Works with Mijia”means that the product can be control by Mi Home app or
xiaoai.
Please note that “Works with Mijia” only performs software-level verification.
Xiaomi and Mijia are not responsible for the manufacturing, standard
implementation and quality supervision of the products and enterprises.
Apple HomeKit Smart Control
- Open the Home app on your iPhone or iPad.
- Tap “Add Accessories” and follow the instructions to scan the QR code either on the back cover of the user manual or on the lamp, or enter the 8-digit setup code above the QR code to grant the Apple Home app access.
- Make sure a Wi-Fi network with Internet access is available (this product does not support 5 GHz networks). To control this HomeKit-compatible accessory, it is recommended that you use iOS 9.0 or above. The HomeKit setup code is in the user manual and on the lamp, do not lose it. When adding the product to the Home app after
the factory settings are restored, you will need the HomeKit setup code again. In case the user manual is lost, scan the QR code or enter the setup code on the lamp.
iPad and iPhone are the trademarks of Apple Inc., and they areregistered in the United States and other countries.
Specification
| Model: | YLQPD-0011 |
|---|---|
| Lamp Holder: | E27 |
| Rated Power: | 9 W |
| Luminous Flux: | 806 lumens |
| Rated Input: | 220-240 V ~ 50/60 Hz 0.085 A |
| Color Temperature Range: | 2700 ‒6500 K |
| Wireless Connectivity: | Wi-Fi IEEE 802.11 b/g/n 2.4 GHz |
| Service Life: | Approx. 15,000 h |
| Operating Temperature: | -10°C to 40°C |
| Operating Humidity: | 0 ‒85% RH |
| Operating Frequency: | 2412 ‒ 2480 MHz |
| Maximum Output Power: | 20 dBm |
| Dimensions: | ф60×110 mm |
Product Features
Warning
- Before using this product, please make sure that your voltage is appropriate for this product’s working voltage. Using this product with a voltage other than the one specied may damage the product and cause safety hazards.
- Do not disassemble this product, as the light diodes can cause damage to the eyes.
- The light bulb will heat up when working. Do not use it in a conned holder for an extended period of time. Ensure sufficient ventilation for the light bulb to allow for heat dissipation.
- For indoor use only.
- Disconnect power before installation to prevent risk of electronic shock.
- Use in Dry Locations only.
- For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lamp holders and may impair contact making and lamp retention.
- Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2
years. If you need repair or other services during the warranty period,
contact the product seller directly, you must provide the original proof of
purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions,
for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
Hereby, Qingdao Yeelink Information Technology Co.,Ltd., declares that the radio equipment type YLQPD-0012 is in compliance with Directive 2014/53/EU.
EU Declaration of Conformity
Identification data of the manufacturer’s / importer’s authorized
representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Smart LED Bulb
Model / Type: W4L
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. 2014/30/EU
Directive No. 2014/35/EU
Directive No. 2014/53/EU
Directive No. 2009/125/EU
Directive No. 2011/65/EU as amended 2015/863/EU
Prague, 23.12. 2022
WEEE
This product must not be disposed of as normal household waste in
accordance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase
or handed over to a public collection point for the recyclable waste. By
ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
Contact your local authority or the nearest collection point for further
details. Improper disposal of this type of waste may result in fines in
accordance with national regulations.
References
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
- Alza | Alza.co.uk
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz
- alza.de
- alza.hu
- alza.sk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>