attwoodmarine 6100-LT-7 PowerBase Light – Automated Light Mount Instruction Manual
- June 9, 2024
- attwoodmarine
Table of Contents
6100-LT-7 PowerBase Light – Automated Light Mount
Instruction Manual
6100-LT-7 PowerBase Light – Automated Light Mount
PowerBase Series New
The intelligent, automated folding light and Antenna.
Why PowerBase
PowerBase easily stows and deploys lights and antennas with the push of a
button
PowerBase is the only intelligent light/antenna with object detection
technology
- SafeGuard Breakaway – In the event of an impact, powerbase will safely return to stowed position preventing potential damage to fiberglass top.
- SmartDeploy Backdrive – In the event of a blocked deployment, PowerBase senses an obstruction and reverses the light/antenna back to it starting position.
PowerBase is designed for worry-free installation and operation from assembly line to marina
- Standardized mounting patterns allow for upgradeability.
- Intuitive control without switch limitations.
PowerBase is compatible/built with the leading industry equipment
- For use with antennas up to 8 ft. In length (Powerbase Antenna).
- Available in masthead and all-round configurations featuring Attwood’s LightArmor LED technology (PowerBase Light).
Additional Features
Powered Fold-down Control at the Helm| Easily fold down navigation lights and
antennas without needing to dangerously climb seats, ladders, or gunwales
---|---
Safeguard Breakaway| Keep peace of mind knowing that upon impact with a bridge
or branch, unit will breakaway preventing damage to your light, antenna, and
hard-top
SmartDeploy Backdrive| Deploy lights and antennas without worry as the unit
senses obstructions and automatically retracts – all the while notifying you
of the obstruction
Intuitive Control Without Switch Limitations| Simplistic control scheme
ensures boaters are always kept in control, without forcing proprietary
switches
Visual System State Feedback| LED feedback makes boaters aware of failures to
ensure that they’re always compliant, even if there is a mechanical/electronic
failure on the vessel
Uses Existing Standardized Mounting Patterns| Ensures builders and boaters
alike can utilize existing tooling to replace current manual fixtures
Follows Existing Wiring Paths| Wiring follows path of existing manual fold-
down lights to the digital/analog switch for feedback and control
Manual Adjustment Failsafe| Easy to use manual override ensures boaters can
always deploy lights in the event of system failure
180° Range of Motion| PowerBase may be mounted so that the light/antenna folds
toward a boat’s stern or bow
| PowerBase Antenna| PowerBase Light| LightArmor
All-Around Navigation Light| LightArmor
Masthead/Anchor Navigation Light
---|---|---|---|---
Part #| 6100-AT-1| 6100-LT-1| 24″| 5590-24-1| 24″| 7800-24-1
30″| 5590-30-1| —| —
36″| 5590-36-1| 36″| 7800-36-1
42″| 5590-42-1| 42″| 7800-42-1
Compatibility| Compatible with all leading
1-1/4″ threaded VHF Antennas (8ft or less length)| Compatible with Attwood
LightArmor LED All-Round and Masthead Nav Lights| For powered vessels under
39.4′| For powered vessels between 39.5’–65′
Key Features| SafeGuard Breakaway – In the event of an impact, unit
will safely breakaway to protect light, antenna, and costly
hardtop damage.| LightArmor LED – See and be seen with industry leading
Navigation
Technology, rated for 50,000+ hours of usage.
SmartDeploy Backdrive – In the event of an
obstruction, PowerBase will intelligently return to
previous position while informing the user of the
obstructed movement.| The Perfect Fit, Every Time – LightArmor Navigation
Lights are easily
installed and fully compatible with all PowerBase Light models.
PowerBase Mounting Pattern Compatibility / Attachment Options
Documents / Resources
|
attwoodmarine 6100-LT-7 PowerBase Light - Automated Light
Mount
[pdf] Instruction Manual
6100-LT-7 PowerBase Light - Automated Light Mount, 6100-LT-7, PowerBase Light
- Automated Light Mount, Automated Light Mount
---|---