ET2 Contemporary Lighting E23111-18 Larmes 1-Light Pendant Instruction Manual
- June 9, 2024
- ET2 Contemporary Lighting
Table of Contents
ET2 Contemporary Lighting E23111-18 Larmes 1-Light Pendant
- ITEM NUMBER : E23111-18
- DESCRIPTION : Larmes 1-Light Pendant
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
- Do not overtighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Low Voltage LED Lighting Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
- WARNING : Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur.
- Do not cut factory connections unless instructed by the manufacturer
- Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
- Clean with soft cloth and a mild detergent.
- DO not use abrasive cleaner.
- Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
PARTS
Before getting,started,ensure the package contains the following components:
INSTALLATION INSTRUCTIONS
WIRING DIAGRAM (ONLY FOR REFERENCE)
DO NOT ATTEMPT TO CUT FACTORY CONNECTIONS WITHOUT QUALIFIED KNOWLEDGE. MODIFICATIONS MADE TO THIS PRODUCT WITHOUT THE CONSENT OF THE MANUFACTURER WILL VOID WARRANTY.
SCHEMATIC FOR GENERAL REFERENCE ONLY
If fixture does not light, reverse polarity.
FOR OPTIMAL USE
Lutron: Leviton
- TGCL-153PR 6672(1 B4605)
- TGCL-153PH 6631 (1 D4505)
- CTCL-153PDH REL06-WW
- CTCL-153PR Cooper SAL06P
- SCL-153PR ML06-C2
- DVWCL-153PH Eaton SAL06P-W-2K-L
- DVCL-153PR Legrand LSCL453PWCCV4
Must be installed by a licensed electrician with knowledge of electronic lighting systems
SEND PRODUCT INQUIRIES TO INFO@ET20NLINE.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>