Fudajo 61945 Car Safety Guards for Dogs User Manual
- June 9, 2024
- Fudajo
Table of Contents
Fudajo 61945 Car Safety Guards for Dogs
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical
data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities,
please contact us.
The information contained in this document may alter at any time without
previous notice. It is prohibited to copy or spread any parts of this document
in any way without prior written allowance. All rights re-served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible
mistakes in this operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible
efforts to ensure that the operating manual is complete, faultless, and up to
date, mistakes cannot be entirely avoided. If you should find a mistake or
wish to make a suggestion for improvement, we look forward to hearing from
you.
Send an e-mail to: service@wiltec.info
or use our contact form: https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in
our online shop via: https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the
following address. Attention! To allow for a smooth execution of your
complaint or return, it is important to contact our customer service team
before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury
we urge that our clients take some basic safety precautions when using this
device. Please read the operation instruc-tions carefully and make sure you
have understood its content.
Keep these operation instructions safe.
Scope of delivery
Assembly
Step 1
Slide each 4 plastic clamp brackets (B) over the ver-tical bracing (A). Then
slide two horizontal braces (C) and two end brackets (D) into each other,
opposite each other.
Step 2
Now press the horizontal braces (C) that you have just mounted into the slid-
on plastic clamp bracket (B).
Step 3
Insert the screws (F) through the screw attach-ments (G) and then through the
lowest hole of the vertical bracing (A). Then, depending on the vehicle
construction, select the plastic hooks (E) and screw them onto the screws (F).
The dog guard is now ready to be mounted in the vehicle.
- Hook the plastic hooks (E) onto the head-rest rods and tighten the screw tops (G).
- You can now move the horizontal brac-ing (C) to the desired height and pull out the end brackets (D) to the desired width.
- Then tighten the screw ends of the plastic clamp brackets (B).
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in
part, of this instruction manual require the written permission of WilTec
Wildanger Technik GmbH.
© by WilTec Wildanger Technik GmbH http://www.fudajo.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>