Fudajo 62395 XXL Open Enclosure User Manual
- June 4, 2024
- Fudajo
Table of Contents
Fudajo 62395 XXL Open Enclosure
Information
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved. WilTec Wildanger Technik GmbH
cannot be held liable for any possible mistakes in this operating manual, nor
in the diagrams and illustrations shown. Although WilTec Wildanger Technik
GmbH has made every possible effort to ensure that this operating manual is
complete, accurate, and up-to-date, errors cannot be ruled out entirely. If
you have found an error or wish to suggest an improvement, we look forward to
hearing from you.
Send us an e-mail to: service@wiltec.info
or use our contact form: https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in
our online shop: https://www.wiltec.de/docsearch
Our postal address is:
To return your goods for exchange, repair, or other purposes, please use the
following address. Attention! To allow for a trouble-free complaint or return,
it is important to contact our customer service team before returning your
goods.
E-mail: service@wiltec.info
Phone: +49 2403 55592–0
Fax: (+49 2403 55592–15)
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.
Assembly
Parts lists
Name | Qty. | Name | Qty. |
---|---|---|---|
U bolt | 4 | M8×15 screws (door) | 14 |
Roof | 1 | Wing screw | 40 |
Rubber rope (roof) | 1 | Self-tapping M5.5×19 screw | 10 |
Wire for tying | 1 | Socket wrench 12/14 mm |
8 mm (for self-tapping screw)
| 1
1
Cable tie| 1| Cap for “G” part Cap for door| 2
6
M8 square head screw| 20| Shaft bolt| 2
Nuts| 20| Mesh wire (hexagon)| 1
Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH.